Updated kexec diffs...

This is my next round of kexec inspired kernel patches.

kexec seems good at reproducing what are otherwise almost inaccessible corner cases in the kernel reboot/initialization code paths.

Also available at:
http://www.xmission.com/~ebiederm/files/kexec/

reboot_on_bsp consolidates all of the places x86 attempts to reboot on the bootstrap processor and fixes it so the code will also work when called from interrupt context.

apic_shutdown returns the local apics to virtual wire mode.
This may need some extending at some point but it seems to be enough.

i8259_shutdown disables all interrupts through the legacy pic.

hwfixes-x86kexec is kexec built on top of the previous patches. It should stand independent of apic_shtudown and i8259_shutdown, but there is a dependency on reboot_on_bsp.

So far everything is just compile tested, and split apart for better maintenance. I am starting on real world tests shortly.

Eric

diff -uNr linux-2.5.69/arch/i386/kernel/apic.c linux-2.5.69.reboot_on_bsp/arch/i386/kernel/apic.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/mc146818rtc.h>
 #include <linux/kernel_stat.h>
+#include <linux/reboot.h>
 
 #include <asm/atomic.h>
 #include <asm/smp.h>

@@ -37,6 +38,7 @@
 #include <mach_apic.h>
 
 #include "io_ports.h"
+#include "mach_reboot.h"
 
 void __init apic_intr_init(void)
 {

@@ -1114,6 +1116,64 @@
 	printk (KERN_INFO "APIC error on CPU%d: %02lx(%02lx)\n",
 	        smp_processor_id(), v , v1);
 	irq_exit();
+}
+
+
+struct stop_apics {
+	NORET_TYPE void (*rest)(void *info) ATTRIB_NORET;
+	void *info;
+	int reboot_cpu_id;
+};
+
+static void cpu_stop_apics(void *ptr)
+{
+	struct stop_apics *arg = ptr;
+	if (smp_processor_id() != arg->reboot_cpu_id) {
+		local_irq_disable();
+		disable_local_APIC();
+		stop_this_cpu();
+	}
+	local_irq_disable();
+	disable_local_APIC();
+	local_irq_enable();
+
+#if defined(CONFIG_X86_IO_APIC)
+	if (smp_found_config) {
+		disable_IO_APIC();
+	}
+#endif
+	disconnect_bsp_APIC();
+	arg->rest(arg->info);
+}
+
+void stop_apics(NORET_TYPE void(*rest)(void *)ATTRIB_NORET, void *info)
+{
+	/* By resetting the APIC's we disable the nmi watchdog */
+	extern int reboot_cpu;
+	struct stop_apics arg;
+	
+ 	/* The boot cpu is always logical cpu 0 */
+	arg.rest = rest;
+	arg.info = info;
+	arg.reboot_cpu_id = 0;
+	
+	/* See if there has been give a command line override .
+	 */
+	if ((reboot_cpu != -1) && cpu_possible(reboot_cpu)) {
+		arg.reboot_cpu_id = reboot_cpu;
+	}
+
+	/* Make certain the the cpu I'm rebooting on is online */
+	if (!cpu_online(arg.reboot_cpu_id)) {
+		arg.reboot_cpu_id = smp_processor_id();
+	}
+	/* If we aren't in interrupt context use the scheduler,
+	 * so rest will not be called in an interrupt context either.
+	 */
+	if (!in_interrupt()) {
+		set_cpus_allowed(current, 1 << arg.reboot_cpu_id);
+	}
+	on_each_cpu(cpu_stop_apics, &arg, 1, 0);
 }
 
 /*

diff -uNr linux-2.5.69/arch/i386/kernel/apm.c linux-2.5.69.reboot_on_bsp/arch/i386/kernel/apm.c
@@ -911,17 +911,8 @@
 	/*
 	 * This may be called on an SMP machine.
 	 */
-#ifdef CONFIG_SMP
-	/* Some bioses don't like being called from CPU != 0 */
-	if (smp_processor_id() != 0) {
-		set_cpus_allowed(current, 1 << 0);
-		if (unlikely(smp_processor_id() != 0))
-			BUG();
-	}
-#endif
 	if (apm_info.realmode_power_off)
 	{
-		(void)apm_save_cpus();
 		machine_real_restart(po_bios_call, sizeof(po_bios_call));
 	}
 	else

diff -uNr linux-2.5.69/arch/i386/kernel/dmi_scan.c linux-2.5.69.reboot_on_bsp/arch/i386/kernel/dmi_scan.c
@@ -220,31 +220,6 @@
 	return 0;
 }
 
-/*
- * Some machines require the "reboot=s"  commandline option, this quirk makes that automatic.
- */
-static __init int set_smp_reboot(struct dmi_blacklist *d)
-{
-#ifdef CONFIG_SMP
-	extern int reboot_smp;
-	if (reboot_smp == 0)
-	{
-		reboot_smp = 1;
-		printk(KERN_INFO "%s series board detected. Selecting SMP-method for reboots.\n", d->ident);
-	}
-#endif
-	return 0;
-}
-
-/*
- * Some machines require the "reboot=b,s"  commandline option, this quirk makes that automatic.
- */
-static __init int set_smp_bios_reboot(struct dmi_blacklist *d)
-{
-	set_smp_reboot(d);
-	set_bios_reboot(d);
-	return 0;
-}
 
 /*
  * Some bioses have a broken protected mode poweroff and need to use realmode

@@ -554,7 +529,7 @@
 			MATCH(DMI_BIOS_VERSION, "4.60 PGMA"),
 			MATCH(DMI_BIOS_DATE, "134526184"), NO_MATCH
 			} },
-	{ set_smp_bios_reboot, "Dell PowerEdge 1300", {	/* Handle problems with rebooting on Dell 1300's */
+	{ set_bios_reboot, "Dell PowerEdge 1300", {	/* Handle problems with rebooting on Dell 1300's */
 			MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
 			MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"),
 			NO_MATCH, NO_MATCH

diff -uNr linux-2.5.69/arch/i386/kernel/io_apic.c linux-2.5.69.reboot_on_bsp/arch/i386/kernel/io_apic.c
@@ -1545,8 +1545,6 @@
 	 * Clear the IO-APIC before rebooting:
 	 */
 	clear_IO_APIC();
-
-	disconnect_bsp_APIC();
 }
 
 /*

diff -uNr linux-2.5.69/arch/i386/kernel/smp.c linux-2.5.69.reboot_on_bsp/arch/i386/kernel/smp.c
@@ -539,32 +539,6 @@
 	return 0;
 }
 
-static void stop_this_cpu (void * dummy)
-{
-	/*
-	 * Remove this CPU:
-	 */
-	clear_bit(smp_processor_id(), &cpu_online_map);
-	local_irq_disable();
-	disable_local_APIC();
-	if (cpu_data[smp_processor_id()].hlt_works_ok)
-		for(;;) __asm__("hlt");
-	for (;;);
-}
-
-/*
- * this function calls the 'stop' function on all other CPUs in the system.
- */
-
-void smp_send_stop(void)
-{
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
-
-	local_irq_disable();
-	disable_local_APIC();
-	local_irq_enable();
-}
-
 /*
  * Reschedule call back. Nothing to do,
  * all the work is done automatically when

diff -uNr linux-2.5.69/include/asm-i386/apic.h linux-2.5.69.reboot_on_bsp/include/asm-i386/apic.h
@@ -3,6 +3,7 @@
 
 #include <linux/config.h>
 #include <linux/pm.h>
+#include <linux/linkage.h>
 #include <asm/fixmap.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>

@@ -99,6 +100,18 @@
 #define NMI_LOCAL_APIC	2
 #define NMI_INVALID	3
 
+extern NORET_TYPE void 
+stop_apics(NORET_TYPE void (*rest)(void *info) ATTRIB_NORET, void *info) 
+ATTRIB_NORET;
+#else
+static inline NORET_TYPE void 
+stop_apics(NORET_TYPE void (*rest)(void *info) ATTRIB_NORET, void *info)
+ATTRIB_NORET;
+static inline void 
+stop_apics(NORET_TYPE void (*rest)(void *info) ATTRIB_NORET, void *info)
+{
+	rest(info); 
+}
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #endif /* __ASM_APIC_H */

diff -uNr linux-2.5.69/include/asm-i386/mach-default/mach_reboot.h linux-2.5.69.reboot_on_bsp/include/asm-i386/mach-default/mach_reboot.h
@@ -27,4 +27,6 @@
 	}
 }
 
+void stop_this_cpu(void);
+
 #endif /* !_MACH_REBOOT_H */

diff -uNr linux-2.5.69/include/linux/reboot.h linux-2.5.69.reboot_on_bsp/include/linux/reboot.h
@@ -35,6 +35,7 @@
 #ifdef __KERNEL__
 
 #include <linux/notifier.h>
+#include <linux/linkage.h>
 
 extern int register_reboot_notifier(struct notifier_block *);
 extern int unregister_reboot_notifier(struct notifier_block *);

@@ -44,9 +45,9 @@
  * Architecture-specific implementations of sys_reboot commands.
  */
 
-extern void machine_restart(char *cmd);
-extern void machine_halt(void);
-extern void machine_power_off(void);
+NORET_TYPE void machine_restart(char *cmd) ATTRIB_NORET;
+NORET_TYPE void machine_halt(void) ATTRIB_NORET;
+NORET_TYPE void machine_power_off(void) ATTRIB_NORET;
 
 #endif
 

diff -uNr linux-2.5.69/kernel/panic.c linux-2.5.69.reboot_on_bsp/kernel/panic.c
@@ -63,7 +63,7 @@
 		sys_sync();
 	bust_spinlocks(0);
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && !defined(__i386__)
 	smp_send_stop();
 #endif
 

diff -uNr linux-2.5.69/kernel/sys.c linux-2.5.69.reboot_on_bsp/kernel/sys.c
@@ -415,8 +415,6 @@
 		device_shutdown();
 		printk(KERN_EMERG "System halted.\n");
 		machine_halt();
-		unlock_kernel();
-		do_exit(0);
 		break;
 
 	case LINUX_REBOOT_CMD_POWER_OFF:

@@ -425,8 +423,6 @@
 		device_shutdown();
 		printk(KERN_EMERG "Power down.\n");
 		machine_power_off();
-		unlock_kernel();
-		do_exit(0);
 		break;
 
 	case LINUX_REBOOT_CMD_RESTART2:

diff -uNr linux-2.5.69/arch/i386/kernel/apic.c linux-2.5.69.apic_shutdown/arch/i386/kernel/apic.c
@@ -171,6 +171,36 @@
 		outb(0x70, 0x22);
 		outb(0x00, 0x23);
 	}
+	else {
+		/* Go back to Virtual Wire compatibility mode */
+		unsigned long value;
+
+		/* For the spurious interrupt use vector F, and enable it */
+		value = apic_read(APIC_SPIV);
+		value &= ~APIC_VECTOR_MASK; 
+		value |= APIC_SPIV_APIC_ENABLED;
+		value |= 0xf;
+		apic_write_around(APIC_SPIV, value);
+
+		/* For LVT0 make it edge triggered, active high, external and enabled */
+		value = apic_read(APIC_LVT0);
+		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | 
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | 
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
+		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXINT);
+		apic_write_around(APIC_LVT0, value);
+		
+		/* For LVT1 make it edge triggered, active high, nmi and enabled */
+		value = apic_read(APIC_LVT1);
+		value &= ~(
+			APIC_MODE_MASK | APIC_SEND_PENDING | 
+			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | 
+			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+		apic_write_around(APIC_LVT1, value);
+	}
 }
 
 void disable_local_APIC(void)

diff -uNr linux-2.5.69/include/asm-i386/apicdef.h linux-2.5.69.apic_shutdown/include/asm-i386/apicdef.h
@@ -93,6 +93,7 @@
 #define			APIC_LVT_REMOTE_IRR		(1<<14)
 #define			APIC_INPUT_POLARITY		(1<<13)
 #define			APIC_SEND_PENDING		(1<<12)
+#define			APIC_MODE_MASK			0x700
 #define			GET_APIC_DELIVERY_MODE(x)	(((x)>>8)&0x7)
 #define			SET_APIC_DELIVERY_MODE(x,y)	(((x)&~0x700)|((y)<<8))
 #define				APIC_MODE_FIXED		0x0

diff -uNr linux-2.5.69/arch/i386/kernel/i8259.c linux-2.5.69.i8259_shutdown/arch/i386/kernel/i8259.c
@@ -245,10 +245,21 @@
 	return 0;
 }
 
+static void i8259A_shutdown(struct device *dev)
+{   
+	/* Put the i8259A into a quiescent state that
+	 * the kernel initialization code can get it
+	 * out of.
+	 */
+	outb(0xff, 0x21);	/* mask all of 8259A-1 */
+	outb(0xff, 0xA1);	/* mask all of 8259A-1 */
+}
+
 static struct device_driver i8259A_driver = {
 	.name		= "pic",
 	.bus		= &system_bus_type,
 	.resume		= i8259A_resume,
+	.shutdown	= i8259A_shutdown,
 };
 
 static struct sys_device device_i8259A = {

diff -uNr linux-2.5.69.hwfixes/MAINTAINERS linux-2.5.69.hwfixes-x86kexec/MAINTAINERS
@@ -1062,6 +1062,14 @@
 W:	http://www.cse.unsw.edu.au/~neilb/patches/linux-devel/
 S:	Maintained
 
+KEXEC
+P:	Eric Biederman
+M:	[email protected]
+M:	[email protected]
+W:	http://www.xmission.com/~ebiederm/files/kexec/
+L:	[email protected]
+S:	Maintained
+
 LANMEDIA WAN CARD DRIVER
 P:	Andrew Stanley-Jones
 M:	[email protected]

diff -uNr linux-2.5.69.hwfixes/arch/i386/Kconfig linux-2.5.69.hwfixes-x86kexec/arch/i386/Kconfig
@@ -767,6 +767,23 @@
 	depends on (X86_SUMMIT && NUMA)
 	default y
 
+config KEXEC
+	bool "kexec system call (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  kexec is a system call that implements the ability to  shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is indepedent of the system firmware.   And like a reboot
+	  you can start any kernel with it not just Linux.  
+	
+	  The name comes from the similiarity to the exec system call. 
+	
+	  It is on an going process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  It may help to enable device hotplugging
+	  support.  As of this writing the exact hardware interface is
+	  strongly in flux, so no good recommendation can be made.
+
 endmenu
 
 

diff -uNr linux-2.5.69.hwfixes/arch/i386/kernel/Makefile linux-2.5.69.hwfixes-x86kexec/arch/i386/kernel/Makefile
@@ -23,6 +23,7 @@
 obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= suspend.o suspend_asm.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq.o
 obj-$(CONFIG_EDD)             	+= edd.o

diff -uNr linux-2.5.69.hwfixes/arch/i386/kernel/entry.S linux-2.5.69.hwfixes-x86kexec/arch/i386/kernel/entry.S
@@ -852,6 +852,7 @@
  	.long sys_clock_gettime		/* 265 */
  	.long sys_clock_getres
  	.long sys_clock_nanosleep
+	.long sys_kexec_load
  
  
 nr_syscalls=(.-sys_call_table)/4

diff -uNr linux-2.5.69.hwfixes/include/asm-i386/kexec.h linux-2.5.69.hwfixes-x86kexec/include/asm-i386/kexec.h
@@ -0,0 +1,23 @@
+#ifndef _I386_KEXEC_H
+#define _I386_KEXEC_H
+
+#include <asm/fixmap.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
+ * calculation for the amount of memory directly mappable into the
+ * kernel memory space.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_REBOOT_CODE_SIZE	4096
+
+#endif /* _I386_KEXEC_H */

diff -uNr linux-2.5.69.hwfixes/include/asm-i386/unistd.h linux-2.5.69.hwfixes-x86kexec/include/asm-i386/unistd.h
@@ -273,8 +273,9 @@
 #define __NR_clock_gettime	(__NR_timer_create+6)
 #define __NR_clock_getres	(__NR_timer_create+7)
 #define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_sys_kexec_load	268
 
-#define NR_syscalls 268
+#define NR_syscalls 269
 
 /* user-visible error numbers are in the range -1 - -124: see <asm-i386/errno.h> */
 

diff -uNr linux-2.5.69.hwfixes/include/linux/reboot.h linux-2.5.69.hwfixes-x86kexec/include/linux/reboot.h
@@ -21,6 +21,7 @@
  * POWER_OFF   Stop OS and remove all power from system, if possible.
  * RESTART2    Restart system using given command string.
  * SW_SUSPEND  Suspend system using Software Suspend if compiled in
+ * KEXEC       Restart the system using a different kernel.
  */
 
 #define	LINUX_REBOOT_CMD_RESTART	0x01234567

@@ -30,6 +31,7 @@
 #define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
 #define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
 #define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
+#define LINUX_REBOOT_CMD_KEXEC		0x45584543
 
 
 #ifdef __KERNEL__

diff -uNr linux-2.5.69.hwfixes/kernel/Makefile linux-2.5.69.hwfixes-x86kexec/kernel/Makefile
@@ -17,6 +17,7 @@
 obj-$(CONFIG_CPU_FREQ) += cpufreq.o
 obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
 obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
+obj-$(CONFIG_KEXEC) += kexec.o
 obj-$(CONFIG_COMPAT) += compat.o
 
 ifneq ($(CONFIG_IA64),y)

diff -uNr linux-2.5.69.hwfixes/kernel/sys.c linux-2.5.69.hwfixes-x86kexec/kernel/sys.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/highuid.h>
 #include <linux/fs.h>
+#include <linux/kexec.h>
 #include <linux/workqueue.h>
 #include <linux/device.h>
 #include <linux/times.h>

@@ -207,6 +208,7 @@
 cond_syscall(sys_lookup_dcookie)
 cond_syscall(sys_swapon)
 cond_syscall(sys_swapoff)
+cond_syscall(sys_kexec_load)
 cond_syscall(sys_init_module)
 cond_syscall(sys_delete_module)
 cond_syscall(sys_socketpair)

@@ -439,6 +441,27 @@
 		machine_restart(buffer);
 		break;
 
+#ifdef CONFIG_KEXEC
+	case LINUX_REBOOT_CMD_KEXEC:
+	{
+		struct kimage *image;
+		if (arg) {
+			unlock_kernel();
+			return -EINVAL;
+		}
+		image = xchg(&kexec_image, 0);
+		if (!image) {
+			unlock_kernel();
+			return -EINVAL;
+		}
+		notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
+		system_running = 0;
+		device_shutdown();
+		printk(KERN_EMERG "Starting new kernel\n");
+		machine_kexec(image);
+		break;
+	}
+#endif
 #ifdef CONFIG_SOFTWARE_SUSPEND
 	case LINUX_REBOOT_CMD_SW_SUSPEND:
 		if (!software_suspend_enabled) {

Eric,

Good news: I have tried your patchset on a 2-way system, and kexec worked.

Mixed news: I didn't get any console output after the last printk in kexec ("Starting new kernel"), nor did I get any console output during the reboot. Other than that, the system rebooted fine and went multi-user (complete with graphical login and networking). Strange.

I've got two other systems to test this on, and I'll report when I have results. I have attached my .config and lspci output for the system I used.

I have also loaded your patch set into OSDL's on-line patch manager. The patch stack I used can be found here:

APIC changes:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1842

i8259 changes:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1843

reboot on BSP:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1844

hwfixes & x86kexec:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1845

For the lazy among us, I have also uploaded a combined patch for 2.5.69 that includes the four previous patches in one:
http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1846

Regards,
Andy

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_KEXEC=y

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI Support
#
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_SVWKS=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# I2C Hardware Sensors Mainboard support
#

#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_AMD_8151 is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
CONFIG_DRM_I830=y
CONFIG_DRM_MGA=y
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HANGCHECK_TIMER is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ICH=y
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support #

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y

00:00.0 Host bridge: Intel Corp. 82850 860 (Wombat) Chipset Host Bridge (MCH) (rev 04) 00:01.0 PCI bridge: Intel Corp. 82850/82860 850/860 (Tehama/Wombat) Chipset AGP Bridge (rev 04) 00:02.0 PCI bridge: Intel Corp. 82860 860 (Wombat) Chipset PCI Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 04)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 04) 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 85) 02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge (rev 03)
03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01) 04:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0c)

Very strange as nothing fundamental changed.

The only thing I did was inline use_mm into kexec piece. And to make the cpu shutdown code safe from an interrupt context.

And Andrew has it in 2.5.69-mm4 and is busy pestering me about compile errors. There needs to be an updated version where all of the appropriate functions have the noreturn attribute. Hopefully I can do a thorough job this weekend, and create some updated patches.

Eric

I'm like that.

I've dropped out a lot of the NORET stuff. It generates warnings on all other architectures, because their machine_restart, machine_halt and machine_power_off definitions don't have necessary attributes and don't have the while(1); at the end.

And I appreciate it. This was mostly an observation there was something reminding me to get back and fix the issue.

Yes there is a big const correctness type problem here.

First for machine_restart it is 100% correct. And at least sys_reboot assumes that machine_restart will not return, even before my patch.

And I don't know of a case where it makes sense for machine_halt and machine_power_off to return. Hence I deliberately made those cases the same. Especially as every real implementation I traced does not return. It is only the stupid cases like on x86 where we don't do anything that these routines actually return.

In the context of my patch stop_this_cpu needs to be marked noreturn. As long as the fundamental routines get marked I don't expect to see a lot of routines getting a while(1); I admit stop_apics also needs a while(1); but only because gcc cannot trace it.

And since this also generates warnings on other architectures it looks like someone (me) needs to go through the various architectures and add a bunch of noreturn attributes to the appropriate functions.

The basic question is for documenting and enforcing the noreturn dependency. Is it more of a help or a hindrance to use gcc noreturn tag?

And while I am pretty certain this is the correct thing to do I should break this out from the reboot_on_bsp patch. With the other architectures involved this is enough of a separate issue that a second set of patches is needed to maintain this cleanly.

Eric

It seems to be a significant hassle - it propagates all over the place and makes one curse. It's like retroconstification, as you say.

I'd be inclined to leave the function prototypes as-is and stick a commented while(1); in those places which actually need it, frankly.

Von Andy Pfiffer:

Same problem here, config attached.

Machine is a K6-233, 128 MB RAM, 440T(?)X board, Award BIOS.

Eike

CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MK6=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_PREEMPT=y
CONFIG_X86_TSC=y
CONFIG_NOHIGHMEM=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_KEXEC=y
CONFIG_PM=y
CONFIG_APM=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
CONFIG_HOTPLUG_PCI=m
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_HOOKS=y
CONFIG_IPV6=m
CONFIG_IPV6_SCTP__=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=m
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_BUSMOUSE=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ACCESS_FS=y
CONFIG_ACCESSFS_USER_PORTS=y
CONFIG_ACCESSFS_PROT_SOCK=1024
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_ENS1370=m
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_KALLSYMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_ZLIB_INFLATE=m
CONFIG_X86_BIOS_REBOOT=y