Skip to contentSkip to conversation

2.4.20-pre7 USB 2.0 "ehci-hcd" patches

DISCUSSION David Brownell 1 participant 1 message Sep 13, 2002

lore
Share & tools
lore
#0 lore raw

I thought I'd send the note here as well as to the Linux-USB list. Either because I thought the exposure to more folk that may have shiny new hardware could be useful, or because I'm a glutton for punishment ... I'm not sure yet.

The two patches are archived, such as

http://marc.theaimsgroup.com/?l=linux-usb-devel&m=103195770819572&w=2
http://marc.theaimsgroup.com/?l=linux-usb-devel&m=103195884620392&w=2

I won't see LKML followups unless you cc me, but I'll see posts on the USB developer's list.

- Dave

-------- Original Message --------
Subject: [linux-usb-devel] [PATCH 2.4.20-pre7 0 of 2] EHCI updates
Date: Fri, 13 Sep 2002 15:51:11 -0700
From: David Brownell <[email protected]>
To: [email protected]

I'm sending a couple of EHCI related patches out for folk who'd like to try this on top of 2.4.20-pre7.

I'd like to see if anyone has any feedback about it before taking the next steps to get it into 2.4.20 ... there are improvements, but likely some problems could still stand to get fixed.

If you're using EHCI hardware, please try the patches. Especially if:

- You've had problems before; CardBus should work, and there were a bunch of bugfixes too.

- You're not using a NEC host controller: Intel (ICH4), VIA (VT6202, VT8235), SIS (962, 963), NForce2, and so on. If you have a newish motherboard, it may well have USB 2.0 built in.

- You want to use USB 1.1 interrupt transactions through USB 2.0 hubs, such as for many HID devices, some Ethernet adapters, some disks, and so on.

The first patch does some minor updates to usbcore, which happens to break the current 2.4.20-pre7 ehci-hcd code.

The second patch brings ehci-hcd up to the 2.5.34bk4 level, and relies on that first patch.

- Dave