vcdxrip , CDROM_SEND_PACKET, and 2.5.42->2.5.43 ide-cd changes
Hi,
I often use vcdxrip to pull mpeg data off of
old vcd's/svcds to archive to tape/dvd. This worked fine in the 2.5 kernel series up to
2.5.42 where it worked after running the app
more then once ( i assumed it was an initialization error someplace). After kernel 2.5.43 it no longer works. I've sent mail to the authors and they suggested switching it from using ioctl(CDROM_SEND_PACKET) to ioctl(CDROMREADMODE2) , which does work only
a little slower.
I've traced it down to cdrom_queue_packet_command() in ide-cd.c returning a 0 error status from ide_do_drive_cmd(), and req.data_len is 0, and there doesn't appear to be any sense available.
I'd appreciate any suggestions for tracking this further or ideas on possible causes.
-pee
Quoted 15 lines · Paul E. Erkkila
Hi,
I often use vcdxrip to pull mpeg data off of
old vcd's/svcds to archive to tape/dvd. This worked fine in the 2.5 kernel series up to
2.5.42 where it worked after running the app
more then once ( i assumed it was an initialization error someplace). After kernel 2.5.43 it no longer works. I've sent mail to the authors and they suggested switching it from usingioctl(CDROM_SEND_PACKET)to ioctl(CDROMREADMODE2) , which does work only
a little slower.
Quoted 4 lines
I've traced it down to
cdrom_queue_packet_command()inide-cd.creturning a 0 error status fromide_do_drive_cmd(), and req.data_len is 0, and there doesn't appear to be any sense available.
Hmm interesting, nothing comes to mind right now. I'll try vcdxrip myself, please tell me how you typically invoke it to produce the bug.
The best approach for 2.5.x and later is to use the SG_IO ioctl. It's similar in spirit to CDROM_SEND_PACKET, but much faster. CDROMREADMODE2 should work too, of course.
Signature · 1 line
Jens Axboe