Skip to contentSkip to conversation

Recording

DISCUSSION Manuel Jander 2 participants 2 messages Mar 23, 2003 – Mar 26, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I'm having serious trouble implementing record support into the Aureal Vortex driver. I get total lockups...

The obvious answer would be: the cards overwrites your kernel :) ... but i double checked that. If that would be the case, playback wouldnt work either (i would hear noise, or at least a crack). I'm using the same operator functions (callbacks) for recording and playback with some very few branch code to decide between record and playback.

Is there something like a typical pitfal list ? Any important difference when recording instead of playback ? Can i use runtime->dma_addr just as when doing playback for the DMA address programmed into the SoundCard ?

If anyone has something to say about recording, please tell me

Best Regards

Manuel Jander

-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en

#1 lore raw

At Sun, 23 Mar 2003 02:08:51 -0400,

Quoted 15 lines · Manuel Jander

Hello,

I'm having serious trouble implementing record support into the Aureal Vortex driver.
I get total lockups...

The obvious answer would be: the cards overwrites your kernel :) ... but i double checked
that. If that would be the case, playback wouldnt work either (i would hear noise, or at least a crack).
I'm using the same operator functions (callbacks) for recording and playback with some very few
branch code to decide between record and playback.

Quoted 3 lines

Is there something like a typical pitfal list ? Any important difference when recording
instead of playback ?

i don't know of any big differences between playback and capture except for the hardwares which need buffer copy.

Quoted 3 lines

Can i use runtime->dma_addr just as when doing
playback for
the DMA address programmed into the SoundCard ?

yes.

hmm, what i would check are

- the buffer allocation and the hardware config are ok?

	-> check debug print in prepare()
- interrupts properly acknowledged?
	-> check the interrupt handler
- any spin dead locks?
	-> removing locks first (for UP)

and if alt+sysrq works, you can get the trace.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by:
The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today!
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en