can't boot with DiskOnChip2000 / nftlmount UnitSizeFactor ????
well, sorry, in my last mail I titled about UnitSizeFactor != 1, but didn't speak about it.
So, i'm wondering about this check (in drivers/mtd/nftlmount.c in kernel 2.4.x)
is there any info to make my nftlmount works, even if i have this message? ("Sorry, we don't support UnitSizeFactor of != 1 yet.")
here is my dmesg about DOC2000:
Possible DiskOnChip with unknown ChipID FF found at 0xc8000 Possible DiskOnChip with unknown ChipID FF found at 0xca000 Possible DiskOnChip with unknown ChipID FF found at 0xcc000 Possible DiskOnChip with unknown ChipID FF found at 0xce000 DiskOnChip 2000 found at address 0xD0000
Flash chip found: Manufacturer ID: 98, Chip ID: 75 (Toshiba TC58256FT/DC) 2 flash chips found. Total DiskOnChip size: 64 MiB
Ignoring DiskOnChip 2000 at 0xD2000 - already configured Possible DiskOnChip with unknown ChipID FF found at 0xd4000 Possible DiskOnChip with unknown ChipID FF found at 0xd6000 Possible DiskOnChip with unknown ChipID FF found at 0xd8000 Possible DiskOnChip with unknown ChipID FF found at 0xda000 Possible DiskOnChip with unknown ChipID FF found at 0xdc000 Possible DiskOnChip with unknown ChipID FF found at 0xde000 Possible DiskOnChip with unknown ChipID 00 found at 0xe0000 Possible DiskOnChip with unknown ChipID 00 found at 0xe2000 Possible DiskOnChip with unknown ChipID 00 found at 0xe4000 Possible DiskOnChip with unknown ChipID 00 found at 0xe6000 Possible DiskOnChip with unknown ChipID 00 found at 0xe8000 Possible DiskOnChip with unknown ChipID 00 found at 0xea000 Possible DiskOnChip with unknown ChipID 00 found at 0xec000 Possible DiskOnChip with unknown ChipID 00 found at 0xee000 NFTL driver: nftlcore.c $Revision: 1.82 $, nftlmount.c $Revision: 1.25 $ Sorry, we don't support UnitSizeFactor of != 1 yet.
Could not find valid boot record
Could not mount NFTL device
I would really appreciate any help of any type, as i spent too much time on this, and my boss is very strong at aïkido, kick-boxing and all this stuff... ;-)
thanks in advance!
Fred
Quoted 2 lines · Frederic Marmond
is there any info to make my nftlmount works, even if i have this message? ("Sorry, we don't support UnitSizeFactor of != 1 yet.")
I circumvented such problem by re-formatting the chip with the MTD nftlformat utility. The latter has a built-in check for erase block size which you may need to remove if you find the risk acceptable.
Ilguiz
...
i made a "nftl_format /dev/mtd0 2097152", from the lastest CVS from mtd-tool...
it works fine, and i can make a fs (ext2) on /dev/nftla1 (after, of course having made a fdisk /dev/nftla)
but the message still remain at boot time (see it in dmesg NFTL driver: nftlcore.c $Revision: 1.82 $, nftlmount.c $Revision: 1.25 $ Sorry, we don't support UnitSizeFactor of != 1 yet.
Could not find valid boot record
Could not mount NFTL device
)
this check is in nftlmount.c in kernel directory (drivers/mtd/nftlmount.c) do you mean that i can comment this check?
do you know what is the risk?
Fred
Quoted 13 lines · Ilguiz Latypov
Quoted 3 lines · Frederic Marmond
is there any info to make my nftlmount works, even if i have this message? ("Sorry, we don't support UnitSizeFactor of != 1 yet.")
I circumvented such problem by re-formatting the chip with the MTD nftlformat utility. The latter has a built-in check for erase block size which you may need to remove if you find the risk acceptable.
Ilguiz