Skip to contentSkip to conversation

Problem with alsa in 2.5.33 and xmms using oss emulation

DISCUSSION Jordan Breeding 2 participants 2 messages Sep 10, 2002 – Sep 13, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

I wrote in quite a while back and have tried talking to the xmms
developers about this but they insist that their must be a bug in my hardware or the driver I am using. My problem is that using alsa as the built in kernel sound driver for my SBLive! instead of the oss style sound driver I can not control the volume level through the mixer using xmms. The setup is as follows: build the alsa driver for emu10k1 directly into the kernel, enable oss emulation, use the oss output driver for xmms and enable "use volume instead of pcm". If I then try to use the arrow keys on my keyboard of the scroll wheel on my mouse the volume mixer will get stuck in the xmms window in certain ranges (usually no more than 15 units total). If I use my mount to drag the volume slider out of the range in question it will work again but will now be stuck in a new range. Alsa seems to work well with everything else I have that uses oss besides xmms. I do not know honestly which had the bug and which doesn't but they don't seem to care to much about listening to a bug report from me through email or over their message board. Maybe someone on this list knows of a fix, can fix it, or can make the xmms people listen? I sure hope so, thanks for the great sound drivers.

Jordan

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390

#1 lore raw

At Mon, 09 Sep 2002 21:33:31 -0500,

Quoted 14 lines · Jordan Breeding

Hello,

I wrote in quite a while back and have tried talking to the xmms
developers about this but they insist that their must be a bug in my hardware or the driver I am using. My problem is that using alsa as the built in kernel sound driver for my SBLive! instead of the oss style sound driver I can not control the volume level through the mixer using xmms. The setup is as follows: build the alsa driver for emu10k1 directly into the kernel, enable oss emulation, use the oss output driver for xmms and enable "use volume instead of pcm". If I then try to use the arrow keys on my keyboard of the scroll wheel on my mouse the volume mixer will get stuck in the xmms window in certain ranges (usually no more than 15 units total). If I use my mount to drag the

Quoted 8 lines

volume slider out of the range in question it will work again but will now be stuck in a new range. Alsa seems to work well with everything else I have that uses oss besides xmms. I do not know honestly which had the bug and which doesn't but they don't seem to care to much about listening to a bug report from me through email or over their message board. Maybe someone on this list knows of a fix, can fix it, or can make the xmms people listen? I sure hope so, thanks for the great sound drivers.

fixed on cvs. please update the driver.

this was due to the difference of mixer volume resolution.

master volume on sb live has only 5-bit resolution, i.e. from 0 to 31, while oss requires to convert it to the range from 0 to 100. since xmms closes the mixer device instantly after reading/writing and alsa driver resets the value at each time converted from the native value, the value was mismatched.
now the current value is kept persistently.

thanks,

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf