Skip to contentSkip to conversation

file alignment of elf sections

DISCUSSION Felix Domke 1 participant 1 message Feb 11, 2003

lore
Share & tools
lore
#0 lore raw

hi,

i'm currently porting u-boot to a ppc405-based board, but i'm failing miserably at the first step - correct linking.

to make it short (and keep it a bit ontopic, sorry):

how can i tell ld to align the section in the FILE to 2^16 ? i have my .text-section started at (loading address) 5MB, and like to have it in the elf-file at 64k. i saw lds producing exactly this output, but in my case the .text-section starts immediately after the elf header. (the reason is that i have to convert the binary to a special format for the primary bootloader, and the tool for converting is rather dumb, but i don't want to invest time into fixing the tool since i didn't wrote it and nobody else cares about it).

There must be a simple option, but i can't find it :/ (even after googling around)

I have to admit that i did this before, but i can't remember HOW i did it.

felix

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/