Skip to contentSkip to conversation

How do I measue latency?

DISCUSSION Johnathan Hicks 2 participants 4 messages Aug 1, 2002 1 message not in the archive ACPI

lore
Share & tools
lore
#0 lore raw

ASUS was lazy when crafting the ACPI tables for my A7M266-D motherboard, and set the C2 and C3 latency values to 101 and 1001 respectivley to disable them. I know that ACPI doesn't do C2/C3 on SMP yet, but I would like to be be able to measure some real values to insert in the FADT(FACP?) for when it can be used. Both measuring and inserting into that table are possible right? As a side note, they goofed on the _S3_ object and wrote S_3_ instead in the DSDT.

--John

-------------------------------------------------------
This sf.net email is sponsored by: Dice - The leading online job board for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.com/seeker.epl?rel_code=31

#2 lore raw
In reply to a message not in the archive
Quoted 6 lines · Johnathan Hicks

ASUS was lazy when crafting the ACPI tables for my A7M266-D motherboard, and set the C2 and C3 latency values to 101 and 1001 respectivley to disable them. I know that ACPI doesn't do C2/C3 on SMP yet, but I would like to be be able to measure some real values to insert in the FADT(FACP?) for when it can be used. Both measuring and inserting into that table are possible right? As a side note, they goofed on the _S3_ object and wrote S_3_ instead in the DSDT.

The current -ac tree has a non ACPI power management module that works on this board, if that helps. Its not perfect but -ac6 will have the updated one

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw
In reply to a message not in the archive
Quoted 6 lines · Johnathan Hicks

ASUS was lazy when crafting the ACPI tables for my A7M266-D motherboard, and set the C2 and C3 latency values to 101 and 1001 respectivley to disable them. I know that ACPI doesn't do C2/C3 on SMP yet, but I would like to be be able to measure some real values to insert in the FADT(FACP?) for when it can be used. Both measuring and inserting into that table are possible right? As a side note, they goofed on the _S3_ object and wrote S_3_ instead in the DSDT.

Doh and I just realised of course that you also worked on that so you knew there was a native one - sorry

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw
Quoted 2 lines · Alan Cox

Doh and I just realised of course that you also worked on that so you knew there was a native one - sorry

No problem. :-)

--John

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf