FADT question

I think I found a bug in my FADT. Could someone eye this for sanity please. It sure looks wrong to me... Any suggestions for fix would be appreciated.

We see PM2_CNT_BLK as 0x803e. However according to my datasheet, I show this register at 0x8030. See the data below.

ACPI IO Registers: (ranged by 0x8000)
--------------------------------------
01h-00h PM1_STS
03h-02h PM1_EN
05h-04h PM1_CTL
07h-06h reserved
0Bh-08h PM1_TMR
0Fh-0Ch reserved
13h-10h P_CNTRL
14h P_LVL2
15h P_LVL3
17h-16h reserved
1Fh-18h GPE_STS0
27h-20h GPE_EN0
2Bh-28h reserved
2Ch GPE_CTL
2Eh-2Dh reserved
2Fh GT_CTL
30h PM2_CTL
3Bh-31h reserved
3Fh-3Ch AC_CTL

FADT dump:
---------------------------------------

Signature:        FACP
Length:           116
Revision:         0x01
Checksum:         0x52
OEMID:            TMETA
OEM Table ID:     PDB.ALI
OEM Revision:     0x06040003
Creator ID:       PTL
Creator Revision: 0x000f4240
FIRMWARE_CTRL:    0x06ffffc0
DSDT:             0x06ffcbf4
INT_MODEL:        0x00
SCI_INT:          9
SMI_CMD:          0x000000b1
ACPI_ENABLE:      0xf0
ACPI_DISABLE:     0xf1
S4BIOS_REQ:       0xf2
PM1a_EVT_BLK:     0x00008000
PM1b_EVT_BLK:     0x00000000
PM1a_CNT_BLK:     0x00008004
PM1b_CNT_BLK:     0x00000000
PM2_CNT_BLK:      0x0000803e
PM_TMR_BLK:       0x00008008
GPE0_BLK:         0x00008018
GPE1_BLK:         0x00000000
PM1_EVT_LEN:      4
PM1_CNT_LEN:      2
PM2_CNT_LEN:      1
PM_TM_LEN:        4
GPE0_BLK_LEN:     16
GPE1_BLK_LEN:     0
GPE1_BASE:        0
P_LVL2_LAT:       15
P_LVL3_LAT:       82
FLUSH_SIZE:       0
FLUSH_STRIDE:     0
DUTY_OFFSET:      1
DUTY_WIDTH:       3
DAY_ALRM:         0x0d
MON_ALRM:         0x00
CENTURY:          0x32
Flags:            0x00000125

Thanks in advance,
Matt

-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara The only event dedicated to issues related to Linux enterprise solutions www.enterpriselinuxforum.com