Skip to contentSkip to conversation

2.5.15 hangs at partition check

DISCUSSION Pierre Rousselet 5 participants 5 messages May 10, 2002

lore
Share & tools
lore

Pierre Rousselet

author
#0 lore raw

PIII / Abit BE6 HPT366, devfs.

2.5.15 doesn't boot, the last lines are :

hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0:

2.5.14 works, it gives :
hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1

Signature · 4 lines
Pierre
------------------------------------------------
 Pierre Rousselet <[email protected]>
------------------------------------------------
#1 lore raw

Hi,

Quoted 9 lines · Pierre Rousselet

PIII / Abit BE6 HPT366, devfs.

2.5.15 doesn't boot, the last lines are :

hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0:

Quoted 6 lines

2.5.14 works, it gives :
hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1

Hi,

i have the same problem on Abit BP6 with HPT366 and Kernel 2.4.18 based on SuSE 8.0 SMP-Kernel.

Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1 hdc2 hdc3 hdc4
hde:

Failsave-Kernel of this Distribution works fine.

Here some Infos:

starflake:/sbin # uname -a
Linux starflake 2.4.18-64GB-SMP #1 SMP Wed Mar 27 13:58:12 UTC 2002 i686 unknown starflake:/sbin # cat /etc/SuSE-release
SuSE Linux 8.0 (i386)
VERSION = 8.0

Pierre

#2 lore raw
Quoted 23 lines · Pierre Bernhardt

Hi,

Quoted 9 lines · Pierre Rousselet

PIII / Abit BE6 HPT366, devfs.

2.5.15 doesn't boot, the last lines are :

hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0:

Quoted 6 lines

2.5.14 works, it gives :
hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1

Hi,

Quoted 7 lines

i have the same problem on Abit BP6 with HPT366 and Kernel 2.4.18 based on SuSE 8.0 SMP-Kernel.

Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1 hdc2 hdc3 hdc4
hde:

Tried to disable ACPI ?

#3 lore raw
In reply to Pierre Rousselet
Quoted 27 lines

[Xavier Bestel <[email protected]>, May-10 2002, Fri, 10:40 +0200]

Quoted 25 lines · Pierre Bernhardt
Quoted 9 lines · Pierre Rousselet

PIII / Abit BE6 HPT366, devfs.

2.5.15 doesn't boot, the last lines are :

hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0:

Quoted 6 lines

2.5.14 works, it gives :
hde: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdg: 6250608 sectors w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1

Hi,

i have the same problem on Abit BP6 with HPT366 and Kernel 2.4.18 based on SuSE 8.0 SMP-Kernel.

Quoted 6 lines
Quoted 4 lines

Partition check:
hda: hda1 hda2 hda3 hda4
hdc: hdc1 hdc2 hdc3 hdc4
hde:

Tried to disable ACPI ?

I don't think ACPI compiles in 2.5.15.

In file included from /usr/src/linux-2.5.15/arch/i386/pci/acpi.c:2:
.tmp_include/src_000/include/linux/acpi.h:38: ../../drivers/acpi/include/acpi.h: No such file or directory In file included from /usr/src/linux-2.5.15/arch/i386/pci/acpi.c:2:
.tmp_include/src_000/include/linux/acpi.h:294: parse error before cpi_generic_address' .tmp_include/src_000/include/linux/acpi.h:294: warning: no semicolon at end of struct or union
.tmp_include/src_000/include/linux/acpi.h:295: warning: type defaults to nt' in declaration of c_data'
.tmp_include/src_000/include/linux/acpi.h:295: warning: data definition has no type or storage class .tmp_include/src_000/include/linux/acpi.h:299: parse error before }' .tmp_include/src_000/include/linux/acpi.h:299: warning: empty declaration .tmp_include/src_000/include/linux/acpi.h:363: parse error before cpi_handle' .tmp_include/src_000/include/linux/acpi.h:363: warning: no semicolon at end of struct or union .tmp_include/src_000/include/linux/acpi.h:363: warning: no semicolon at end of struct or union .tmp_include/src_000/include/linux/acpi.h:365: parse error before }'
.tmp_include/src_000/include/linux/acpi.h:365: warning: type defaults to nt' in declaration of ource'
.tmp_include/src_000/include/linux/acpi.h:365: warning: data definition has no type or storage class .tmp_include/src_000/include/linux/acpi.h:366: parse error before }'
pp_makefile5: Main command (pid 3685) returned 1
make[1]: *** [arch/i386/pci/acpi.o] Error 1

T.

#4 lore raw
Quoted 4 lines · Tomas Szepe

I don't think ACPI compiles in 2.5.15.

In file included from /usr/src/linux-2.5.15/arch/i386/pci/acpi.c:2:
.tmp_include/src_000/include/linux/acpi.h:38: ../../drivers/acpi/include/acpi.h: No such file or directory

That is a missing cflags in a kbuild 2.5 Makefile.in. Add

extra_cflags(acpi.o $(fixme_acpi_includes))

to the end of arch/i386/pci/Makefile.in.