Skip to contentSkip to conversation

new alsa docs.

DISCUSSION Patrick Shirkey 10 participants 17 messages Aug 5, 2002 – Aug 9, 2002

lore
Share & tools
lore
#0 lore raw

I'm have soreted out all the final bugs I had with the new docs setup. Added the midi stuff and I feel that the site is ready for prime time.

You can see it here:

http://www.alsa-project.org/alsa-doc/

I appreciate other people going through it but I will make some links to it from the main page tonight.

Thx.

Signature · 12 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#1 lore raw
Quoted 6 lines · Patrick Shirkey

I'm have soreted out all the final bugs I had with the new docs setup. Added the midi stuff and I feel that the site is ready for prime time. You can see it here:
http://www.alsa-project.org/alsa-doc/
I appreciate other people going through it but I will make some links to it from the main page tonight.

echo corporation is green now...

-Dan

Signature · 8 lines
[-] Omae no subete no kichi wa ore no mono da. [-]



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#6 lore raw
In reply to Patrick Shirkey
Quoted 6 lines · Patrick Shirkey

I'm have soreted out all the final bugs I had with the new docs setup. Added the midi stuff and I feel that the site is ready for prime time.

You can see it here:

http://www.alsa-project.org/alsa-doc/

Rad!

I hadn't been keeping up with the status of your work, Patrick, but it looks great. Nice job.

A few suggestions, quibbles, etc, meant to be constructive feedback:

* It wasn't obvious to me that the "plus" down at the bottom is a link to add information. Perhaps if it were a link or a button that said something like "Add comment to this card's page..." or something it would be more clear.

* I know you've got it templated, but I suppose that all of the common stuff on the card pages could maybe go on one separate page.

* Are there any programs that don't work with ~/.asoundrc files? I don't have one, personally. I just use the "default" device, as it suits my needs fine. I think that templated asoundrc isn't all that useful, but maybe that's just me.

* It would be nice if the link to the driver docs were a link instead of a button. A table full of buttons is rather imposing, at least to me. I think it takes longer to render, too.

Anyway, what you have looks good, keep up the good work. These are just suggestions, take them or leave them as you will.

regards,

wingo.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

author Applied
#2 lore raw
In reply to Dan Hollis
Quoted 3 lines · Dan Hollis

echo corporation is green now...

Applied.

Signature · 12 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#7 lore raw
In reply to Andy Wingo
Quoted 7 lines · Andy Wingo
Quoted 4 lines · Patrick Shirkey

I'm have soreted out all the final bugs I had with the new docs setup. Added the midi stuff and I feel that the site is ready for prime time.

You can see it here:

Quoted 8 lines
Quoted 1 line

http://www.alsa-project.org/alsa-doc/

Rad!

I hadn't been keeping up with the status of your work, Patrick, but it looks great. Nice job.

Thanks.

Quoted 7 lines

A few suggestions, quibbles, etc, meant to be constructive feedback:

* It wasn't obvious to me that the "plus" down at the bottom is a link to add information. Perhaps if it were a link or a button that said something like "Add comment to this card's page..." or something it would be more clear.

Ok. I stole it from the php site. I am trying to think of a new design that is funky. Probably a spin on the ALSA logo with ADD instead of ALSA.

Quoted 3 lines

* I know you've got it templated, but I suppose that all of the common stuff on the card pages could maybe go on one separate page.

We discussed this a while ago and the general consensus was that we wanted the page to be complete. I have tried to make a compromise between having the high level stuff easily accesible and not making it too scary for new users. The aim of the new setup is to provide a style of documentation which is similar to the way M$ does it. The sad truth is that is what the majority are used to so we want to make the transition easier for them.

I am open to other ways of presenting the material on the page.

Quoted 5 lines

* Are there any programs that don't work with ~/.asoundrc files? I don't have one, personally. I just use the "default" device, as it suits my needs fine. I think that templated asoundrc isn't all that useful, but maybe that's just me.

The .asoundrc is very simple for the main reason that we don't have working user docs for the .asoundrc file yet. I am working on it as are others. Watch this space. However the one in the template does work with
f.i ardour so that is useful for a lot of people.

Quoted 4 lines

* It would be nice if the link to the driver docs were a link instead of a button. A table full of buttons is rather imposing, at least to me. I think it takes longer to render, too.

I know but I haven't yet figured out how to make use a link as a submit button for a form which is the basis of the current design. Everything is posted around. I know there are better ways to do this but I don't know how to do them. So it will be form based until I or someone else can write a better version. Emphasis on write :)

Quoted 3 lines

Anyway, what you have looks good, keep up the good work. These are just suggestions, take them or leave them as you will.

I appreciate your feedback because it shows me which parts I need to work on.

