How to get rid of unused data in LKM
Hi,
I am writing a LKM that contains a huge constant array of data that is used as firmware for a PCI card that is connected to the system where the LKM is loaded.
The module_init function writes the constant data array into the PCI card's RAM and triggers a CPU on that card to jump to the firmware code. This works fine.
But after doing so, the firmware data is still wasting kernel memory on the host system and is not used anymore.
How can I free that memory ? Is there a better way to handle that data ? Currently I have a global variable in my module code:
unsigned char firmware[] = { ..., .... ,.... about 1.4 Meg, ...}
The firmware data (about 1.4 Meg) must be linked with the LKM.
Any idea ?
Matthias
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 6 lines · In message <[email protected]> you wrote:
I am writing a LKM that contains a huge constant array of data that is used as firmware for a PCI card that is connected to the system where the LKM is loaded.
The
module_initfunction writes the constant data array into the PCI card's RAM and triggers a CPU on that card to jump to the firmware code. This works fine.
Why don't you load the firmware using some ioctl() _after_ loading the module?
Quoted 3 lines
But after doing so, the firmware data is still wasting kernel memory on the host system and is not used anymore.
How can I free that memory ? Is there a better way to handle that data ?
If you really think you must link the data with the module: Declare it using "__initdata" ?
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] This is an unauthorized cybernetic announcement.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 7 lines
Quoted 4 lines
But after doing so, the firmware data is still wasting kernel memory on the host system and is not used anymore.
How can I free that memory ? Is there a better way to handle that data ?If you really think you must link the data with the module: Declare it using "
__initdata" ?
I was under the impression that data like this is not thrown away when compiled as a module... only when compiled directly into the kernel. Is this not true?
I think Wolfgang's ioctl idea is a much better way to go in this case.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/