Possible bug in kernel 2.4.19 (fs/stat.c +ext3)
Possible bug in kernel 2.4.19 (fs/stat.c +ext3) ?
[1.] One line summary of the problem:
OOps in messages and after a few hours machine hangs
[2.] Full description of the problem/report:
The same oops appaers in messages, (machine work almost fine. Sometimes load level increases by 1, but this is not fully confirmed After a few hours!! the machine hangs. (might be independent problems??)
Nothing on the screen. Answers ping but no TCP. CROND is not writing log file any more.
[3.] Keywords (i.e., modules, networking, kernel):
ext3, raid, SMP
[4.] Kernel version (from /proc/version):
Linux version 2.4.19 (root@venus2) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 SMP Fri Aug 23 18:48:29 CEST 2002 [5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
Sep 12 16:51:26 mymachine sshd(pam_unix)[24817]: session opened for user root by (uid=0) Sep 12 16:51:27 mymachine kernel: <1>Unable to handle kernel paging request at virtual address 6c616ba0 Sep 12 16:51:27 mymachine kernel: printing eip: Sep 12 16:51:27 mymachine kernel: c013a800 Sep 12 16:51:27 mymachine kernel: *pde = 00000000 Sep 12 16:51:27 mymachine kernel: Oops: 0000 Sep 12 16:51:27 mymachine kernel: CPU: 0 Sep 12 16:51:27 mymachine kernel: EIP: 0010:[<c013a800>] Not tainted Sep 12 16:51:27 mymachine kernel: EFLAGS: 00010206 Sep 12 16:51:27 mymachine kernel: eax: 6c616b6c ebx: 00000000 ecx: e891c000 edx: d9b601a0 Sep 12 16:51:27 mymachine kernel: esi: d6c83fa4 edi: bfffba70 ebp: bfffaa08 esp: d6c83f9c Sep 12 16:51:27 mymachine kernel: ds: 0018 es: 0018 ss: 0018 Sep 12 16:51:27 mymachine kernel: Process rsync (pid: 24819, stackpage=d6c83000) Sep 12 16:51:27 mymachine kernel: Stack: d6c82000 bfffca80 d9b601a0 c1c1ef20 00001 000 d6c82000 083eb000 00000008 Sep 12 16:51:27 mymachine kernel: 00000001 c01088b3 bfffba70 bfffca80 42130 30c bfffca80 bfffba70 bfffaa08 Sep 12 16:51:27 mymachine kernel: 000000c4 c010002b 0000002b 000000c4 420d9 ff3 00000023 00000216 bfffaa00 Sep 12 16:51:27 mymachine kernel: Call Trace: [<c01088b3>] Sep 12 16:51:27 mymachine kernel: Sep 12 16:51:27 mymachine kernel: Code: 8b 40 34 85 c0 74 0a 52 ff d0 89 c3 83 c4 04 eb 02 31 db 85 Sep 12 16:51:27 mymachine sshd(pam_unix)[24817]: session closed for user
root
0xc013a7d0 <sys_lstat64>: sub $0x1c,%esp 0xc013a7d3 <sys_lstat64+3>: push %esi 0xc013a7d4 <sys_lstat64+4>: push %ebx 0xc013a7d5 <sys_lstat64+5>: mov 0x28(%esp,1),%eax 0xc013a7d9 <sys_lstat64+9>: lea 0x8(%esp,1),%esi 0xc013a7dd <sys_lstat64+13>: mov %esi,%ecx 0xc013a7df <sys_lstat64+15>: mov $0x8,%edx 0xc013a7e4 <sys_lstat64+20>: call 0xc013de6c <__user_walk> 352.sor 0xc013a7e9 <sys_lstat64+25>: mov %eax,%ebx 0xc013a7eb <sys_lstat64+27>: test %ebx,%ebx 0xc013a7ed <sys_lstat64+29>: jne 0xc013a837 <sys_lstat64+103> 353 ? sor 0xc013a7ef <sys_lstat64+31>: mov 0x8(%esp,1),%edx 0xc013a7f3 <sys_lstat64+35>: mov 0x8(%edx),%eax 0xc013a7f6 <sys_lstat64+38>: mov 0x90(%eax),%eax 0xc013a7fc <sys_lstat64+44>: test %eax,%eax 23.sor if( es elso fele) 0xc013a7fe <sys_lstat64+46>: je 0xc013a811 <sys_lstat64+65> 0xc013a800 <sys_lstat64+48>: