Ethernets on SCC2 and SCC3 on mpc8xx

Hello,

we want to use our custom board with MPC823e as
easy firewall in our applications. We have two 10Mbit ethernet on board connected to SCC2 and SCC3 channels.
Is it support in kernel
for using both SCC channels configured as ethernet (eth0, eth1 devices) simultaneously ? I use 2.4.3 kernel and there is only possibility to use SCC2 or SCC3
as ethernet, not both at the same time.

Thanks in advance, HANYS

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/