Skip to contentSkip to conversation

Patch to get ali5451 to work on the Sharp MM10

PATCH John Paul Lorenti 2 participants 3 messages May 18, 2003 – May 20, 2003

lore
Share & tools
lore
#0 lore raw

I have a Sharp MM10 laptop and it freezes when I try to load the ali5451 driver. After no solutions were found on alsa-user, I spent some time hacking the driver, and found that commenting out the spdif support stopped the freezing without losing any functionality. The laptop has no jacks to take advantage of spdif. Attached is a quick and dirty patch against alsa-driver-0.9.3a/alsa-kernel/pci/ali5451/ali5451.c from alsa-driver-0.9.3a.tar.bz2 which makes the driver run perfectly for me. Maybe one of the developers can clean it up and make some load time option out of it.

John Paul

ali5451_terse.c renamed from ali5451.c +36 -5
@@ -673,10 +673,11 @@
 
 	// recording
 	if (rec) {
-		if (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) & (1<<11) &&
+	 /*JPL SPDIF	if (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) & (1<<11) &&
 			( codec->revision == ALI_5451_V02 ))
 			idx = ALI_SPDIF_IN_CHANNEL;
 		else
+	 JPL SPDIF */		
 			idx = ALI_PCM_IN_CHANNEL;
 
 		if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0) {
@@ -688,6 +689,7 @@
 	}
 
 	//playback...
+        /* JPL SPDIF
 	if (inl(ALI_REG(codec, ALI_GLOBAL_CONTROL)) & (1<<15)) {
 		idx = ALI_SPDIF_OUT_CHANNEL;
 		if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0) {
@@ -696,7 +698,7 @@
 			snd_printk("ali_find_free_channel: S/PDIF out channel is in busy now.\n");
 		}
 	}
-
+	JPL SPDIF */
 	for (idx = 0; idx < ALI_CHANNELS; idx++) {
 		if ((result = snd_ali_alloc_pcm_channel(codec,idx)) >= 0)
 			return result;
@@ -748,6 +750,9 @@
 static void snd_ali_delay(ali_t *codec,int interval)
 {
 	unsigned long  begintimer,currenttimer;
+	printk("In snd_ali_delay\n");
+	/*
+
 
 	begintimer   = inl(ALI_REG(codec, ALI_STIMER));
 	currenttimer = inl(ALI_REG(codec, ALI_STIMER));
@@ -757,6 +762,7 @@
 			break;
 		currenttimer = inl(ALI_REG(codec,  ALI_STIMER));
 	}
+	*/
 }
 
 static void snd_ali_detect_spdif_rate(ali_t *codec)
@@ -764,6 +770,9 @@
 	u16 wval  = 0;
 	u16 count = 0;
 	u8  bval = 0, R1 = 0, R2 = 0;
+	printk("In snd_ali_detect_spdif_rate\n");
+	/*
+
 
 	bval  = inb(ALI_REG(codec,ALI_SPDIF_CTRL + 1));
 	bval |= 0x1F;
@@ -811,12 +820,15 @@
 		bval  = inb(ALI_REG(codec,ALI_SPDIF_CS +3)) & 0xF0;
 		outb(bval|0x03,ALI_REG(codec,ALI_SPDIF_CS + 3));
 	}
+	*/
 }
 
 static unsigned int snd_ali_get_spdif_in_rate(ali_t *codec)
 {
 	u32	dwRate = 0;
 	u8	bval = 0;
+	printk("In snd_ali_get_spdif_in_rate\n");
+	/*
 
 	bval  = inb(ALI_REG(codec,ALI_SPDIF_CTRL));
 	bval &= 0x7F;
@@ -827,7 +839,7 @@
 
 	bval  = inb(ALI_REG(codec,ALI_SPDIF_CS + 3));
 	bval &= 0x0F;
-
+	*/
 	if (bval == 0) dwRate = 44100;
 	if (bval == 1) dwRate = 48000;
 	if (bval == 2) dwRate = 32000;
@@ -838,6 +850,8 @@
 static void snd_ali_enable_spdif_in(ali_t *codec)
 {	
 	unsigned int dwVal;
+	printk("In snd_ali_enable_spdif_in\n");
+	/*
 
 	dwVal = inl(ALI_REG(codec, ALI_GLOBAL_CONTROL));
 	dwVal |= 1<<11;
@@ -848,6 +862,7 @@
 	outb(dwVal, ALI_REG(codec, ALI_SPDIF_CTRL));
 
 	snd_ali_enable_special_channel(codec, ALI_SPDIF_IN_CHANNEL);
+	*/
 }
 
 static void snd_ali_disable_spdif_in(ali_t *codec)
@@ -866,7 +881,8 @@
 {
 	unsigned char  bVal;
 	unsigned int  dwRate = 0;
-	
+		printk("In snd_ali_set_spdif_out_rate\n");
+	/*
 	if (rate == 32000) dwRate = 0x300;
 	if (rate == 44100) dwRate = 0;
 	if (rate == 48000) dwRate = 0x200;
@@ -881,6 +897,7 @@
 	bVal &= (~0x80);	//select left
 	outb(bVal, ALI_REG(codec, ALI_SPDIF_CTRL));
 	outw(rate | 0x10, ALI_REG(codec, ALI_SPDIF_CS + 2));
+	*/
 }
 
