How to update firmware on c180 using a cd rom
A message that is not in the archive (sent off-list or not yet received): [email protected]
Thaddeus A Wilson writes...
Quoted 7 lines
i have a c180 with the hrc-24 graphics card and would like to install parisc linux on it. i am having some troubles and thought that an update in the firmware from 4.3 to 6.2 might help matters. i am interested in converting the lifimage to cd and booting from it.
maybe i could unpack the lifimage to a directory and use mkisofs and cdrecord to make a bootable cd from iso image?
Just burn it directly to a cd with cdrecord, no need for mkisofs.
Your other options are,
- netboot it using bootp/dhcp and tftp
- dd it to a scsi device like a hard-drive or dat tape, and boot that
Signature · 2 lines
Matt Taggart [email protected]
Thaddeus A Wilson writes...
Quoted 7 lines
i have a c180 with the hrc-24 graphics card and would like to install parisc linux on it. i am having some troubles and thought that an update in the firmware from 4.3 to 6.2 might help matters. i am interested in converting the lifimage to cd and booting from it.
maybe i could unpack the lifimage to a directory and use mkisofs and cdrecord to make a bootable cd from iso image?
Just burn it directly to a cd with cdrecord, no need for mkisofs.
Your other options are,
- netboot it using bootp/dhcp and tftp
- dd it to a scsi device like a hard-drive or dat tape, and boot that
Signature · 2 lines
Matt Taggart [email protected]