ACPI + IO-APIC power off by button problems
Hi, I have this configuration:
MSI KT4 Ultra MoBo
Athlon XP 2400+
Matrox G450
and this problem: with kernel 2.4.20 and without ACPI patch installed and IO-APIC support activated the system does not shutdown properly, and it reboots instead of turn off and if I try to turn off the PC by pressing the power off button it does nothing, as if I've never pressed it
Using instead the kernel 2.4.21-pre4 + lastest ACPI patch I've solved the power down issue , and now the system shutdown properly , but the button does not work again . Without IO-APIC the button works correctly. There are some incompatibilities between the PowerButton and the IO-APIC?
I've noticed this problem in my old mobo too, an ASUS CUV4X-EA
Thanks
Bye
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
A message that is not in the archive (sent off-list or not yet received): 3E62533A.7050505-nc/[email protected]
Have you configured acpid? You mention kernel and ACPI patch but nothing about the daemon...
Quoted 24 lines · AnonimoVeneziano
Hi, I have this configuration:
MSI KT4 Ultra MoBo
Athlon XP 2400+
Matrox G450and this problem: with kernel 2.4.20 and without ACPI patch installed and IO-APIC support activated the system does not shutdown properly, and it reboots instead of turn off and if I try to turn off the PC by pressing the power off button it does nothing, as if I've never pressed it
Using instead the kernel 2.4.21-pre4 + lastest ACPI patch I've solved the power down issue , and now the system shutdown properly , but the button does not work again . Without IO-APIC the button works correctly. There are some incompatibilities between the PowerButton and the IO-APIC?
I've noticed this problem in my old mobo too, an ASUS CUV4X-EA
Thanks
Bye
Quoted 8 lines
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Acpi-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-devel
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 37 lines · [email protected] wrote:
Have you configured acpid? You mention kernel and ACPI patch but nothing about the daemon...
Quoted 28 lines · AnonimoVeneziano
Hi, I have this configuration:
MSI KT4 Ultra MoBo
Athlon XP 2400+
Matrox G450and this problem: with kernel 2.4.20 and without ACPI patch installed and IO-APIC support activated the system does not shutdown properly, and it reboots instead of turn off and if I try to turn off the PC by pressing the power off button it does nothing, as if I've never pressed it
Using instead the kernel 2.4.21-pre4 + lastest ACPI patch I've solved the power down issue , and now the system shutdown properly , but the button does not work again . Without IO-APIC the button works correctly. There are some incompatibilities between the PowerButton and the IO-APIC?
I've noticed this problem in my old mobo too, an ASUS CUV4X-EA
Thanks
Bye
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Acpi-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-devel
acpid is installed and works correctly (of course , if IO-APIC is disabled ;-) ) .
Any ideas? This problem is known by anyone or is only a my problem?
Thanks for Help
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf