Skip to contentSkip to conversation

Code: Bad EIP value

DISCUSSION l.scheelings 2 participants 2 messages Feb 3, 2003

lore
Share & tools
lore
#0 lore raw

Hi there, i have a little shutdown problem. I tried to find the answer on the internet,
irc channels and so on , but no one there knows. Someone in the mandrake irc channel at freenode.net advised me to turn to you.

I use mandrake dolphin 9.0 download version,
on an AMD k6 400 3d now, with dfi motherboard, and ami bios. when i shutdown after the message

powerdown

i get an error:

EIP: 0050:[<00008865>] Not tainted
EFLAGS: 00010046
eax: 0005301 ebx: 00000001 ecx: 00000000 edx: 00000000
esi: 00008136 edi: 00000296 ebp: 67890000 esp: c8ae7dd0
ds: 0058 es: 000 ss: 0018
Process halt cpid: 2559, stackpage+ c8ae70000
stack: 02968df 81360000 00000000

         0000000 00000000  81250058
         c01148dd 00000010

call Trace : [<c01148dd>] [<c0110000>]

Code: Bad EIP value

Is there any direction where is should look for this error?
and how can i get around it?
I tried the <linux noapic> at boot but that did not solve this error. When i turn off the power after this error and then power up the pc and boot agian everythings works as normal. < but wen shutting down the error is there agian.>

Hopefully you can give me some information , so that i can solve this litttle problem.

With lots of greeting from the netherlands,

[email protected]

Powered by GNU/linux

#1 lore raw
Quoted 7 lines · l.scheelings

EIP: 0050:[<00008865>] Not tainted
EFLAGS: 00010046
eax: 0005301 ebx: 00000001 ecx: 00000000 edx: 00000000
esi: 00008136 edi: 00000296 ebp: 67890000 esp: c8ae7dd0
ds: 0058 es: 000 ss: 0018
Process halt cpid: 2559, stackpage+ c8ae70000
stack: 02968df 81360000 00000000

Quoted 6 lines
          0000000 00000000  81250058
          c01148dd 00000010

call Trace : [<c01148dd>] [<c0110000>]

Code: Bad EIP value

It crashed in the BIOS code. A lot of old K6 boxes have bioses where the 32bit power down function Linux normally uses is buggy. Building a kernel with the apm real mode power down option might work better.