Skip to contentSkip to conversation

Envy24-VT1712 Interrupt by Input Lines

DISCUSSION Chien Lee 3 participants 3 messages Apr 23, 2003 – Apr 24, 2003

lore
Share & tools
lore

Chien Lee

author
#0 lore raw

Hi,

I have a question regarding to how to find out which input line (PSDIN0-PSDIN3)
is interrupting Envy24-VT1712 PCI Audio Controller.

VT1712's Professional Multi-Track Control Register MT00 provides bit 1 for
Multi-track record interrupt status. It only shows that there is an interrupt occurred
for recording. It does not indentify which input line is the source. If I am recording
PSDIN1audio signal and there is signal present at PSDIN0, I would get interrupted
and record a wrong signal from PSDIN0.

Is there any way that I can find out which input line is interrupting the chip?

Thanks,
Chien.

Disclaimer: The information contained in this transmission, including any attachments, may contain confidential information of Matsushita Avionics Systems Corporation. This transmission is intended only for the use of the addressee(s) listed above. Unauthorized review, dissemination or other use of the information contained in this transmission is strictly prohibited. If you have received this transmission in error or have reason to believe you are not authorized to receive it, please notify the sender by return email and promptly delete the transmission.

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw
Quoted 14 lines

I have a question regarding to how to find out which input line (PSDIN0-PSDIN3)
is interrupting Envy24-VT1712 PCI Audio Controller.

VT1712's Professional Multi-Track Control Register MT00 provides bit 1 for
Multi-track record interrupt status. It only shows that there is an interrupt occurred
for recording. It does not indentify which input line is the source. If I am recording
PSDIN1audio signal and there is signal present at PSDIN0, I would get interrupted
and record a wrong signal from PSDIN0.

Quoted 2 lines

Is there any way that I can find out which input line is interrupting the chip?

either there is something rather subtle about what you are asking, and i have misunderstood your question, or you don't understand how an audio interface like the envy24 works.

if the latter: input lines are not the cause of interrupts. they are the source of a signal. interrupts are generated when the audio interface decides to do so, which is generally based on an interval of time, measured either in audio frames or absolute time, since the last interrupt.

if the former: sorry for misunderstanding you.

--p

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
In reply to Chien Lee
Quoted 16 lines · Chien Lee

Hi,

I have a question regarding to how to find out which input line (PSDIN0-PSDIN3)
is interrupting Envy24-VT1712 PCI Audio Controller.

VT1712's Professional Multi-Track Control Register MT00 provides bit 1 for
Multi-track record interrupt status. It only shows that there is an interrupt occurred
for recording. It does not indentify which input line is the source. If I am recording
PSDIN1audio signal and there is signal present at PSDIN0, I would get interrupted
and record a wrong signal from PSDIN0.

Quoted 2 lines

Is there any way that I can find out which input line is interrupting the chip?

All input lines are captured at once in interleaved sample frames. There is 12 capture channels. Hardware vendors usually connects 0-7 channels as analog, 8-9 as S/PDIF and 10-11 is the digital stereo mixer which contains result of playback and captured channels controlled with a matrix mixer.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf