How to install two linux OSes on the same PC
Hi All,
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 ( /usr) ,/dev/hda8 ( /tmp),... /dev/hda11 etc.
But how can I install the rh 8.0 in partitions say /dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.
Please give your suggestions on how to resolve this problem.
At present my partition table with single installation (rh 7.2) is,
[root@creddy-pc root]# fdisk -l
Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System /dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 Linux
[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
I'm not remembering much about the RH install, but have you tried using a console durring the early part of the installand repointing the mount points to where you want them? This is a question that is best for RedHat's own lists. I know this can be done as I've done it in the past. It's been awhile since I've admined RedHat systems for developers. I'm only admining Debian systems now.
- Bryan
Quoted 21 lines · Narsimha Reddy CHALLA
Device Boot Start End Blocks Id System /dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 Linux[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 5 lines · Narsimha Reddy CHALLA
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say/dev/hda5( /) ,/dev/hda6(/home) ,/dev/hda7( /usr) ,/dev/hda8 ( /tmp),.../dev/hda11etc.
Quoted 8 lines
But how can I install the rh 8.0 in partitions say
/dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.
I believe the problem is related to Redhat's use of partition labels
by default on 7.x and 8.x. Makes it easy if the drives master/slave
changes but causes problems for other things like this.
For example, my /etc/fstab looks like:
LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext2 defaults 1 2 LABEL=/home /home ext3 defaults 1 2 /dev/hda3 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom iso9660 noauto,owner,kudzu,ro 0 0
Attempting to boot a system with two drives (or multiple partitions on the same drive) configured like this will confuse the system. So the first step would be to change the LABEL= lines to /dev/<device> (i.e./dev/hda1 /boot ......etc.)
Next issue is how you want to boot the two systems. One boot partition or two? With one boot, make a copy of what is already there, then install the new system, allowing it to overwrite the old. Then merge the two boot partitions by hand. They will already be a different kernels, etc. so it shouldn't be too hard.
Then I would recommend booting the second system or mounting its drives in the first temporarily and making similar changes to its fstab that we did to the first.
Then reboot and I believe it should work....
Good luck,
Dave V.
Signature · 4 lines
David E Vehrs, System Engineer Aspen Systems [email protected] 3900 Youngfield Street Tel: +01 303 431 4606 Wheat Ridge CO 80033, USA Fax: +01 303 431 7196 http://www.aspsys.com
Thanks a lot for your help. It really worked with disk driud. It cleverly managed the name conflicts of lables i.e. for first installation the root is "/" and for the second installation the root lable is "/1". After editing the /etc/lilo.conf of first installation and updating the MBR with /sbin/lilo appropriately, I can boot both of them.
Regards,
- Narsimha
Quoted 52 lines · Narsimha Reddy CHALLA
Hi All,
I want to do two different linux installations rh 7.2 and rh
8.0 on the same pc with single hard disk. I installed the rh 7.2 in partitions say/dev/hda5( /) ,/dev/hda6(/home) ,/dev/hda7( /usr) ,/dev/hda8( /tmp),.../dev/hda11etc.But how can I install the rh 8.0 in partitions say
/dev/hda12
( as "/" ) ... etc ?? Since the installer won't allow as there already exists a "/" partition for the rh 7.2 and tries to override it with the root partition of rh 8.0. So I tried giving a different lable to the root partition of rh 8.0 say /root1 and other partitions as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer is looking for the partition named "/" and without that the installation is not happening.Please give your suggestions on how to resolve this problem.
At present my partition table with single installation (rh 7.2) is,
[root@creddy-pc root]# fdisk -l
Disk
/dev/hda: 255 heads, 63 sectors, 2434 cylinders Units = cylinders of 16065 * 512 bytesDevice Boot Start End Blocks Id System
/dev/hda1 * 1 261 2096451 6 FAT16 /dev/hda2 262 2434 17454622+ 5 Extended /dev/hda5 262 522 2096451 6 FAT16 /dev/hda6 523 653 1052226 83 Linux /dev/hda7 654 1175 4192933+ 83 Linux /dev/hda8 1176 1371 1574338+ 83 Linux /dev/hda9 1372 1436 522081 82 Linux swap /dev/hda10 1437 1501 522081 83 Linux /dev/hda11 1502 1566 522081 83 Linux[root@creddy-pc root]#
TIA,
- Narsimha Reddy CH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 6 lines
Narsimha Reddy CH Storage Area Networking, HCL Technologies Contact +91-044 2372 8366 ext 1128 http://san.hcltech.com http://www.hcltech.com