Skip to contentSkip to conversation

Problem with USB]

DISCUSSION Gustavo Puche Rodríguez 2 participants 2 messages Nov 17, 2002

lore
Share & tools
lore
#0 lore raw

I have a 2.4.18 kernel and a motherboar EliteGroup K76SA, in the
boot messages apear a failure with the USB. This failure can be seen below:

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe08b7000, IRQ 9 usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 1 usb-ohci.c: USB OHCI at membase 0xe08b9000, IRQ 5 usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 2 usb.c: registered new driver usblp
usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110) usb_control/bulk_msg: timeout
usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)

Can anybody tell me if there is a fix of the BIOS or same other help?

ThanKs!!!

Gus.

#1 lore raw
Quoted 4 lines · Gustavo Puche Rodríguez

I have a 2.4.18 kernel and a motherboar EliteGroup K76SA, in the
boot messages apear a failure with the USB. This failure can be seen below:

Please see the FAQ at http://www.linux-usb.org/ for more info on this problem (in short, it's a interrupt routing problem, not a USB one.)

thanks,

greg k-h