Skip to contentSkip to conversation

PDC 20276 RAID support in 2.4.18

PATCH Steven Dake 3 participants 3 messages Jul 26, 2002 – Jul 27, 2002

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Arjan and others,

I have added support for the PDC 20276 used on Gigabyte GA-8IHXP (and possibly other motherboards) to the ATARAID feature of the linux 2.4.18 kernel. I have tested that the pdcraid.c code works with this device.

I suspect you can drive this patch into the mainline kernel, but if you know of a better person, please advise.

Thanks!
-steve

Binary files linux/arch/i386/boot/vmlinuz-pdc and linux-pdc20276/arch/i386/boot/vmlinuz-pdc differ

drivers/ide/ide-pci.c +2 -0
diff -uNr linux/drivers/ide/ide-pci.c linux-pdc20276/drivers/ide/ide-pci.c
@@ -47,6 +47,7 @@
 #define DEVID_PDC20267	((ide_pci_devid_t){PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20267})
 #define DEVID_PDC20268  ((ide_pci_devid_t){PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20268})
 #define DEVID_PDC20268R ((ide_pci_devid_t){PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20268R})
+#define DEVID_PDC20276	((ide_pci_devid_t){PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20276})
 #define DEVID_RZ1000	((ide_pci_devid_t){PCI_VENDOR_ID_PCTECH,  PCI_DEVICE_ID_PCTECH_RZ1000})
 #define DEVID_RZ1001	((ide_pci_devid_t){PCI_VENDOR_ID_PCTECH,  PCI_DEVICE_ID_PCTECH_RZ1001})
 #define DEVID_SAMURAI	((ide_pci_devid_t){PCI_VENDOR_ID_PCTECH,  PCI_DEVICE_ID_PCTECH_SAMURAI_IDE})
@@ -406,6 +407,7 @@
 	   prevent Linux detecting it and using our own raid code. We want to detect
 	   it for the ataraid drivers, so we have to list both here.. */
 	{DEVID_PDC20268R,"PDC20268",	PCI_PDC202XX,	ATA66_PDC202XX,	INIT_PDC202XX,	NULL,		{{0x00,0x00,0x00}, {0x00,0x00,0x00}},	OFF_BOARD,	16 },
+	{DEVID_PDC20276,"PDC20276",	PCI_PDC202XX,	ATA66_PDC202XX,	INIT_PDC202XX,	NULL,		{{0x00,0x00,0x00}, {0x00,0x00,0x00}},	OFF_BOARD,	16 },
 	{DEVID_RZ1000,	"RZ1000",	NULL,		NULL,		INIT_RZ1000,	NULL,		{{0x00,0x00,0x00}, {0x00,0x00,0x00}}, 	ON_BOARD,	0 },
 	{DEVID_RZ1001,	"RZ1001",	NULL,		NULL,		INIT_RZ1000,	NULL,		{{0x00,0x00,0x00}, {0x00,0x00,0x00}}, 	ON_BOARD,	0 },
 	{DEVID_SAMURAI,	"SAMURAI",	NULL,		NULL,		INIT_SAMURAI,	NULL,		{{0x00,0x00,0x00}, {0x00,0x00,0x00}},	ON_BOARD,	0 },
include/linux/pci_ids.h +1 -0
diff -uNr linux/include/linux/pci_ids.h linux-pdc20276/include/linux/pci_ids.h
@@ -606,6 +606,7 @@
 #define PCI_DEVICE_ID_PROMISE_20268R	0x6268
 #define PCI_DEVICE_ID_PROMISE_20269	0x4d69
 #define PCI_DEVICE_ID_PROMISE_20275	0x1275
+#define PCI_DEVICE_ID_PROMISE_20276	0x5275
 #define PCI_DEVICE_ID_PROMISE_5300	0x5300
 
 #define PCI_VENDOR_ID_N9		0x105d
#1 lore raw
Quoted 3 lines · Steven Dake

Arjan and others,

I have added support for the PDC 20276 used on Gigabyte GA-8IHXP (and possibly other motherboards) to the ATARAID feature of the linux 2.4.18 kernel. I have tested that the pdcraid.c code works with this device.

What's wrong with the PDC 20276 support in the 2.4.19preX and rc kernels?

Best regards,
Mads Bach

#2 lore raw
In reply to Steven Dake

hi ya steve

how was the system tested ???

-- my simple raid-compatibility test is:
( assuming raid1 or raid5 setup on ide disks )

- pull out /dev/hda
- see if it boots

- pull out /dev/hdc ( the other boot disk )
- see if it boots

- plug a virgin ( unformatted/unpartitioned disk ) into either /dev/hda or /dev/hdc
- see if it boots and resyncs itself

if the system doesnt boot or doesnt resync ( all by itself ) than i'd see its a problem and need more fixing... and tweeking

- i disable all onboard ( motherboard/firmware based raid )

have fun
alvin

the pdc 202xx series chips are great for sw raid5...
( inexpensive, functional and works in the promise/maxtor pci cards )

Quoted 12 lines · Steven Dake

Arjan and others,

I have added support for the PDC 20276 used on Gigabyte GA-8IHXP (and possibly other motherboards) to the ATARAID feature of the linux 2.4.18 kernel. I have tested that the pdcraid.c code works with this device.

I suspect you can drive this patch into the mainline kernel, but if you know of a better person, please advise.

Thanks!
-steve