 static void snd_ali_enable_spdif_out(ali_t *codec)
@@ -1756,6 +1773,10 @@
 	unsigned long flags;
 	ali_t *codec = snd_magic_cast(ali_t, kcontrol->private_data, -ENXIO);
 	unsigned int enable;
+	printk("In snd_ali5451_spdif_get\n");
+	
+	/*
+
 
 	enable = ucontrol->value.integer.value[0] ? 1 : 0;
 
@@ -1775,12 +1796,18 @@
 	}
 	ucontrol->value.integer.value[0] = enable;
 	spin_unlock_irqrestore(&codec->reg_lock, flags);
+	*/	
 	return 0;
 }
 
 static int snd_ali5451_spdif_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol)
 {
 	unsigned long flags;
+	printk("In snd_ali5451_spdif_put\n");
+	return 0;
+	/*
+
+
 	ali_t *codec = snd_magic_cast(ali_t, kcontrol->private_data, -ENXIO);
 	unsigned int change = 0, enable = 0;
 
@@ -1834,6 +1861,7 @@
 	spin_unlock_irqrestore(&codec->reg_lock, flags);
 	
 	return change;
+	*/
 }
 
 static snd_kcontrol_new_t snd_ali5451_mixer_spdif[] __devinitdata = {
@@ -1867,12 +1895,14 @@
 		snd_printk("ali mixer creating error.\n");
 		return err;
 	}
+	/* JPL SPDIF
 	if (codec->revision == ALI_5451_V02) {
 		for(idx = 0; idx < ARRAY_SIZE(snd_ali5451_mixer_spdif); idx++) {
 			err=snd_ctl_add(codec->card, snd_ctl_new1(&snd_ali5451_mixer_spdif[idx], codec));
 			if (err < 0) return err;
 		}
 	}
+	*/
 	return 0;
 }
 
@@ -2039,11 +2069,12 @@
 
 	codec->ac97_ext_id = snd_ali_codec_peek(codec, 0, AC97_EXTENDED_ID);
 	codec->ac97_ext_status = snd_ali_codec_peek(codec, 0, AC97_EXTENDED_STATUS);
+	/* JPL SPDIF
 	if (codec->revision == ALI_5451_V02) {
 		snd_ali_enable_spdif_out(codec);
 		codec->spdif_mask = 0x00000002;
 	}
-
+	*/
 	snd_ali_printk("chip initialize succeed.\n");
 	return 0;
 
#1 lore raw

At Sun, 18 May 2003 06:53:57 -0400,

Quoted 11 lines · John Paul Lorenti

[1 <text/plain; ISO-8859-1 (7bit)>]
I have a Sharp MM10 laptop and it freezes when I try to load the ali5451 driver. After no solutions were found on alsa-user, I spent some time hacking the driver, and found that commenting out the spdif support stopped the freezing without losing any functionality. The laptop has no jacks to take advantage of spdif. Attached is a quick and dirty patch against alsa-driver-0.9.3a/alsa-kernel/pci/ali5451/ali5451.c from alsa-driver-0.9.3a.tar.bz2 which makes the driver run perfectly for me. Maybe one of the developers can clean it up and make some load time option out of it.

thanks, i added a new module option "spdif" for enabling/disabling the spdif support on this chip. as default, it's disabled.

please give a try cvs version.

ciao,

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software.
http://www.objectstore.net/sourceforge

#2 lore raw

I just compiled and tested the cvs version. Playback and record both work perfectly. Thanks, Takashi. That was a really fast turnaround time.

John Paul

Quoted 12 lines · Takashi Iwai

At Sun, 18 May 2003 06:53:57 -0400,

Quoted 4 lines · John Paul Lorenti

[1 <text/plain; ISO-8859-1 (7bit)>]
I have a Sharp MM10 laptop and it freezes when I try to load the ali5451 driver. After no solutions were found on alsa-user, I spent some time hacking the driver, and found that commenting out the spdif support stopped the freezing without losing any functionality. The laptop has no jacks to take advantage of spdif. Attached is a quick and dirty patch against alsa-driver-0.9.3a/alsa-kernel/pci/ali5451/ali5451.c from alsa-driver-0.9.3a.tar.bz2 which makes the driver run perfectly for me. Maybe one of the developers can clean it up and make some load time option out of it.

thanks, i added a new module option "spdif" for enabling/disabling the spdif support on this chip. as default, it's disabled.

Quoted 9 lines

please give a try cvs version.

ciao,

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge