Skip to contentSkip to conversation

Mirroring

DISCUSSION Mohamed Farouk 2 participants 2 messages Apr 11, 2002 MD RAID

lore
Share & tools
lore
#0 lore raw

Dear Sir

First i read about your experience in the Unix Administration, and it is ereal great, hoping one day to reach your point.

Second, i have a question concerning the Mirroring technique as i use it here, knowing that i am working with RedHat linux 7.2. My question is:

How can i make the slave or the backup disk bootable in case of master disk crash?

More exploration:

I have 2 hard disks, one is the master and the other is the slave or the backup, or the mirror (whatever), i finished installing them and they are working fine (till now !!), but when i make a test to remove anyone to see if the other will work properly (as this will be the case in case of anyone of them crash), i found that the master one is working fine (which contain the boot commands) while the other failed to boot. I tried to put a bootable disk but it gives me something related to kernel panics.

Your help will be much appreciatted:

Signature · 18 lines
Mohamed Farouk
System Engineer
IT Dept.
MEMScAP
9 St, Ebn Batouta, Beside the Baron, Cairo, Egypt
Tel: 4146860 Ext: 102
Mobile: 0101828653
http://www.memscap.com


-------------------------------------------------------------------------
"This message and any attachment are confidential and may be privileged
or otherwise protected from disclosure.  If you are not the intended
recipient, please telephone or email the sender and delete this message
and any attachment from your system.  If you are not the intended
recipient you must not copy this message or attachment or disclose the
contents to any other person."
-------------------------------------------------------------------------
#1 lore raw

Dear Mr Farouk,

Quoted 4 lines

(which contain the boot commands) while the other failed to boot. I tried to put a bootable disk but it gives me something related to kernel panics.

I assume that you wrote the bootdisk when your master disk was running. So the LILO searches for the root partition on the master disk. When there is no master disk it fails to read it. I think it should be enough to write a new MBR with an alternate lilo.conf, which tells the kernel to boot not the master disks root partition but the slave root partition. In other words search for the entry root=. It might say something like root=/dev/hda1. Change it to the slave disk, eg root=/dev/hdb1 (This example assumes master / in hda1 and slave / on hdb1). Probably lilo won't write to MBR and complains about hdb being not first disk. But you can fake this entry. I can't remember the rigth syntax. But I think a quick google search should solve this problem.

Best wishes,

Gernot Weber

Signature · 7 lines
Gernot A. Weber
http://www.tux-web.de

Only wimps use tape backup: _real_ men just upload their important stuff
on ftp, and let the rest of the world mirror it.

                              Linus Torvalds, after a hard drive crash