Skip to contentSkip to conversation

2.5.6 lm_sensors

PATCH In review Albert Cranford 1 participant 1 message Jul 19, 2002

Subsystems (2)
I2C subsystem host drivers I2C
lore
Share & tools
lore

Albert Cranford

author
#0 lore raw

PATCH 7/9 2.5.6 lm_sensors

Hello Linus,
The i2c & lm_sensors group would like to submit these 9 patches from our stable 2.6.3 package.

This group of patches adds hardware sensor for boards and chips. They are considered stable and have been in use since March 2002.

Over the next weeks we will be updating the kernel with our beta release 2.6.4 and documentation patches. Thanks,
Albert

Signature · 2 lines
Albert Cranford Deerfield Beach FL USA
[email protected]
drivers/i2c/Config.in renamed from drivers/i2c/Config.in.orig +2 -0
@@ -45,5 +45,7 @@
    dep_tristate 'I2C device interface' CONFIG_I2C_CHARDEV $CONFIG_I2C
    dep_tristate 'I2C /proc interface (required for hardware sensors)' CONFIG_I2C_PROC $CONFIG_I2C $CONFIG_SYSCTL
 
+  source drivers/i2c/busses/Config.in
+  source drivers/i2c/chips/Config.in
 fi
 endmenu
drivers/i2c/Makefile renamed from drivers/i2c/Makefile.orig +2 -0
@@ -16,6 +16,8 @@
 obj-$(CONFIG_ITE_I2C_ALGO)	+= i2c-algo-ite.o
 obj-$(CONFIG_ITE_I2C_ADAP)	+= i2c-adap-ite.o
 obj-$(CONFIG_I2C_PROC)		+= i2c-proc.o
+obj-$(CONFIG_MAINBOARD)		+= busses/
+obj-$(CONFIG_SENSORS)		+= chips/
 
 # This is needed for automatic patch generation: sensors code starts here
 # This is needed for automatic patch generation: sensors code ends here
drivers/i2c/busses/Config.in new file +32 -0
@@ -0,0 +1,32 @@
+#
+# Sensor device configuration
+# All depend on CONFIG_I2C_PROC.
+# ISA-only devices depend on CONFIG_I2C_ISA also.
+#
+
+if [ "$CONFIG_I2C" = "m" -o "$CONFIG_I2C" = "y" ] ; then
+if [ "$CONFIG_I2C_PROC" = "m" -o "$CONFIG_I2C_PROC" = "y" ] ; then
+  mainmenu_option next_comment
+  comment 'Hardware sensors mainboard support'
+  
+  dep_mbool 'Hardware sensors mainboard support' CONFIG_MAINBOARD $CONFIG_I2C $CONFIG_I2C_PROC
+  
+  if [ "$CONFIG_MAINBOARD" = "y" ]; then
+    tristate '  Acer Labs ALI 1535' CONFIG_I2C_ALI1535 
+    tristate '  Acer Labs ALI 1533 and 1543C' CONFIG_I2C_ALI15X3 
+    tristate '  AMD 756/766' CONFIG_I2C_AMD756
+    dep_tristate '  Apple Hydra Mac I/O' CONFIG_I2C_HYDRA $CONFIG_I2C_ALGOBIT
+    tristate '  Intel 82801AA, 82801AB and 82801BA' CONFIG_I2C_I801
+    dep_tristate '  Intel i810AA, i810AB and i815' CONFIG_I2C_I810 $CONFIG_I2C_ALGOBIT
+    tristate '  Pseudo ISA adapter (for some hardware sensors)' CONFIG_I2C_ISA 
+    tristate '  Intel 82371AB PIIX4(E), ServerWorks OSB4/CSB5' CONFIG_I2C_PIIX4
+    tristate '  SiS 5595' CONFIG_I2C_SIS5595
+    dep_tristate '  DEC Tsunami I2C interface' CONFIG_I2C_TSUNAMI $CONFIG_I2C_ALGOBIT
+    dep_tristate '  VIA Technologies, Inc. VT82C586B' CONFIG_I2C_VIA $CONFIG_I2C_ALGOBIT
+    tristate '  VIA Technologies, Inc. VT596A/B' CONFIG_I2C_VIAPRO
+    dep_tristate '  Voodoo3 I2C interface' CONFIG_I2C_VOODOO3 $CONFIG_I2C_ALGOBIT
+  fi
+endmenu
+fi
+fi
+
drivers/i2c/busses/Makefile new file +27 -0
@@ -0,0 +1,27 @@
+#
+# Makefile for the kernel hardware sensors bus drivers.
+#
+
+MOD_LIST_NAME := SENSORS_BUS_MODULES
+
+export-objs	:= i2c-ali1535.o
+
+obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
+obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
+obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
+obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
+obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
+obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
+obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
+obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
+obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
+ifeq ($(MACHINE),alpha)
+  obj-$(CONFIG_I2C_TSUNAMI)	+= i2c-tsunami.o
+endif
+obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+
+
+include $(TOPDIR)/Rules.make
drivers/i2c/chips/Config.in new file +46 -0

46 lines not on this page · raw message

drivers/i2c/chips/Makefile new file +37 -0
@@ -0,0 +1,37 @@
+#
+# Makefile for the kernel hardware sensors chip drivers.
+#
+
+MOD_LIST_NAME := SENSORS_CHIPS_MODULES
+
+obj-$(CONFIG_SENSORS)		+= sensors.o
+obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
+obj-$(CONFIG_SENSORS_ADM1024)	+= adm1024.o
+obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
+obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
+obj-$(CONFIG_SENSORS_BT869)	+= bt869.o
+obj-$(CONFIG_SENSORS_DDCMON)	+= ddcmon.o
+obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
+obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
+obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
+obj-$(CONFIG_SENSORS_FSCSCY)	+= fscscy.o
+obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
+obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
+obj-$(CONFIG_SENSORS_ICSPLL)	+= icspll.o
+obj-$(CONFIG_SENSORS_IT87)	+= it87.o
+obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
+obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
+obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
+obj-$(CONFIG_SENSORS_LM87)	+= lm87.o
+obj-$(CONFIG_SENSORS_LTC1710)	+= ltc1710.o
+obj-$(CONFIG_SENSORS_MATORB)	+= matorb.o
+obj-$(CONFIG_SENSORS_MAXILIFE)	+= maxilife.o
+obj-$(CONFIG_SENSORS_MTP008)	+= mtp008.o
+obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
+obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
+obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
+obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
+obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
+
+include $(TOPDIR)/Rules.make