bandwidth
Hi,
There are a couple of situations where I need to limit bandwidth on some of my machines. Can anyone share some solutions they have used? Here are a couple of examples of what I am trying to accomplish:
* Limit bandwidth to certain ftp sites from localhost.
* Establish a maximum bandwidth for any connection transiting the firewall/router.
Thanks.
Andy
Quoted 3 lines
There are a couple of situations where I need to limit bandwidth on some of my machines. Can anyone share some solutions they have used? Here are a couple of examples of
HTB with iproute2 tc utility.
http://luxik.cdi.cz/~devik/qos/htb/
Works just fine, easy to configure.
Rob
Quoted 4 lines · Rob Sterenborg
Quoted 3 lines
There are a couple of situations where I need to limit bandwidth on some of my machines. Can anyone share some solutions they have used? Here are a couple of examples of
Quoted 12 lines
HTB with iproute2 tc utility.
http://luxik.cdi.cz/~devik/qos/htb/Works just fine, easy to configure.
Rob
You can use iptables USER SPACE with SHAPERED.
http://webs.sinectis.com.ar/lesanti/shaperd.
Bye.
G.
2 internet link problem (forwarding help i think?)
Hi things i have to clear first!
DEFAULT GATEWAY = 203.100.100.1
MACHINE's (primary) IP = 203.100.100.2 - NIC1
MACHINE's (secondary) IP = 203.100.100.3 - NIC2
MASQ BLOCK = 10.0.0.0/16 - NIC3
I have 3 NIC Cards, My only problem is i want to route all my MASQ BLOCK that when they
access IP BLOCK 203.100.200.0/24 they will come out on NIC2 (Secondary IP of my machine)
And all other packets to its default route.
Is this possible? Im currently mixed up also when i tried to add the route on linux when i ping
that ip, the secondary IP will not work anymore but my default route to NIC1 will be still the same.
Its like this, I can access 203.100.100.3 (Im not yet adding my secondary ip/route) When i add
my secondary ip/route 203.100.100.3 "ifconfig eth2 203.100.100.3 netmask 255.255.255.240 up"
I can no longer access 203.100.100.3 But all of my other connections are working except for that.
my kernel routing table after adding.. (not real ip's)
panic:/# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 203.100.100.* 0.0.0.0 255.255.255.248 U 0 0 0 eth0 203.100.100.* 0.0.0.0 255.255.255.240 U 0 0 0 eth2 10.0.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 203.100.100.1 0.0.0.0 UG 0 0 0 eth0
Hope someone can help!
--
thanks,
louie miranda
--
thanks,
louie miranda