[2.5.53] So sloowwwww......
Quoted 10 lines
Quoted 5 lines
Quoted 4 lines
From the .config, it looks like you have a P4. I'm not
seeing that regression on K6/2 or P3 Xeon.
That's correct, I have a P4. Maybe something related to the CPU, but I hardly see what it can be...
I'd guess power management, a runaway interrupt, bad mtrr settings, problems with the memory map decoding or Hyperthreading.
Check/proc/interrupts/proc/mtrr
The memory detection results at the top of dmesg
disable apm, acpi.
Check anything Hyperthreading related in dmesg.
Quoted 9 lines
I'd guess power management, a runaway interrupt, bad mtrr settings, problems with the memory map decoding or Hyperthreading.
Check
/proc/interrupts/proc/mtrr
The memory detection results at the top of dmesg
disable apm, acpi.
Check anything Hyperthreading related in dmesg.
Also, toggle the APIC config settings.
John.
Hello,
Quoted 10 lines
I'd guess power management, a runaway interrupt, bad mtrr settings, problems with the memory map decoding or Hyperthreading.
Check
/proc/interrupts/proc/mtrr
The memory detection results at the top of dmesg
disable apm, acpi.
Check anything Hyperthreading related in dmesg.
Here is the result with a kernel without APM and ACPI :
Boot process log, for memory/hyperthreading (but this is a P4, not a Xeon, so I guess there is no hyperthreading available) :
Linux version 2.5.53 ([email protected]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #23 Sun Dec 29 19:03:10 CET 2002 Video mode to be used for restore is f01
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126972 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=test ro BOOT_FILE=/boot/vmlinuz-2.5.53 hdd=scsi panic=30 console=ttyS0ide_setup: hdd=scsi -- BAD OPTION
Found and enabled local APIC!
Initializing CPU#0
Detected 2423.222 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 4784.12 BogoMIPS
Memory: 513636k/524272k available (2870k kernel code, 9844k reserved, 1098k data, 340k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev
-> /dev/console
-> /root
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Machine check exception polling timer started.
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2423.0556 MHz.
..... host bus clock speed is 134.0641 MHz.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket
mtrr: v2.0 (20020519)
PCI: PCI BIOS revision 2.10 entry at 0xf11a0, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.93 (c) Adam Belay
block request queues:
128 requests per read queue
128 requests per write queue
8 requests per batch
enter congestion at 31
exit congestion at 33
...
1 [19:09] rol@donald:~> cat /proc/interrupts
CPU0
0: 247202 XT-PIC timer 1: 15 XT-PIC i8042 2: 0 XT-PIC cascade 4: 293 XT-PIC serial 5: 0 XT-PIC EMU10K1 7: 221 XT-PIC eth0 8: 1 XT-PIC rtc 10: 724 XT-PIC aic7xxx 12: 52 XT-PIC i8042 14: 2906 XT-PIC ide0 15: 25 XT-PIC ide1 NMI: 0 LOC: 245939 ERR: 0 MIS: 0
2 [19:09] rol@donald:~> cat /proc/mtrr
reg00: base=0x00000000 ( 0MB), size= 512MB: write-back, count=1
reg01: base=0xd0000000 (3328MB), size= 256MB: write-combining, count=1
and final test : time make bzImage
real 6m1.191s user 5m32.214s sys 0m22.714s
You are correct, something coming out of APM/ACPI is breaking performance.
I'm going to try to identify more closely...
Regards,
Paul