- PC300 driver for kernel 2.4 (1/6)
Subsystems (2)
PATCH 1/1 - PC300 driver for kernel 2.4 (1/6)
Hello Marcelo !!!
Please apply this patch that includes support to all Cyclades-PC300 cards on the kernel 2.4. The patch was made against the kernel 2.4.21-pre5 (2.4.20 with the 2.4.21-pre5 patch). If you have any doubt or problem regarding this patch please let me know. If you're not the one who should be receiving this patch I'm sorry, please refer me to whoever takes care of the wan driver.
As the patch is big it's split into 6 e-mails.
This is the part 1/6
Documentation/Configure.help +21 -0
@@ -17279,6 +17279,27 @@ If you want to compile this driver as a module, say M here and read <file:Documentation/modules.txt>. The module will be called pcxx.o. +Cyclades-PC300 support +CONFIG_PC300 + This is a driver for the Cyclades-PC300 synchronous communication + boards. These boards provide synchronous serial interfaces to your + Linux box (interfaces currently available are RS-232/V.35, X.21 and + T1/E1). If you wish to support Multilink PPP, please select the + option below this one and read the file README.mlppp provided by PC300 + package. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read Documentation/modules.txt. The module will be + called pc300.o. + + If you haven't heard about it, it's safe to say N. + +Cyclades-PC300 Sync TTY (to MLPPP) support +CONFIG_PC300_MLPPP + Say 'Y' to this option if you are planning to use Multilink PPP over the + PC300 synchronous communication boards. + SDL RISCom/8 card support CONFIG_RISCOM8 This is a driver for the SDL Communications RISCom/8 multiport card,
drivers/net/wan/Config.in +4 -0
@@ -76,6 +76,18 @@ else comment ' X.25/LAPB support is disabled' fi + if [ "$CONFIG_PCI" != "n" ]; then + dep_tristate ' Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)' CONFIG_PC300 $CONFIG_HDLC + if [ "$CONFIG_PC300" != "n" ]; then +
if ["$CONFIG_PPP" != "n" -a "$CONFIG_PPP_MULTLINK" != "n" -a
"$CONFIG_PPP_SYNCTTY" != "n" -a "$CONFIG_HDLC_PPP" = "y"]; +
then
+
bool ' Cyclades-PC300 MLPPP support' CONFIG_PC300_MLPPP
+
else
+
comment ' Cyclades-PC300 MLPPP support is disabled. You have to enable
PPP, PPP_MULTILINK'
+
comment ' PPP_SYNCTTY and HDLC_PPP to use this package.'
+
fi
+ fi
+ fi
dep_tristate ' SDL RISCom/N2 support' CONFIG_N2 $CONFIG_HDLC
dep_tristate ' Moxa C101 support' CONFIG_C101 $CONFIG_HDLC
dep_tristate ' FarSync T-Series support' CONFIG_FARSYNC $CONFIG_HDLC
drivers/net/wan/Makefile +1 -1
@@ -9,7 +9,7 @@ O_TARGET := wan.o -export-objs = z85230.o syncppp.o comx.o sdladrv.o cycx_drv.o hdlc_generic.o +export-objs = z85230.o syncppp.o comx.o sdladrv.o cycx_drv.o hdlc_generic.o pc300_drv.o list-multi = wanpipe.o cyclomx.o wanpipe-objs = sdlamain.o sdla_ft1.o $(wanpipe-y)
@@ -30,6 +30,8 @@ hdlc-$(CONFIG_HDLC_X25) += hdlc_x25.o hdlc-objs
:= $(hdlc-y)
+pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o
+
obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o
obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o
obj-$(CONFIG_COMX) +=
comx.o
@@ -70,6 +72,7 @@
obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o
obj-$(CONFIG_LAPBETHER) += lapbether.o
obj-$(CONFIG_SBNI) += sbni.o
+obj-$(CONFIG_PC300)
+= pc300.o
obj-$(CONFIG_HDLC) += hdlc.o
ifeq ($(CONFIG_HDLC_PPP),y)
obj-$(CONFIG_HDLC) += syncppp.o
@@ -79,6 +82,9 @@
include $(TOPDIR)/Rules.make
+pc300.o: pc300_drv.o $(pc300-y)
+ $(LD) -r -o $@ pc300_drv.o $(pc300-y)
+
hdlc.o: $(hdlc-objs)
$(LD) -r -o $@ $(hdlc-objs)