Skip to contentSkip to conversation

ppcboot on 823e RPXlite config?

DISCUSSION [email protected] 2 participants 2 messages Apr 26, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

Does anybody on the list has the configuration files for ppcboot on a RPX lite board with an MPC823e processor? In ppcboot 1.1.5 this board is set to a MPC850 cpu, but the one I have over here is a MPC823e one.

Regards,
Bart Thissen

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

Does anybody on the list has the configuration files for ppcboot on a

You would get _much_ better response on the ppcboot-users mailing list.

Quoted 2 lines

RPX lite board with an MPC823e processor? In ppcboot 1.1.5 this board is set to a MPC850 cpu, but the one I have over here is a MPC823e one.

Software-wise there is little difference between a 850 and a 823, except for the obvious details like the fact that there is no LCD controller on the 850.

I don't know the RPXlite, but on TQM8xxL tha image for the TQM850L will also provide basic functionality on a TQM823L (missing LCD output, of course).

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected]
A list is only as strong as its weakest link. -- Don Knuth

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/