Skip to contentSkip to conversation

Problems with pppoe and nat

DISCUSSION Damphyr 1 participant 1 message Apr 9, 2003

lore
Share & tools
lore

Damphyr

author
#0 lore raw

I am having problems setting up NAT for my home LAN.

I get the following:

frigorifero root # iptables -v -t nat -A POSTROUTING -o ppp0 -j MASQUERADE MASQUERADE all opt -- in * out ppp0 0.0.0.0/0 -> 0.0.0.0/0
iptables: Invalid argument

ifconfig gives me:

eth0 Link encap:Ethernet HWaddr 00:E0:29:09:C0:03
inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3030 errors:0 dropped:0 overruns:0 frame:0 TX packets:2349 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100
RX bytes:225218 (219.9 Kb) TX bytes:461036 (450.2 Kb) Interrupt:10 Base address:0xe400

eth1 Link encap:Ethernet HWaddr 00:C0:DF:0E:6D:87
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:175 errors:0 dropped:0 overruns:0 frame:0 TX packets:177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100
RX bytes:11152 (10.8 Kb) TX bytes:11597 (11.3 Kb) Interrupt:12 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

ppp0 Link encap:Point-to-Point Protocol

          inet addr:217.234.xxx.xxx  P-t-P:217.5.xxx.xxx 

Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3
RX bytes:934 (934.0 b) TX bytes:664 (664.0 b)

and iptables says:

frigorifero root # iptables -h
iptables v1.2.7a

My PPP link is a DSL line, I use rp-pppoe and I up it using adsl-start.

Can anyone tell me what am I doing wrong?
Thanks,
V.-

--
http://www.freemail.gr - δωρεάν υπηρεσία ηλεκτρονικού ταχυδρομείου.