SMP Kernel Problem
I received and error message telling me to send an email to this address. I'm using kernel 2.4.9-13 (ASPLinux) on a Dual P3 1Ghz and an ASUS CUV4X-D motherboard. The text around the error is as follows:
unexpected IO-APIC, please mail
to [email protected]
...........done.
Using local APIC timer interrupts.
calibrating APIC timer...
.....CPU clock speed is 1004.4802Mhz.
.....host bus clock speed is 133.9308Mhz.
cpu:0, clocks:1339308, slice 446436
cpu:0<T0: 1339296, T1: 274960, D: 171464, S: 446436, C: 1339308> cpu:1<T0: 1339296, T1: 274960, D: 171464, S: 446436, C: 1339308> checking TSC synchronization across CPUs: passed.
There is some other stuff and then it just stops and the screen goes blank. Then I start hearing beeps come from my motherboard telling me that one of the CPUs is over heating. I'm going to try upgrading my kernel to 2.4.19 and see if this fixes the error. If there's anything you would like me to do let me know.
Nic Wilson
Quoted 3 lines · Nic Wilson
I received and error message telling me to send an email to this address. I'm using kernel 2.4.9-13 (ASPLinux) on a Dual P3 1Ghz and an ASUS CUV4X-D motherboard. The text around the error is as follows:
That board will hang solid. Set the BIOS options to Intel MP1.1 not 1.4 and/or upgrade to a recent BIOS.
Quoted 3 lines
There is some other stuff and then it just stops and the screen goes blank. Then I start hearing beeps come from my motherboard telling me that one of the CPUs is over heating. I'm going to try upgrading my
We end up crashing with the CPU in a tight loop. That should not be causing an overheat unless there is also a problem with your cooling
Quoted 8 lines · Nic Wilson
There is some other stuff and then it just stops and the screen goes blank. Then I start hearing beeps come from my motherboard telling me that one of the CPUs is over heating. I'm going to try upgrading my kernel to 2.4.19 and see if this fixes the error. If there's anything you would like me to do let me know.
Nic Wilson
I had this problem on a Asus single 1Ghz cpu motherboard where it was saying that the CPU was overheating, in a situation where it couldn't possibly true( the computer was on for 2 minutes) I disabled temperature monitoring, set the cpu to a lower speed and got the thing up and going and used it for several months. The mother board (and I mean the motherboard) could not compile xwindows. It would build for a while and then eventually die with the most spectacular crash. (messages from the kernel about page faults and so on) I have two other machines, a slow cpu and a dual 2.2Ghz xeon P4 and they compile anything without problems. The part I liked best was the instructions to short a jumper to reset the cmos memory. Smoke came out. I look very closely at the board at it seems that they forgot to put a pullup between the power supply and the Jumper. I solve all the problems by replacing it by a non-asus motherboard.
Bruce