Skip to contentSkip to conversation

packet matching problem

DISCUSSION P.Srihari 2 participants 2 messages May 12, 2003

lore
Share & tools
lore

P.Srihari

author
#0 lore raw

hi,

i am facing what i think is a peculiar problem. i have a set of rules as follows

iptables -I FORWARD -p tcp --tcp-flags SYN,RST,ACK SYN -m limit --limit 1/s --limit-burst 1024 -j ACCEPT
iptables -A FORWARD -p tcp --tcp-flags SYN,RST,ACK SYN -j LOG --log-prefix "SYN ATTACK"
iptables -A FORWARD -p tcp --tcp-flags SYN,RST,ACK SYN -j DROP iptables -A FORWARD -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT

now i started an FTP session from the host to an FTP server. in this session, i turn off the prompt and do an mget * ( multiple files ). the files are in order of about 4 MB or so. as soon as the first file is completed, it prints the message SYN ATTACK - with the SRC port as ftp-data port (20) - no other traffic is coming into the firewall host. TCPDUMP on the firewall machine shows that about 8 or 9 SYN packets having been received by the firewall host.

now in the netfilter framework in 2.4.5 kernel, i found the following

a. for some strange reason, the packet-matching code in the kernel for limit is being invoked for even non-SYN packets and as the traffic to ftp data port flows into firewall, the credit associated with the entry for 1st rule in the above mentioned rule is getting reduced and finally the SYN attack is printed.

i am not saying that there is a bug in the netfilter code, but there could be something wrong in the rules that i have framed.

the above observations are accurate as i have done the test quite a few times.

the iptables version that i am using is 1.2.6a

can anyone suggest some solution

thanks
srihari

**************************Disclaimer************************************

Information contained in this E-MAIL being proprietary to Wipro Limited is 'privileged' and 'confidential' and intended for use only by the individual
or entity to which it is addressed. You are notified that any use, copying
or dissemination of the information contained in the E-MAIL in any manner whatsoever is strictly prohibited.

***************************************************************************

#1 lore raw

Hi,

Quoted 8 lines

iptables -I FORWARD -p tcp --tcp-flags SYN,RST,ACK SYN -m limit --limit 1/s --limit-burst 1024 -j ACCEPT
iptables -A FORWARD -p tcp --tcp-flags SYN,RST,ACK SYN -j LOG --log-prefix "SYN ATTACK"
iptables -A FORWARD -p tcp --tcp-flags SYN,RST,ACK SYN -j DROP iptables -A FORWARD -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT

I am not quiet sure about the seqence of the rules. Usaully, we place the "-m state --state RELATED,ESTABLISHED"( the connection tracking stuff) is in the top of the list of rules.... I guess instead of -A it should have been -I.. Read about connection tracking .. might help you.

Quoted 6 lines

now i started an FTP session from the host to an FTP server. in this
session, i turn off the prompt and do an mget * ( multiple files ).
the files are in order of about 4 MB or so. as soon as the first file
is completed, it prints the message SYN ATTACK - with the SRC port as
ftp-data port (20) - no other traffic is coming into the firewall host. TCPDUMP on the firewall machine shows that about 8 or 9 SYN packets having been received by the firewall host.

FTP is one of those peculiar protocols, Again, read about connection tracking. For the protocols like these the connection tracking modules have more work to do. However , this is not very relavent to your problem. The solution for your problem possilbly is the ordering of the rules, or the sequence.

There is a link from netfilter.org..(docs section).

Hope this helps ...

Narendra.

--------------------------
Narendra Prabhu. B
DeepRoot Linux Pvt Ltd.,Bangalore.
http://www.deeproot.co.in