unable to start nfs daemon

Hi,

I have linux (kernel 2.4.18) running on my embedded board (StrongARM - SA1110 processor).

I am trying to mount a remote filesystem on the network from this board (i.e) I need this board to behave as a NFS client. I don't have an ethernet
connection to this board, but I have it in the network through a PPP connection
on the Serial port. (I am able to ping, telnet and ftp into other systems on the
network and vice-versa).

I had downloaded nfs-utils rpm for arm and I got it installed aswell. But when I try to start the nfs daemon (on the command line, by typing ./rpc.nfsd ), it fails
with the following complaint:

nfssvc: Function not impelmented.

could anyone tell me what I need to do? I've checked up with other mailing list archives
and it looks as though this was a problem with the 2.2.x kernel series......

1. My Kernel has been compiled with support for NFS (I can see an entry for nfs in /proc/filesystems)

2. Do I need to run a portmap daemon in addition to nfsd? (Sorry, I don't have rpcinfo for the arm target
and hence am unable to provide info on the daemons running)

Regards,
Kanagesh

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs