Serious problem with MAKEDEV and setserial command
Hi!
I have a serious problem with the MAKEDEV and setserial command. I'm trying to put a lots of multimodem card into a standard linux pc (Slakware 8.1). I have to associate the modem by myself with the setserial command. For this, I do:
setserial /dev/ttyS20 irq 10 port 0xd000 ^auto_irq ^fourport skip_test autoconfig
Everything works fine. The problem is that there's no enough ttyS. On my linux box, I have ttyS1 to ttyS31, but I want more of them.
I triyed the /dev/MAKEDEV command (and I changed the group for uucp). The new dev was created (ttyS32). I tried to make a setserial it and I got:
Cannot set serial info: Invalid argument
Tried a lot of time, from different method; nothing to do. I always have the same error message. I think it's my /dev/ttyS32 that doesn't work (because the same instruction with a ttyS that wasn't created by me works great).
Does somebody could help me please? I just don't what to do. (and yes, I RTFM! :) In fact, 2 books and the serial howto...
Thx,
Sam
Signature · 15 lines
Samuel Jobin [email protected] Software Development _____________________ --== GNI inc.==-- 5075 Wilfrid-Hamel O. Suite 220 Québec (QC), G2E 5G3 Phone: (418) 864-7721 Fax: (418) 263-3150 - To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sam.
Quoted 10 lines
I have a serious problem with the MAKEDEV and setserial command. I'm trying to put a lots of multi-modem card into a standard Linux PC (Slackware 8.1). I have to associate the modem by myself with the setserial command. For this, I do:
setserial
/dev/ttyS20irq 10 port0xd000^auto_irq ^fourport \
skip_testautoconfigEverything works fine. The problem is that there's no enough ttyS. On my Linux box, I have ttyS1 to ttyS31, but I want more of them.
It's possible that your MAKEDEV hasn't been taught how to create more than 32 serial ports. The following commands should in theory create all the valid ttyS ports, according to the devices.txt in the current kernels...
cd /dev
rm -f ttyS*
for N in seq 0 191 ; do mknod ttyS${N} c 4 $[${N}+64] ; done chown uucp. ttyS*
...and watch the type of brackets on the third line as they do matter.
Quoted 3 lines
I tried the
/dev/MAKEDEVcommand (and I changed the group for uucp). The new dev was created (ttyS32). I tried to make a setserial it and I got:
As stated above, it's quite possible that your MAKEDEV doesn't know how to do this as few systems have that many serial ports.
Best wishes from Riley.
---
* Nothing as pretty as a smile, nothing as ugly as a frown.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.476 / Virus Database: 273 - Release Date: 24-Apr-2003