Skip to contentSkip to conversation

-- no soundcards --

DISCUSSION Han-Solo 1 participant 1 message Apr 9, 2002

lore
Share & tools
lore

Han-Solo

author
#0 lore raw

Hello all,

I could not make my audigy work with the 5.12a driver. The following message shows up in /var/log/messages :

snd: EMU10K1 soundcard #1 not found or device busy

My kernel is compiled with CONFIG_SOUND=m and CONFIG_SOUND_OSS=m

The driver was compiled with these options :
./configure --with-oss=yes --with-cards=emu10k1 --with-debug=detect

I disabled devfsd in lilo.conf (yes, it is a Mandrake) and launched snddevices after installation, changed the perms of /dev/mixer, /dev/dsp, /dev/audio, put the following lines into modules.conf :

alias char-major-116 snd
alias snd-card-0 snd-card-emu10k1
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

lspci -v gives :
...
00:0f.0 Multimedia audio controller: Creative Labs: Unknown device 0004
(rev 03) Subsystem: Creative Labs: Unknown device 0053
Flags: bus master, medium devsel, latency 32, IRQ 4 I/O ports at c400 [size=32]
Capabilities: [dc] Power Management version 2

cat /proc/interrupts

    0:     228061          XT-PIC  timer
    1:       2688          XT-PIC  keyboard
    2:          0          XT-PIC  cascade
    5:       1290          XT-PIC  usb-uhci
    8:          1          XT-PIC  rtc
   10:     167420          XT-PIC  nvidia
   11:       9658          XT-PIC  ide2
   12:      74372          XT-PIC  PS/2 Mouse
   14:         35          XT-PIC  ide0
   15:         40          XT-PIC  ide1
NMI:          0
LOC:     228026
ERR:          0
MIS:          0

(dont't know if this is OK. Should I see a line for IRQ 4 ?)

cat /proc/ioports
...
c400-c41f : PCI device 1102:0004 (Creative Labs)
c800-c807 : PCI device 1102:7003 (Creative Labs)

cat /proc/asound/cards gives : "-- no soundcards --" (hence the subject)

I read lots of stuff using google, tried a few things. My last attempt was to replace snd-emu10k1 by snd-card-emu10k1, though I got no errors (and still -- no soundcards -- ) with snd-emu10k1.
The alsaconf script could not detect my card.

The card works with the OSS module in the kernel, and under Windows.

Did I forget something ? Please, tell me what's wrong !