Skip to contentSkip to conversation

APIC error on CPU0: 00(02)

DISCUSSION Ben Greear 1 participant 1 message Sep 29, 2002

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

Kernel: 2.4.20-pre8

Machine: dual 1.66Ghz AMD machine, Tyan motherboard 64/66 PCI,
2 Intel PRO/1000 MT nics,
1 DFE-570tx 4-port tulip based NIC.
2 built-in 3-com NICs.

I was running 20Mbps over each of the 4 tulip 100Mbps ports, and nothing over the gigE ports... Things ran fine, but I occasionally saw messages like this:

[root@localhost lanforge]# eth7: (19541091) System Error occured (2)
eth7: (19547299) System Error occured (2)
eth6: (19163408) System Error occured (2)
[root@localhost lanforge]# eth6: (19167052) System Error occured (2)

[root@localhost lanforge]# eth6: (19171414) System Error occured (2)
eth7: (19560749) System Error occured (2)
eth6: (19187463) System Error occured (2)

I mounted another machine across NFS using one of the 3-com ports, and started this command: tar -xvzf /mnt/blah/kernel.foo.tgz

At this point, the machine starts behaving extremely slowly, but after a few fits and bursts, it finishes and I can get a response at the prompt again.

I see more messages similar to those above, and I also see these errors:

[root@localhost lanforge]# eth6: (19773823) System Error occured (2) APIC error on CPU0: 00(02)
APIC error on CPU1: 00(02)

If anyone has any ideas, or can suggest more debugging information I can gather to make the problem easier to solve, please let me know!

Thanks,
Ben

Signature · 3 lines
Ben Greear <[email protected]>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear