Interrupt lost { .... }
Ello Freinds
I am facing this problem with kernel 2.4.21 any suggestion.
hdb: dma_timer_expiry: dma status == 0x64
hdb: lost interrupt
hdb: dma_intr: bad DMA status (dma_stat=70)
hdb: dma_intr: status=0x50 { DriveReady SeekComplete }
lspci -v | grep IDE
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80 [Master])
hdparm -I /dev/hdb/dev/hdb:
ATA device, with non-removable media
Model Number: ST340823A Serial Number: 7EF2AWX7 Firmware Revision: 3.11
Standards:
Supported: 5 4 3 2
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78165360
device size with M = 1024*1024: 38166 MBytes
device size with M = 1000*1000: 40020 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set Security Mode feature set
* SMART feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1
Checksum: correct
I am looking into this issue as my customer base who pays for fixes has raised the issue.
Cheers,
Andre Hedrick
LAD Storage Consulting Group
Quoted 71 lines · dacin
Ello Freinds
I am facing this problem with kernel 2.4.21 any suggestion.
hdb:
dma_timer_expiry: dma status ==0x64
hdb: lost interrupt
hdb:dma_intr: bad DMA status (dma_stat=70)
hdb:dma_intr: status=0x50 { DriveReady SeekComplete }lspci -v | grep IDE
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80 [Master])hdparm -I
/dev/hdb/dev/hdb:ATA device, with non-removable media
Model Number: ST340823A Serial Number: 7EF2AWX7 Firmware Revision: 3.11Standards:
Supported: 5 4 3 2
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 78165360
device size with M = 1024*1024: 38166 MBytes
device size with M = 1000*1000: 40020 MBytes (40 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1
Checksum: correct
Quoted 2 lines · Andre Hedrick
I am looking into this issue as my customer base who pays for fixes has raised the issue.
Turn off local APIC support, local APIC without SMP is broken in the base tree still