Skip to contentSkip to conversation

dummy driver and Makefile inconsistency

DISCUSSION Andrei Boros 2 participants 2 messages Mar 19, 2003

lore
Share & tools
lore
#0 lore raw

alsa-kernel/core/seq/Makefile contains the following:

obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o

However, there is no definition of CONFIG_SND_SEQ_DUMMY anywhere !!!

I believe CONFIG_SND_SEQ_DUMMY should be set to "m" if dummy driver and sequencer support are enabled.

---------------------------------------------------------------
I made several changes so that ./configure sets this properly and the module gets built properly, but I am having some trouble integrating it with autoconf in the cvs tree before running cvscompile.

Here are the modifications I made in my alsa-driver/ :

Makefile line 50:
-----------------------------------------------------------------
CONFIG_PCMCIA = @CONFIG_PCMCIA@
CONFIG_SND_SEQUENCER = @CONFIG_SND_SEQUENCER@
+CONFIG_SND_SEQ_DUMMY = @CONFIG_SND_SEQ_DUMMY@
CONFIG_SND_OSSEMUL = @CONFIG_SND_OSSEMUL@
ifeq (y,$(CONFIG_SND_OSSEMUL))
CONFIG_SND_MIXER_OSS = m
CONFIG_SND_PCM_OSS = m
-----------------------------------------------------------------
configure.in line 792 :
-----------------------------------------------------------------
fi
AC_SUBST(CONFIG_SND_SEQUENCER)
+dnl if test "$CONFIG_SND_DUMMY" = "m"; then

+  CONFIG_SND_SEQ_DUMMY="m"
+  AC_SUBST(CONFIG_SND_SEQ_DUMMY)
+  AC_DEFINE_CONFIG_SND_SEQ_DUMMY)

+dnl fi
if test "$CONFIG_SND_SEQUENCER" = "m"; then
AC_DEFINE(CONFIG_SND_SEQUENCER)
-----------------------------------------------------------------
configure line 2930 : (I don't know how to integrate this with autoconf and cvscompile)
-----------------------------------------------------------------
#define CONFIG_SND_DUMMY_MODULE 1
EOF
+ if test "$CONFIG_SND_SEQUENCER" = "m"; then
+ CONFIG_SND_SEQ_DUMMY="m"
+ fi

CONFIG_SND_VIRMIDI="m"
cat >> confdefs.h <<\EOF
-----------------------------------------------------------------
configure line 3408 : (I don't know how to integrate this with autoconf and cvscompile)
-----------------------------------------------------------------
#define CONFIG_SND_DUMMY_MODULE 1
EOF
+ if test "$CONFIG_SND_SEQUENCER" = "m"; then
+ CONFIG_SND_SEQ_DUMMY="m"
+ fi

                ;;

-----------------------------------------------------------------

Signature · 11 lines
ing. Andrei Boros
mailto:[email protected] / +40-21-303-1870
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune


-------------------------------------------------------
This SF.net email is sponsored by: Does your code think in ink? 
You could win a Tablet PC. Get a free Tablet PC hat just for playing. 
What are you waiting for?
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en
#1 lore raw

At Wed, 19 Mar 2003 10:48:09 +0200,

Quoted 7 lines · Andrei Boros

alsa-kernel/core/seq/Makefile contains the following:

obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o

However, there is no definition of CONFIG_SND_SEQ_DUMMY anywhere !!!

thanks for finding this.
fixed on cvs now.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: Does your code think in ink? You could win a Tablet PC. Get a free Tablet PC hat just for playing. What are you waiting for?
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en