flash file system for production use
[forget CC to the list...]
Quoted 8 lines
hello...
there are 7 mtd partitions on the 32Mb NOR flash right now. (256k bootloader, 256k kernel parameters, 1M kernel1, 4M ramdisk1, 1M kernel2, 4M ramdisk2 and the rest (21.5M) goes to 1 jffs2 data partition. i want no flash- rootfs because of performance issues -- i think a ramdisk is always the fastest.
Quoted 6 lines
the reason behind the _very_big_ jffs2 partition is that i want to assure that the flash will never(?) fail because of weak blocks sometimes.
but thats also my fear -- i think the bigger the jffs partition the slower it gets after some time of use because of the effort of the wear leveling??? is this right???
I think it gets slower due to fragmentation. A JFFSx file system must scan at start up. A big fagmented partition will scan slower. I don't know enough about JFFSx, my main knowledge is about YAFFS which works on NAND.
Quoted 38 lines
so what i want to know is: is a smaller jffs2 partiton better from the performance view??? i will have no complex tree structure on the partition, only 2 directorys with some small files...
cheers Michael Palme
Quoted 30 lines · Charles Manning
Have you considered partitioning?
One partition for config files etc (stuff you need ASAP on boot). Another for verbose guff that you can mount at leasure.
-- Charles
Quoted 22 lines · you
hello...
i've got a strongarm system with 32mb intel strata flash. i need a mechanism for storing configuration files etc in the flashes. for this purpose 20mb of the flashes are free. the performance/ stability thing is very important for me. i cant wait 10 secs fot mounting/ checking etc. i' ve tried jffs2 from CVS and it seems to be "fast" on a nearly empty flash partition, but i have no suggestion about what happens in hard production use, when the flash will be written over and over again and the wear leveling takes place. the device is never shutdown'ed in a clean way -- always hard power off...
because i have 20megs free and only small information to store i think there is no need for a complex wear leveling mechanism but im not an expert.
what the best solution fot my problems???
please give some hints....
thanks in advance ... Michael Palme