mov 0x34(%eax),%eax 0xc013a803 <sys_lstat64+51>: test %eax,%eax 23.sor if( es 2. fele) 0xc013a805 <sys_lstat64+53>: je 0xc013a811 <sys_lstat64+65> 0xc013a807 <sys_lstat64+55>: push %edx 0xc013a808 <sys_lstat64+56>: call *%eax 24. sor (dentry) hvasa 0xc013a80a <sys_lstat64+58>: mov %eax,%ebx 0xc013a80c <sys_lstat64+60>: add $0x4,%esp 0xc013a80f <sys_lstat64+63>: jmp 0xc013a813 <sys_lstat64+67> 0xc013a811 <sys_lstat64+65>: xor %ebx,%ebx 0xc013a813 <sys_lstat64+67>: test %ebx,%ebx 355.sor 0xc013a815 <sys_lstat64+69>: jne 0xc013a82e <sys_lstat64+94> 0xc013a817 <sys_lstat64+71>: mov 0x2c(%esp,1),%eax 0xc013a81b <sys_lstat64+75>: push %eax 0xc013a81c <sys_lstat64+76>: mov 0xc(%esp,1),%eax 0xc013a820 <sys_lstat64+80>: mov 0x8(%eax),%eax 0xc013a823 <sys_lstat64+83>: push %eax 0xc013a824 <sys_lstat64+84>: call 0xc013a620 <cp_new_stat64> 356. sor 0xc013a829 <sys_lstat64+89>: mov %eax,%ebx 0xc013a82b <sys_lstat64+91>: add $0x8,%esp 0xc013a82e <sys_lstat64+94>: push %esi 0xc013a82f <sys_lstat64+95>: call 0xc013cd64 <path_release> 357 0xc013a834 <sys_lstat64+100>: add $0x4,%esp 0xc013a837 <sys_lstat64+103>: mov %ebx,%eax 0xc013a839 <sys_lstat64+105>: pop %ebx 0xc013a83a <sys_lstat64+106>: pop %esi 0xc013a83b <sys_lstat64+107>: add $0x1c,%esp 0xc013a83e <sys_lstat64+110>: ret 0xc013a83f <sys_lstat64+111>: nop
sys_lstat64:
subl $28,%esp
pushl %esi
pushl %ebx
movl 40(%esp),%eax
leal 8(%esp),%esi
movl %esi,%ecx
movl $8,%edx
call __user_walk
movl %eax,%ebx
testl %ebx,%ebx
jne .L1415
movl 8(%esp),%edx
movl 8(%edx),%eax
movl 144(%eax),%eax
testl %eax,%eax
je .L1416
movl 52(%eax),%eax
testl %eax,%eax
je .L1416
pushl %edx
call *%eax
movl %eax,%ebx
addl $4,%esp
jmp .L1417
.p2align 4,,7
.L1416:
xorl %ebx,%ebx
.L1417:
testl %ebx,%ebx
jne .L1418
movl 44(%esp),%eax
pushl %eax
movl 12(%esp),%eax
movl 8(%eax),%eax
pushl %eax
call cp_new_stat64
movl %eax,%ebx
addl $8,%esp
.L1418:
pushl %esi
call path_release
addl $4,%esp
.L1415:
movl %ebx,%eax
popl %ebx
popl %esi
addl $28,%esp
ret
.Lfe12:
.size sys_lstat64,.Lfe12-sys_lstat64
.align 4.globl sys_fstat64
.type sys_fstat64,@function
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here) The kernel I use was compiled on this system:
Linux venus2 2.2.20 #6 Wed Jul 10 19:44:23 CEST 2002 i686 unknown
Gnu C 2.95.2 Gnu make 3.79.1 binutils 2.9.5.0.37 util-linux util-linux Note: /usr/bin/fdformat is obsolete and is no longer available. util-linux Please use /usr/bin/superformat instead (make sure you have the util-linux fdutils package installed first). Also, there had been some util-linux major changes from version 4.x. Please refer to the documentation. util-linux mount 2.10f modutils 2.3.11 e2fsprogs 1.18 PPP 2.3.11 Linux C Library 2.1.3 ldd: version 1.9.11 Procps 2.0.6 Net-tools 1.54 Console-tools 0.2.3 Sh-utils 2.0
The kernel is running on this system:
Linux 2.4.19 #1 SMP Fri Aug 23 18:48:29 CEST 2002 i686 unknown
Gnu C 2.96 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.14 e2fsprogs 1.27 reiserfsprogs 3.x.0j Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.3.3 Sh-utils 2.0.11
Current filesystems: everything is ext3.
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 1
cpu MHz : 397.340
cache size : 512 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 792.98
processor : 1vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 1
cpu MHz : 397.340
cache size : 512 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 792.98
[7.3.] Module information (from /proc/modules):
No module support
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0c00-0c3f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
0cf8-0cff : PCI conf1
1000-100f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
1000-1007 : ide0
1008-100f : ide1
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1060-107f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
1060-107f : eepro100
1080-109f : Intel Corp. 82371AB/EB/MB PIIX4 USB
1400-14ff : LSI Logic / Symbios Logic (formerly NCR) 53c875
1400-147f : sym53c8xx
1800-18ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2)
1800-187f : sym53c8xx
00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cc7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-00245b23 : Kernel code
00245b24-0029c73f : Kernel data
3fff0000-3fffefff : ACPI Tables
3ffff000-3fffffff : ACPI Non-volatile Storage
fa000000-fa0fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] fa100000-fa100fff : LSI Logic / Symbios Logic (formerly NCR) 53c875 fa101000-fa101fff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2) fa102000-fa102fff : Cirrus Logic GD 5480
fa103000-fa1030ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 fa103400-fa1034ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2) fa104000-fa104fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
fa104000-fa104fff : eepro100
fa400000-fa7fffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) fc000000-fdffffff : Cirrus Logic GD 5480
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fff00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: ATLAS10K2-TY367J Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: IC35L018UCD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: IBM Model: IC35L018UCD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors
md5 : active raid1 hdc3[1] hda3[0]
39945920 blocks [2/2] [UU]
md1 : active raid1 sdc1[1] sda1[0]
32000 blocks [2/2] [UU]
md0 : active raid1 sdc2[1] sdb1[0]
32000 blocks [2/2] [UU]
md3 : active raid1 sdc6[1] sda5[0]
8578560 blocks [2/2] [UU]
md4 : active raid1 sdc7[1] sdb5[0]
8578560 blocks [2/2] [UU]
unused devices: <none>
[X.] Other notes, patches, fixes, workarounds:
Similare hangs were produced using the current reiserfs. Than resiserfs were removed from the filesystem and replaced by ext3.
The user space program rsync was compiled on a different system
The machine is originally Redhat 7.3 but the kernel was upgraded The original kernel was so unstablem could not compile even the kernel(!)). Also some user-space programs were recompiled.
Sorry, I left this out from the previois e-mail:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at fa400000 (32-bit, prefetchable) [size=4M]00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 37)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1400 [size=256]
Region 1: Memory at fa103000 (32-bit, non-prefetchable)
[size=256]
Region 2: Memory at fa100000 (32-bit, non-prefetchable)[size=4K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 37)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin B routed to IRQ 7
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at fa103400 (32-bit, non-prefetchable)
[size=256]
Region 2: Memory at fa101000 (32-bit, non-prefetchable)[size=4K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corp. 82558 10/100 with Wake on LAN
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fa104000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at 1060 [size=32]
Region 2: Memory at fa000000 (32-bit, non-prefetchable)[size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
00:12.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:12.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1000 [size=16]00:12.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 7
Region 4: I/O ports at 1080 [size=32]00:12.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:14.0 VGA compatible controller: Cirrus Logic GD 5480 (rev 23) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 4948
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 2500ns max)
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at fa102000 (32-bit, non-prefetchable)[size=4K]
Expansion ROM at <unassigned> [disabled] [size=32K]
Quoted 341 lines · Levay Akos
------------------------------------------------------------------------
Possible bug in kernel 2.4.19 (fs/stat.c+ext3) ?[1.] One line summary of the problem:
OOps in messages and after a few hours machine hangs[2.] Full description of the problem/report:
The same oops appaers in messages, (machine work almost fine. Sometimes load level increases by 1, but this is not fully confirmed After a few hours!! the machine hangs. (might be independent problems??)
Nothing on the screen. Answers ping but no TCP. CROND is not writing log file any more.
[3.] Keywords (i.e., modules, networking, kernel):
ext3, raid, SMP
[4.] Kernel version (from/proc/version):
Linux version 2.4.19 (root@venus2) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 SMP Fri Aug 23 18:48:29 CEST 2002 [5.] Output of Oops.. message (if applicable) with symbolic information
resolved (seeDocumentation/oops-tracing.txt)Sep 12 16:51:26 mymachine sshd(pam_unix)[24817]: session opened for user root by (uid=0) Sep 12 16:51:27 mymachine kernel: <1>Unable to handle kernel paging request at virtual address 6c616ba0 Sep 12 16:51:27 mymachine kernel: printing eip: Sep 12 16:51:27 mymachine kernel: c013a800 Sep 12 16:51:27 mymachine kernel: *pde = 00000000 Sep 12 16:51:27 mymachine kernel: Oops: 0000 Sep 12 16:51:27 mymachine kernel: CPU: 0 Sep 12 16:51:27 mymachine kernel: EIP: 0010:[<c013a800>] Not tainted Sep 12 16:51:27 mymachine kernel: EFLAGS: 00010206 Sep 12 16:51:27 mymachine kernel: eax: 6c616b6c ebx: 00000000 ecx: e891c000 edx: d9b601a0 Sep 12 16:51:27 mymachine kernel: esi: d6c83fa4 edi: bfffba70 ebp: bfffaa08 esp: d6c83f9c Sep 12 16:51:27 mymachine kernel: ds: 0018 es: 0018 ss: 0018 Sep 12 16:51:27 mymachine kernel: Process rsync (pid: 24819, stackpage=d6c83000) Sep 12 16:51:27 mymachine kernel: Stack: d6c82000 bfffca80 d9b601a0 c1c1ef20 00001 000 d6c82000 083eb000 00000008 Sep 12 16:51:27 mymachine kernel: 00000001 c01088b3 bfffba70 bfffca80 42130 30c bfffca80 bfffba70 bfffaa08 Sep 12 16:51:27 mymachine kernel: 000000c4 c010002b 0000002b 000000c4 420d9 ff3 00000023 00000216 bfffaa00 Sep 12 16:51:27 mymachine kernel: Call Trace: [<c01088b3>] Sep 12 16:51:27 mymachine kernel: Sep 12 16:51:27 mymachine kernel: Code: 8b 40 34 85 c0 74 0a 52 ff d0 89 c3 83 c4 04 eb 02 31 db 85 Sep 12 16:51:27 mymachine sshd(pam_unix)[24817]: session closed for userroot
0xc013a7d0 <sys_lstat64>: sub $0x1c,%esp 0xc013a7d3 <sys_lstat64+3>: push %esi 0xc013a7d4 <sys_lstat64+4>: push %ebx 0xc013a7d5 <sys_lstat64+5>: mov 0x28(%esp,1),%eax 0xc013a7d9 <sys_lstat64+9>: lea 0x8(%esp,1),%esi 0xc013a7dd <sys_lstat64+13>: mov %esi,%ecx 0xc013a7df <sys_lstat64+15>: mov $0x8,%edx 0xc013a7e4 <sys_lstat64+20>: call 0xc013de6c <__user_walk> 352.sor 0xc013a7e9 <sys_lstat64+25>: mov %eax,%ebx 0xc013a7eb <sys_lstat64+27>: test %ebx,%ebx 0xc013a7ed <sys_lstat64+29>: jne 0xc013a837 <sys_lstat64+103> 353 ? sor 0xc013a7ef <sys_lstat64+31>: mov 0x8(%esp,1),%edx 0xc013a7f3 <sys_lstat64+35>: mov 0x8(%edx),%eax 0xc013a7f6 <sys_lstat64+38>: mov 0x90(%eax),%eax 0xc013a7fc <sys_lstat64+44>: test %eax,%eax 23.sor if( es elso fele) 0xc013a7fe <sys_lstat64+46>: je 0xc013a811 <sys_lstat64+65> 0xc013a800 <sys_lstat64+48>: mov 0x34(%eax),%eax 0xc013a803 <sys_lstat64+51>: test %eax,%eax 23.sor if( es 2. fele) 0xc013a805 <sys_lstat64+53>: je 0xc013a811 <sys_lstat64+65> 0xc013a807 <sys_lstat64+55>: push %edx 0xc013a808 <sys_lstat64+56>: call *%eax 24. sor (dentry) hvasa 0xc013a80a <sys_lstat64+58>: mov %eax,%ebx 0xc013a80c <sys_lstat64+60>: add $0x4,%esp 0xc013a80f <sys_lstat64+63>: jmp 0xc013a813 <sys_lstat64+67> 0xc013a811 <sys_lstat64+65>: xor %ebx,%ebx 0xc013a813 <sys_lstat64+67>: test %ebx,%ebx 355.sor 0xc013a815 <sys_lstat64+69>: jne 0xc013a82e <sys_lstat64+94> 0xc013a817 <sys_lstat64+71>: mov 0x2c(%esp,1),%eax 0xc013a81b <sys_lstat64+75>: push %eax 0xc013a81c <sys_lstat64+76>: mov 0xc(%esp,1),%eax 0xc013a820 <sys_lstat64+80>: mov 0x8(%eax),%eax 0xc013a823 <sys_lstat64+83>: push %eax 0xc013a824 <sys_lstat64+84>: call 0xc013a620 <cp_new_stat64> 356. sor 0xc013a829 <sys_lstat64+89>: mov %eax,%ebx 0xc013a82b <sys_lstat64+91>: add $0x8,%esp 0xc013a82e <sys_lstat64+94>: push %esi 0xc013a82f <sys_lstat64+95>: call 0xc013cd64 <path_release> 357 0xc013a834 <sys_lstat64+100>: add $0x4,%esp 0xc013a837 <sys_lstat64+103>: mov %ebx,%eax 0xc013a839 <sys_lstat64+105>: pop %ebx 0xc013a83a <sys_lstat64+106>: pop %esi 0xc013a83b <sys_lstat64+107>: add $0x1c,%esp 0xc013a83e <sys_lstat64+110>: ret 0xc013a83f <sys_lstat64+111>: nop
sys_lstat64:subl $28,%esp pushl %esi pushl %ebx movl 40(%esp),%eax leal 8(%esp),%esi movl %esi,%ecx movl $8,%edx call __user_walk movl %eax,%ebx testl %ebx,%ebx jne .L1415 movl 8(%esp),%edx movl 8(%edx),%eax movl 144(%eax),%eax testl %eax,%eax je .L1416 movl 52(%eax),%eax testl %eax,%eax je .L1416 pushl %edx call *%eax movl %eax,%ebx addl $4,%esp jmp .L1417 .p2align 4,,7 .L1416: xorl %ebx,%ebx .L1417: testl %ebx,%ebx jne .L1418 movl 44(%esp),%eax pushl %eax movl 12(%esp),%eax movl 8(%eax),%eax pushl %eax call cp_new_stat64 movl %eax,%ebx addl $8,%esp .L1418: pushl %esi call path_release addl $4,%esp .L1415: movl %ebx,%eax popl %ebx popl %esi addl $28,%esp ret .Lfe12: .size sys_lstat64,.Lfe12-sys_lstat64 .align 4.globl
sys_fstat64
.type sys_fstat64,@function[7.] Environment
[7.1.] Software (add the output of thever_linuxscript here) The kernel I use was compiled on this system:Linux venus2 2.2.20 #6 Wed Jul 10 19:44:23 CEST 2002 i686 unknown
Gnu C 2.95.2 Gnu make 3.79.1 binutils 2.9.5.0.37 util-linux util-linux Note: /usr/bin/fdformat is obsolete and is no longer available. util-linux Please use /usr/bin/superformat instead (make sure you have the util-linux fdutils package installed first). Also, there had been some util-linux major changes from version 4.x. Please refer to the documentation. util-linux mount 2.10f modutils 2.3.11 e2fsprogs 1.18 PPP 2.3.11 Linux C Library 2.1.3 ldd: version 1.9.11 Procps 2.0.6 Net-tools 1.54 Console-tools 0.2.3 Sh-utils 2.0The kernel is running on this system:
Linux 2.4.19 #1 SMP Fri Aug 23 18:48:29 CEST 2002 i686 unknown
Gnu C 2.96 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.14 e2fsprogs 1.27 reiserfsprogs 3.x.0j Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.3.3 Sh-utils 2.0.11Current filesystems: everything is ext3.
