Compiling ucd-snmp using ELDK for PPC

Hi,

Anybody succeeded in compiling ucd-snmp.4.2.6 using ELDK? Could you please share
your option run with configure?

I have compiled one, but only can snmpget/snmpwalk/etc, but can not snmpset, it always
returns timeout.

Thanks

Jin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Presumably you have looked in /var/log/snmpd.log , to see what it is
telling you about the problem.

Chances are that your access control is not right. Have you tried
everything in the FAQs on http://www.net-snmp.org/ ??

You might like to try the mailing list (ucd-snmp was renamed net-snmp
some time ago):

List-Id:             General discussion forum for net-snmp users
List-Subscribe:      [email protected]

subject=subscribe
List-Post: [email protected]

Searchable Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=4959

The archive will give you plenty of things to check. That list will
be better equipped to advise.

Regards,
Erik

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/