Pb with ioctl and 64bits
Hi
I'm loosing my nerves. I'm stuck with it since two days, and I don't understand :-( My ioctls are running fine with 32bits kernel. I thought I've done everything fine, but when compiling it with 64 bits kernel it fail with:sys32_ioctl: Unknown cmd fd(3) cmd(80047001) arg(00000803)
So my question is: what is the difference between 32bits and 64bits kernel about the ioctls ?
I think that arch/parisc/kernel/ioctl32.c is used with 64bits and not with 32bits, right ?
If yes, what I need to do more than:
#if defined(CONFIG_DUMP) || defined(CONFIG_DUMP_MODULE) COMPATIBLE_IOCTL(DIOSDUMPDEV); COMPATIBLE_IOCTL(DIOGDUMPDEV); COMPATIBLE_IOCTL(DIOSDUMPLEVEL); COMPATIBLE_IOCTL(DIOGDUMPLEVEL); COMPATIBLE_IOCTL(DIOSDUMPFLAGS); COMPATIBLE_IOCTL(DIOGDUMPFLAGS); COMPATIBLE_IOCTL(DIOSDUMPCOMPRESS); COMPATIBLE_IOCTL(DIOGDUMPCOMPRESS); COMPATIBLE_IOCTL(DIOGDINDEX);
#endif /* DUMP */
thanks.
Signature · 3 lines
Vidal Bruno, (770-4271)
SSD-HA Team, HP-UX & LINUX Support
[email protected]begin:vcard
n:Bruno;VIDAL
tel;fax:01-69-82-60-14
tel;work:01-69-29-42-71
x-mozilla-html:TRUE
url:www.france.hp.com
org:Solution Center
version:2.1
email;internet:[email protected]
title:Expert Logiciel Environnement Haute Disponibilité
adr;quoted-printable:;;HP France=0D=0A;Z.A de Courtaboeuf;1 Av. du Canada;91947 Les Ulis cedex;France x-mozilla-cpt:;26208
fn:VIDAL Bruno
end:vcard
Quoted 6 lines
I'm loosing my nerves. I'm stuck with it since two days, and I don't understand :-( My ioctls are running fine with 32bits kernel. I thought I've done everything fine, but when compiling it with 64 bits kernel it fail with:
sys32_ioctl: Unknown cmd fd(3) cmd(80047001) arg(00000803)
So my question is: what is the difference between 32bits and 64bits kernel about the ioctls ?
as you discovered, there's some translation that is needed for 64-bit kernels because userspace is always 32-bits. So when running a 64-bit kernel, some ioctls need to be translated via the logic in ioctl32.c. The situation is similar to sparc32/sparc64.
Quoted 1 line
I think that
arch/parisc/kernel/ioctl32.cis used with 64bits and not with 32bits, right ?
yes.
Quoted 4 lines
If yes, what I need to do more than:
#ifdefined(CONFIG_DUMP)||defined(CONFIG_DUMP_MODULE)COMPATIBLE_IOCTL(DIOSDUMPDEV);COMPATIBLE_IOCTL(DIOGDUMPDEV);
Quoted 8 lines
COMPATIBLE_IOCTL(DIOSDUMPLEVEL);COMPATIBLE_IOCTL(DIOGDUMPLEVEL);COMPATIBLE_IOCTL(DIOSDUMPFLAGS);COMPATIBLE_IOCTL(DIOGDUMPFLAGS);COMPATIBLE_IOCTL(DIOSDUMPCOMPRESS);COMPATIBLE_IOCTL(DIOGDUMPCOMPRESS);COMPATIBLE_IOCTL(DIOGDINDEX);
#endif /* DUMP */
what are the ioctl definitions used by the dump driver? (the _IO{,R,W,RW} values). From the output you pasted:
Quoted 1 line
sys32_ioctl: Unknown cmd fd(3) cmd(80047001) arg(00000803)
that ioctl seems to be _IOW('p', 1, int) (or unsigned int or so)?
randolph
Hi
Yes, I've follow nearly the same than "PA_PERF_ON", "PA_PERF_OFF". I've used:
#define DIOSDUMPDEV _IOW('p',1,unsigned long) /* set the dump device */
#define DIOGDUMPDEV _IOR('p',2,unsigned long) /* get the dump device */
#define DIOSDUMPLEVEL _IOW('p',3,unsigned long) /* set the dump level */
#define DIOGDUMPLEVEL _IOR('p',4,unsigned long) /* get the dump level */
#define DIOSDUMPFLAGS _IOW('p',5,unsigned long) /* set the dump flag parameters */
#define DIOGDUMPFLAGS _IOR('p',6,unsigned long) /* get the dump flag parameters */
#define DIOSDUMPCOMPRESS _IOW('p',7,unsigned long) /* set the dump compress level */
#define DIOGDUMPCOMPRESS _IOR('p',8,unsigned long) /* get the dump compress level */
#define DIOGDINDEX _IOR('p',9,unsigned long) /* get the number of configured device */ But I don't understand what's wrong, does I need to declare something else somewhere else ????