[7.2.] Processor information (from
/proc/cpuinfo):
processor : 0vendor_id: GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 1
cpu MHz : 397.340
cache size : 512 KBfdiv_bug: nohlt_bug: nof00f_bug: nocoma_bug: no
fpu : yesfpu_exception: yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 792.98processor : 1
vendor_id: GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 1
cpu MHz : 397.340
cache size : 512 KBfdiv_bug: nohlt_bug: nof00f_bug: nocoma_bug: no
fpu : yesfpu_exception: yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr
bogomips : 792.98[7.3.] Module information (from
/proc/modules):
No module support[7.4.] Loaded driver and hardware information (
/proc/ioports,/proc/iomem) 0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0c00-0c3f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
0cf8-0cff : PCI conf1
1000-100f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
1000-1007 : ide0
1008-100f : ide1
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1060-107f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
1060-107f : eepro100
1080-109f : Intel Corp. 82371AB/EB/MB PIIX4 USB
1400-14ff : LSI Logic / Symbios Logic (formerly NCR) 53c875
1400-147f : sym53c8xx
1800-18ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2)
1800-187f : sym53c8xx00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cc7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-00245b23 : Kernel code
00245b24-0029c73f : Kernel data
3fff0000-3fffefff : ACPI Tables
3ffff000-3fffffff : ACPI Non-volatile Storage
fa000000-fa0fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] fa100000-fa100fff : LSI Logic / Symbios Logic (formerly NCR) 53c875 fa101000-fa101fff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2) fa102000-fa102fff : Cirrus Logic GD 5480
fa103000-fa1030ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 fa103400-fa1034ff : LSI Logic / Symbios Logic (formerly NCR) 53c875 (#2) fa104000-fa104fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
fa104000-fa104fff : eepro100
fa400000-fa7fffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) fc000000-fdffffff : Cirrus Logic GD 5480
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fff00000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
[7.6.] SCSI information (from/proc/scsi/scsi)
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: ATLAS10K2-TY367J Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: IBM Model: IC35L018UCD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: IBM Model: IC35L018UCD210-0 Rev: S5BS
Type: Direct-Access ANSI SCSI revision: 03[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you think to be relevant):
Personalities : [linear] [raid0] [raid1] [raid5]read_ahead1024 sectors
md5 : active raid1 hdc3[1] hda3[0]39945920 blocks [2/2] [UU]md1 : active raid1 sdc1[1] sda1[0]
32000 blocks [2/2] [UU]md0 : active raid1 sdc2[1] sdb1[0]
32000 blocks [2/2] [UU]md3 : active raid1 sdc6[1] sda5[0]
8578560 blocks [2/2] [UU]md4 : active raid1 sdc7[1] sdb5[0]
8578560 blocks [2/2] [UU]unused devices: <none>
[X.] Other notes, patches, fixes, workarounds:
Similare hangs were produced using the current reiserfs. Than resiserfs were removed from the filesystem and replaced by ext3.The user space program rsync was compiled on a different system
The machine is originally Redhat 7.3 but the kernel was upgraded The original kernel was so unstablem could not compile even the kernel(!)). Also some user-space programs were recompiled.