Signature · 12 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#8 lore raw

On Tue, 06 Aug 2002 18:25:22 +0900
PS> > On Tue, 06 Aug 2002, Patrick Shirkey wrote:
PS> >
PS> >
PS> >>I'm have soreted out all the final bugs I had with the new docs PS> >setup. >Added the midi stuff and I feel that the site is ready for PS> >prime time.>
PS> >>You can see it here:
PS> >>
PS> >>http://www.alsa-project.org/alsa-doc/

Just a couple of minor queries.
1) In the "Setting up modprobe and kmod support" you do not include the line:
alias sound-service-0-8 snd-seq-oss
(at least for the two cards relevant to me [trident and ice1712] but you do
include it in the explanation. Which is recommended?

2) For debian it is possible to add a new file "alsasound" (say) to /etc/modutils/ and update-modules will find it (I'm not sure if this is recommended practice or not, I'm still very much a beginner with debian).

Overall though, a nice piece of work, that should be very useful in making ALSA more accessible to new users.

James

Signature · 11 lines
+------------------------+-------------------------------+---------+
| James Tappin           | School of Physics & Astronomy |  O__    |
| [email protected] | University of Birmingham      | --  \/` |
| Ph: 0121-414-6462. Fax: 0121-414-3722                  |         |
+--------------------------------------------------------+---------+


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#9 lore raw
Quoted 9 lines · James Tappin

On Tue, 06 Aug 2002 18:25:22 +0900
PS> > On Tue, 06 Aug 2002, Patrick Shirkey wrote:
PS> > PS> > PS> >>I'm have soreted out all the final bugs I had with the new docs PS> >setup. >Added the midi stuff and I feel that the site is ready for PS> >prime time.>
PS> >>You can see it here:
PS> >>
PS> >>http://www.alsa-project.org/alsa-doc/

Quoted 8 lines

Just a couple of minor queries.
1) In the "Setting up modprobe and kmod support" you do not include the line:
alias sound-service-0-8 snd-seq-oss
(at least for the two cards relevant to me [trident and ice1712] but you do
include it in the explanation. Which is recommended?

Hmmm, good question. I have added it for now as they are different minor numbers.

Quoted 5 lines

2) For debian it is possible to add a new file "alsasound" (say) to /etc/modutils/ and update-modules will find it (I'm not sure if this is recommended practice or not, I'm still very much a beginner with debian).

Ahh. So all files that configure modules in some way eg startup or modules.conf are dealt with by modutils? I'll read up and see if I can make the tip more precise.

Quoted 3 lines

Overall though, a nice piece of work, that should be very useful in making ALSA more accessible to new users.

Thanks.

Signature · 12 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#3 lore raw
In reply to Patrick Shirkey

Nice work Patrick! I've found a few things that can be improved (although I consider only the first point somewhat important)
1) for emu10k cards: add a section how to download the samples into the card
2) The buttons inside the table in the cards page look ugly (konqueror kde3)
3) Add missing ALT tags (and height and width, while you are at it, the latter can be done with imagesize from cpan).
4) Look at the pages with a text browser like links or w3m: the color for the soundcards is missing.

Ciao
Jörg

--
Joerg Mayer <[email protected]>
I found out that "pro" means "instead of" (as in proconsul). Now I know what proactive means.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#12 lore raw
In reply to James Tappin
Quoted 4 lines · James Tappin

2) For debian it is possible to add a new file "alsasound" (say) to /etc/modutils/ and update-modules will find it (I'm not sure if this is recommended practice or not, I'm still very much a beginner with debian).

For debian, you're best off installing the alsa libs, etc from packages, and building the modules from source. The alsa-base package provides modutils and sysvinit integration. See /etc/alsa/modutils/0.9 [*] for the modutils stuff.

[*] It might be 1.0 now. I have both files and they look the same. Hey Jaroslav, let's get a 1.0 ;-)

regards,

wingo.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw

Use less number of BDs in i810

In reply to Joerg Mayer

Hi all,
I suppose that present implementation of i810 driver uses 32 BDs. Can
u pls direct me how to reduce this number to say only 16 or 8 BDs.

Also, now if the number of frags I am getting is 8, size of each frag I am getting is 4456 bytes. I have two questions regarding this.

1. How can I force the fragment size to be abt 1k or 2k bytes?

2. Is it strange that this number is not a multiple of 512 bytes? ( I
am getting physize of 35648 bytes. not 32K ? )

Thanx in advance,
Shaju Abraham

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#5 lore raw

Re: Use less number of BDs in i810

At Wed, 07 Aug 2002 12:54:23 +0530,

Quoted 4 lines · Shaju Abraham

Hi all,
I suppose that present implementation of i810 driver uses
32 BDs.

no, it's maximal 32 BDs.
and, in the current code, a period (as the alsa's terminology) corresponds to a BD, i.e. maximal 32 periods.

Quoted 6 lines

Can u pls direct me how to reduce this number to say only 16 or 8 BDs.

Also, now if the number of frags I am getting is 8, size of each frag I am getting is 4456 bytes. I have two questions regarding this.

1. How can I force the fragment size to be abt 1k or 2k bytes?

via alsa-lib API. set the period size (or period time) explicitly.

Quoted 2 lines

2. Is it strange that this number is not a multiple of 512 bytes? ( I
am getting physize of 35648 bytes. not 32K ? )

in the current code it's ok. the size of each BD is arbitrary.

but if we use discontinuous kernel pages via scatter-gather mechanism, the period size must be aligned to the power of two. this is not implemented on intel8x0 driver yet, but once if it's there, the size will be restricted.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#13 lore raw
In reply to Andy Wingo

At Tue, 6 Aug 2002 12:24:47 -0400,

Quoted 8 lines · Andy Wingo
Quoted 4 lines · James Tappin

2) For debian it is possible to add a new file "alsasound" (say) to /etc/modutils/ and update-modules will find it (I'm not sure if this is recommended practice or not, I'm still very much a beginner with debian).

Quoted 7 lines

For debian, you're best off installing the alsa libs, etc from packages, and building the modules from source. The alsa-base package provides modutils and sysvinit integration. See /etc/alsa/modutils/0.9 [*] for the modutils stuff.

[*] It might be 1.0 now. I have both files and they look the same. Hey Jaroslav, let's get a 1.0 ;-)

at first we need a 0.9 without rc :)

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#10 lore raw
In reply to Patrick Shirkey

At Tue, 06 Aug 2002 20:12:02 +0900,

Quoted 10 lines · Patrick Shirkey
Quoted 9 lines

Just a couple of minor queries.
1) In the "Setting up modprobe and kmod support" you do not include the line:
alias sound-service-0-8 snd-seq-oss
(at least for the two cards relevant to me [trident and ice1712] but you do
include it in the explanation. Which is recommended?

Quoted 2 lines

Hmmm, good question. I have added it for now as they are different minor numbers.

another minor correction:

in the section 'A short explanation of what happens in the /etc/modules.conf file', there are two bogus configurations for the second card:
alias sound-service-1-1 snd-seq-oss
alias sound-service-1-8 snd-seq-oss

they are not necessary, because there is only one /dev/sequencer, regardless how many cards you have.

ciao,

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#14 lore raw
In reply to Patrick Shirkey

Am Montag, 5. August 2002 17:51 wurde geschrieben:

Quoted 9 lines

I'm have soreted out all the final bugs I had with the new docs setup. Added the midi stuff and I feel that the site is ready for prime time.

You can see it here:

http://www.alsa-project.org/alsa-doc/

I appreciate other people going through it but I will make some links to it from the main page tonight.

You might want to add Emagic's "EMI 2|6" to the matrix at least in green, though it works fully for me with the following:

-> using tapio laxströms firmware loader (yes, he signed a NDA...) from
http://www.vtoy.fi/~tapio/emi26.html to load the firmware

-> Then using the usb-audio-driver

-> .asoundrc:
==================

pcm.emi {
        type hw;
        card 0;
}
ctl.emi {
        type hw;
        card 0;
}

==================

-> modules.conf:
==================
alias char-major-116 snd
alias char-major-14 soundcore
# EMI 2|6
alias snd-card-0 snd-usb-audio
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-12 snd-pcm-oss
options snd-usb-audio snd_id="emi"
==================

Unfortunately there are a few system-hangups I experienced on my intel-box, but I suspect my setup isn't very clean any more... On my ppc it runs just fine ;-)

Have fun*

Niklas

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#15 lore raw

Hi,

Can I just take the opportunity to ask why, in the sound-card matrix, the Hoontech ST Audio DSP24 is in green as a 'possible' still, when the entry below it, the IC Ensemble Envy24 (the former being based on the latter) is supported with the ice1712 driver? Are there outstanding issues with regard to Hoontech-specific functions? I've just started playing with the former card (a Mk I version), and in fact am yet to obtain an external rack for it.

Regards,

Quoted 5 lines · Scott. On 2002.08.08 03:11 Niklas Werner wrote:

You might want to add Emagic's "EMI 2|6" to the matrix at least in green,
though it works fully for me with the following:

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#16 lore raw
Quoted 5 lines · Scott MacKenzie

Hi,

Can I just take the opportunity to ask why, in the sound-card matrix, the Hoontech ST Audio DSP24 is in green as a 'possible' still, when the entry below it, the IC Ensemble Envy24 (the former being based on the latter) is supported with the ice1712 driver? Are there outstanding issues with regard to Hoontech-specific functions? I've just started playing with the former card (a Mk I version), and in fact am yet to obtain an external rack for it.

Let us know how you get on and we will change the matrix accordingly.

Signature · 12 lines
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
#11 lore raw
In reply to Patrick Shirkey

hallo,

please add the turtle beach cards fiji & pinnacle as (supported as module, cvs) to the sound card matrix.

danke,
karsten

__________________________________________________________________

Gesendet von Yahoo! Mail - http://mail.yahoo.de
Möchten Sie mit einem Gruß antworten? http://grusskarten.yahoo.de

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf