Skip to contentSkip to conversation

RAM disk image with offset after kernel

DISCUSSION Martin Kreiner 1 participant 1 message Sep 17, 2002

lore
Share & tools
lore
#0 lore raw

hi,

i'am currently working on a thin-client solution for IBM's 2x00.
with modified bios they are able to load an uncompressed kernel. i would like to append a RAM disk image as described in ../Documentation/ramdisk.txt but rdev can't handle this magic any more?:

---snip

./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK     0x07FF
./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000

...

The usage of the word (two bytes) that "rdev -r" sets in the kernel image has changed. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit 14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a prompt/wait sequence is to be given before trying to read the RAM disk.

...

Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would have 2^15 + 2^14 + 400 = 49552.

       rdev /dev/fd0 /dev/fd0
       rdev -r /dev/fd0 49552

--snap

so i tried :

dd if=my_ramdisk_image of=vmlinux bs=1k seek=my_kernel_size+some_space

and changed in ../arch/i386/kernel/setup.c:

- char c = ' ', *to = command_line, *from = COMMAND_LINE
+ char c = ' ', *to = command_line, *from = strcat(COMMAND_LINE , " ramdisk_start=my_kernel_size+some_space");

but in ../init/do_mount.c:

if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)

failed, so at boot i get:

RAMDISK: Couldn't find valid RAM disk image starting at my_kernel_size+some_space

what's wrong? Superblock?

TIA,

martin kreiner