pv_move failed

linux-lvm Dieter Stueken 2 participants 2 messages Feb 25, 2003

Share & tools

Dieter Stueken

author

2003-02-25 03:33 UTC #0 lore raw

I just got my new 240GB disk and want to move my VG to it. Unfortunately I get an unexpected error:

lv: /dev/backup/mirror[2] old_dev: 22:00 new_dev: 03:02
old_pe_sector: 117703032 new_pe_sector: 357564792
pvmove -- opening output physical volume "/dev/hda2"
pvmove -- llseeking input physical volume "/dev/hdc"
pvmove -- llseeking output physical volume "/dev/hda2"
pvmove -- /dev/hdc [PE 897 [mirror [LE 2727]] -> /dev/hda2 [PE 2727] [1/247] pvmove -- locking physical extent 897 of "/dev/hdc" in kernel pvmove -- about to read input physical volume "/dev/hdc" and to write output physical volume "/dev/hda2"
pvmove -- ERROR writing output physical volume "/dev/hda2" (still 12648448 bytes to write)
pvmove -- ERROR "pv_move_pe(): writing output PE" moving physical extents

this time I can not identify any reason an no messages on syslog. Any idea? What informations should I dump/post in addition?

I'm using SuSE8.1 with kernel 2.4.20, the LVM-version is 1.0.5.

... and, sorry for my ill formed subject line from last week.

Dieter

Signature · 4 lines

Dieter St�ken, con terra GmbH, M�nster
    [email protected]
    http://www.conterra.de/
    (0)251-7474-501

Heinz J . Mauelshagen

2003-02-25 09:19 UTC #1 lore raw

Dieter,

the first write to hda2 fails.
Could be a hardware installation problem with your new drive.

Have you tested if you can access hda2 fine without LVM ?

Regards,
Heinz -- The LVM Guy --

Quoted 16 lines · Dieter Stueken

I just got my new 240GB disk and want to move my VG to it. Unfortunately I get an unexpected error:
lv: /dev/backup/mirror[2] old_dev: 22:00 new_dev: 03:02
old_pe_sector: 117703032 new_pe_sector: 357564792
pvmove -- opening output physical volume "/dev/hda2"
pvmove -- llseeking input physical volume "/dev/hdc"
pvmove -- llseeking output physical volume "/dev/hda2"
pvmove -- /dev/hdc [PE 897 [mirror [LE 2727]] -> /dev/hda2 [PE 2727] [1/247] pvmove -- locking physical extent 897 of "/dev/hdc" in kernel pvmove -- about to read input physical volume "/dev/hdc" and to write output physical volume "/dev/hda2"
pvmove -- ERROR writing output physical volume "/dev/hda2" (still 12648448 bytes to write)
pvmove -- ERROR "pv_move_pe(): writing output PE" moving physical extents

Quoted 20 lines

this time I can not identify any reason an no messages on syslog. Any idea? What informations should I dump/post in addition?
I'm using SuSE8.1 with kernel 2.4.20, the LVM-version is 1.0.5.
... and, sorry for my ill formed subject line from last week.
Dieter
Signature · 11 lines
Dieter Stüken, con terra GmbH, Münster
     [email protected]
     http://www.conterra.de/
     (0)251-7474-501


_______________________________________________
linux-lvm mailing list
[email protected]
http://lists.sistina.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen Sistina Software Inc.
Senior Consultant/Developer Am Sonnenhang 11
56242 Marienrachdorf Germany
[email protected] +49 2626 141200

                                                       FAX 924446

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-