Skip to contentSkip to conversation

Why CONFIG_USB = y is default?

DISCUSSION Andrei Boros 2 participants 2 messages Mar 13, 2003

lore
Share & tools
lore
#0 lore raw

I was looking in the driver at Makefile.conf and I see :
CONFIG_USB = y.
I did not mention anything about USB to ./configure and I have no USB card.
I did however specify manually two drivers to be built (cs46xx and opti92x-ad1848), so what's USB doing here?

Signature · 11 lines
ing. Andrei Boros
mailto:[email protected] / +40-21-303-1870
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune


-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! 
Get cracking and register here for some mind boggling fun and 
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en
#1 lore raw

At Thu, 13 Mar 2003 13:41:58 +0200,

Quoted 8 lines · Andrei Boros

I was looking in the driver at Makefile.conf and I see :
CONFIG_USB = y.
I did not mention anything about USB to ./configure and I have no USB card.
I did however specify manually two drivers to be built (cs46xx and opti92x-ad1848), so what's USB doing here?

this variable does mean that your kernel supports USB interface. it doesn't mean that ALSA usb-audio driver will be built. it's specified by CONFIG_SND_USB_AUDIO.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en