Quoted 38 lines · Randolph Chung
Quoted 7 lines
I'm loosing my nerves. I'm stuck with it since two days, and I don't understand :-( My ioctls are running fine with 32bits kernel. I thought I've done everything fine, but when compiling it with 64 bits kernel it fail with:
sys32_ioctl: Unknown cmd fd(3) cmd(80047001) arg(00000803)
So my question is: what is the difference between 32bits and 64bits kernel about the ioctls ?as you discovered, there's some translation that is needed for 64-bit kernels because userspace is always 32-bits. So when running a 64-bit kernel, some ioctls need to be translated via the logic in
ioctl32.c. The situation is similar to sparc32/sparc64.Quoted 1 line
I think that
arch/parisc/kernel/ioctl32.cis used with 64bits and not with 32bits, right ?yes.
Quoted 4 lines
If yes, what I need to do more than:
#ifdefined(CONFIG_DUMP)||defined(CONFIG_DUMP_MODULE)COMPATIBLE_IOCTL(DIOSDUMPDEV);COMPATIBLE_IOCTL(DIOGDUMPDEV);Quoted 8 lines
COMPATIBLE_IOCTL(DIOSDUMPLEVEL);COMPATIBLE_IOCTL(DIOGDUMPLEVEL);COMPATIBLE_IOCTL(DIOSDUMPFLAGS);COMPATIBLE_IOCTL(DIOGDUMPFLAGS);COMPATIBLE_IOCTL(DIOSDUMPCOMPRESS);COMPATIBLE_IOCTL(DIOGDUMPCOMPRESS);COMPATIBLE_IOCTL(DIOGDINDEX);
#endif /* DUMP */what are the ioctl definitions used by the dump driver? (the _IO{,R,W,RW} values). From the output you pasted:
Quoted 1 line
sys32_ioctl: Unknown cmd fd(3) cmd(80047001) arg(00000803)that ioctl seems to be
_IOW('p', 1, int)(or unsigned int or so)?randolph
Signature · 3 lines
Vidal Bruno, (770-4271)
SSD-HA Team, HP-UX & LINUX Support
[email protected]begin:vcard
n:Bruno;VIDAL
tel;fax:01-69-82-60-14
tel;work:01-69-29-42-71
x-mozilla-html:TRUE
url:www.france.hp.com
org:Solution Center
version:2.1
email;internet:[email protected]
title:Expert Logiciel Environnement Haute Disponibilité
adr;quoted-printable:;;HP France=0D=0A;Z.A de Courtaboeuf;1 Av. du Canada;91947 Les Ulis cedex;France x-mozilla-cpt:;26208
fn:VIDAL Bruno
end:vcard
Haaaaa, I've succeded at the end. Now ioctls are working fine.
Sorry, I beg your pardon, the probleme was coming from the manner I declare my ioctls cmds. With 64bits kernel it is:
#define DIOSDUMPDEV32 _IOW('p',0xa0,unsigned int)
And in user space it is (32 bits):
#define DIOSDUMPDEV32 _IOW('p',0xa0,unsigned long)
Thanks.
Signature · 3 lines
Vidal Bruno, (770-4271)
SSD-HA Team, HP-UX & LINUX Support
[email protected]begin:vcard
n:Bruno;VIDAL
tel;fax:01-69-82-60-14
tel;work:01-69-29-42-71
x-mozilla-html:TRUE
url:www.france.hp.com
org:Solution Center
version:2.1
email;internet:[email protected]
title:Expert Logiciel Environnement Haute Disponibilité
adr;quoted-printable:;;HP France=0D=0A;Z.A de Courtaboeuf;1 Av. du Canada;91947 Les Ulis cedex;France x-mozilla-cpt:;26208
fn:VIDAL Bruno
end:vcard
Quoted 1 line · Bruno Vidal
Haaaaa, I've succeded at the end. Now ioctls are working fine.
Excellent!
Quoted 5 lines
Sorry, I beg your pardon, the probleme was coming from the manner I declare my ioctls cmds. With 64bits kernel it is:
#define DIOSDUMPDEV32_IOW('p',0xa0,unsigned int)
And in user space it is (32 bits):
#define DIOSDUMPDEV32_IOW('p',0xa0,unsigned long)
shouldn't both kernel and user space use the same definition? (ie unsigned int)
If they don't, I expect the ioctl wrapper to do some work.
grant