u-boot compilation
Hello,
i?ve problems compiling u-boot. I use cross compiler 2.95.3. When i compile u-boot i get an errer that he cant finde a file called "mach-types.h". What could it be? How can i fix this problems? I haven?t found the file in my filesystem.. not in the kernel directory (2.4.18 and 2.5.0) and not in the directory of the cross compiler!
Andr?
Quoted 5 lines · Andr? Stierenberg
i?ve problems compiling u-boot. I use cross compiler 2.95.3. When i compile u-boot i get an errer that he cant finde a file called "
mach-types.h". What could it be? How can i fix this problems? I haven?t found the file in my filesystem.. not in the kernel directory (2.4.18 and 2.5.0) and not in the directory of the cross compiler!
mach-types.h should be in the include/asm-arm/ directory of your kernel tree. Are you sure you have installed a correct toolchain and kernel source?
Robert
Signature · 8 lines
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Braunschweiger Str. 79, 31134 Hildesheim, Germany
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4
Visit us at the SPS/IPC/Drives 2002 in Nuernberg!
Hall 5, Booth 154 +++ Please contact us for details.Quoted 10 lines · In message <[email protected]> you wrote:
Quoted 6 lines
i?ve problems compiling u-boot. I use cross compiler 2.95.3. When i compile u-boot i get an errer that he cant finde a file called "
mach-types.h". What could it be? How can i fix this problems? I haven?t found the file in my filesystem.. not in the kernel directory (2.4.18 and 2.5.0) and not in the directory of the cross compiler!
mach-types.hshould be in theinclude/asm-arm/directory of your kernel tree. Are you sure you have installed a correct toolchain and kernel source?
No. No file "mach-types.h" is needed anywhere in the U-Boot source code. If the compiler thinks it needs it (and cannot find it), then the cross compiler is misconfigured.
Get a working set of tools.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de See us @ electronica 2002 in Munich, Nov 12-15, Hall A3, Booth A3.325
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 1 line · Andr? Stierenberg
What erne and toolchain version are you using?
2.95.3. It seems like you are doing something substancially wrong - can you tell us what you did?
Robert
Signature · 8 lines
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Braunschweiger Str. 79, 31134 Hildesheim, Germany
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4
Visit us at the SPS/IPC/Drives 2002 in Nuernberg!
Hall 5, Booth 154 +++ Please contact us for details.A message that is not in the archive (sent off-list or not yet received): [email protected]
Andre,
Please include the list in your replies.
Quoted 2 lines · Andr? Stierenberg
i have used the toolchain 2.95.3 from www.arm.linux.org.uk. I have installed in in
/usr/local/armlike discribed in the README file..
My impression when I looked at this toolchain for the last time was that it is only a stage 1 toolchain - at least this is what the build script generates.
Quoted 3 lines
then i did a make
lubbock_configand make all i n the u-boot direkctory. At some point there comes a errer message that the filemach-types.his missing what is needed byhardware.hin the toolchain.
Could you cut-and-paste the error message plus some context? It's a little bit difficult to find out what happens if you don't give us more information.
Robert
Signature · 8 lines
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Braunschweiger Str. 79, 31134 Hildesheim, Germany
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Phone: +49-5121-28619-0 | Fax: +49-5121-28619-4
Visit us at the SPS/IPC/Drives 2002 in Nuernberg!
Hall 5, Booth 154 +++ Please contact us for details.Quoted 7 lines · Andr? Stierenberg
Quoted 2 lines
i have used the toolchain 2.95.3 from www.arm.linux.org.uk. I have installed in in
/usr/local/armlike discribed in the README file..My impression when I looked at this toolchain for the last time was that it is only a stage 1 toolchain - at least this is what the build script generates.
Not sure what you've meant, but I'm using the 2.95.3 from www.arm.linux.org.uk to compile armboot, now with my u-boot tries. I used it with Linux up to 2.4.17, now I'm using 3.2 (from the same location). It does NOT work with redboot.
One thing that one has to do with this 2.95.3 right is the installation location. It has to be /usr/local/arm/2.95.3 so that your PATH is /usr/local/arm/2.95.3/bin:$PATH
Signature · 5 lines
MN-Logistik GmbH http://www.mn-logistik.de Holger Schurig Dieselstr. 18 61191 Rosbach v.d.H?he Tel: 06003/9141-0 Fax: 06003/9141-49