Skip to contentSkip to conversation

[Fwd: Re: via rhine network failure on 2.6.0-test4]

Fwd: Re: via rhine network failure on 2.6.0-test4 Steve French 2 participants 2 messages Aug 25, 2003 – Sep 8, 2003

lore
Share & tools
lore
#0 lore raw

Do dmidecode and acpidump have to be run while booted to the failing
kernel (2.6.0-test4)? If so I will need to rebuild test4 with ACPI on again tonight to get it to fail. Otherwise here is the output from dmidecode run on the same system while booted to 2.4. I will open a bug on bugzilla later today if I can track down my bugzilla id.

# dmidecode 2.2
SMBIOS 2.2 present.
36 structures occupying 961 bytes.
Table at 0x000F0800.
Handle 0x0000
   DMI type 0, 19 bytes.
   BIOS Information
       Vendor: Award Software International, Inc.
       Version: 6.00 PG
       Release Date: 11/13/2001
       Address: 0xE0000
       Runtime Size: 128 kB
       ROM Size: 256 kB
       Characteristics:
           ISA is supported
           PCI is supported
           PNP is supported
           APM is supported
           BIOS is upgradeable
           BIOS shadowing is allowed
           ESCD support is available
           Boot from CD is supported
           Selectable boot is supported
           BIOS ROM is socketed
           EDD is supported
           5.25"/360 KB floppy services are supported (int 13h)
           5.25"/1.2 MB floppy services are supported (int 13h)
           3.5"/720 KB floppy services are supported (int 13h)
           3.5"/2.88 MB floppy services are supported (int 13h)
           Print screen service is supported (int 5h)
           8042 keyboard services are supported (int 9h)
           Serial services are supported (int 14h)
           Printer services are supported (int 17h)
           CGA/mono video services are supported (int 10h)
           ACPI is supported
           USB legacy is supported
           AGP is supported
           LS-120 boot is supported
           ATAPI Zip drive boot is supported
Handle 0x0001
   DMI type 1, 25 bytes.
   System Information
       Manufacturer: VIA Technologies, Inc.
       Product Name: VT8366-8233
       Version: 
       Serial Number: 
       UUID: Not Present
       Wake-up Type: Power Switch
Handle 0x0002
   DMI type 2, 8 bytes.
   Base Board Information
       Manufacturer: 
       Product Name: VT8366-8233
       Version: 
       Serial Number: 
Handle 0x0003
   DMI type 3, 13 bytes.
   Chassis Information
       Manufacturer: 
       Type: Desktop
       Lock: Not Present
       Version: 
       Serial Number: 
       Asset Tag: 
       Boot-up State: Unknown
       Power Supply State: Unknown
       Thermal State: Unknown
       Security Status: Unknown
Handle 0x0004
   DMI type 4, 32 bytes.
   Processor Information
       Socket Designation: Socket A
       Type: Central Processor
       Family: Duron
       Manufacturer: AMD
       ID: 62 06 00 00 FF F9 83 03
       Signature: Type 0, Family 6, Model 6, Stepping 2
       Flags:
           FPU (Floating-point unit on-chip)
           VME (Virtual mode extension)
           DE (Debugging extension)
           PSE (Page size extension)
           TSC (Time stamp counter)
           MSR (Model specific registers)
           PAE (Physical address extension)
           MCE (Machine check exception)
           CX8 (CMPXCHG8 instruction supported)
           SEP (Fast system call)
           MTRR (Memory type range registers)
           PGE (Page global enable)
           MCA (Machine check architecture)
           CMOV (Conditional move instruction supported)
           PAT (Page attribute table)
           PSE-36 (36-bit page size extension)
           MMX (MMX technology supported)
           FXSR (Fast floating-point save and restore)
           SSE (Streaming SIMD extensions)
       Version: AMD Athlon(tm) XP
       Voltage: 3.3 V
       External Clock: 133 MHz
       Max Speed: 1500 MHz
       Current Speed: 1600 MHz
       Status: Populated, Enabled
       Upgrade: ZIF Socket
       L1 Cache Handle: 0x0009
       L2 Cache Handle: 0x000A
       L3 Cache Handle: No L3 Cache
Handle 0x0005
   DMI type 5, 22 bytes.
   Memory Controller Information
       Error Detecting Method: None
       Error Correcting Capabilities:
           None
       Supported Interleave: One-way Interleave
       Current Interleave: Four-way Interleave
       Maximum Memory Module Size: 32 MB
       Maximum Total Memory Size: 96 MB
       Supported Speeds:
           70 ns
           60 ns
       Supported Memory Types:
           Standard
           EDO
       Memory Module Voltage: 5.0 V
       Associated Memory Slots: 3
           0x0006
           0x0007
           0x0008
       Enabled Error Correcting Capabilities: None
Handle 0x0006
   DMI type 6, 12 bytes.
   Memory Module Information
       Socket Designation: A0
       Bank Connections: 0 1
       Current Speed: 60 ns
       Type: Unknown
       Installed Size: 512 MB (Double-bank Connection)
       Enabled Size: 512 MB (Double-bank Connection)
       Error Status: OK
Handle 0x0007
   DMI type 6, 12 bytes.
   Memory Module Information
       Socket Designation: A1
       Bank Connections: 2
       Current Speed: 60 ns
       Type: Unknown
       Installed Size: 512 MB (Single-bank Connection)
       Enabled Size: 512 MB (Single-bank Connection)
       Error Status: OK
Handle 0x0008
   DMI type 6, 12 bytes.
   Memory Module Information
       Socket Designation: A2
       Bank Connections: None
       Current Speed: 60 ns
       Type: Unknown
       Installed Size: Not Installed (Single-bank Connection)
       Enabled Size: Not Installed (Single-bank Connection)
       Error Status: OK
Handle 0x0009
   DMI type 7, 19 bytes.
   Cache Information
       Socket Designation: Internal Cache
       Configuration: Enabled, Not Socketed, Level 1
       Operational Mode: Write Back
       Location: Internal
       Installed Size: 128 KB
       Maximum Size: 128 KB
       Supported SRAM Types:
           Synchronous
       Installed SRAM Type: Synchronous
       Speed: Unknown
       Error Correction Type: Unknown
       System Type: Unknown
       Associativity: Unknown
Handle 0x000A
   DMI type 7, 19 bytes.
   Cache Information
       Socket Designation: External Cache
       Configuration: Enabled, Not Socketed, Level 2
       Operational Mode: Write Back
       Location: External
       Installed Size: 256 KB
       Maximum Size: 256 KB
       Supported SRAM Types:
           Synchronous
       Installed SRAM Type: Synchronous
       Speed: Unknown
       Error Correction Type: Unknown
       System Type: Unknown
       Associativity: Unknown
Handle 0x000B
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: PRIMARY IDE
       Internal Connector Type: On Board IDE
       External Reference Designator: 
       External Connector Type: None
       Port Type: Other
Handle 0x000C
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: SECONDARY IDE
       Internal Connector Type: On Board IDE
       External Reference Designator: 
       External Connector Type: None
       Port Type: Other
Handle 0x000D
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: FDD
       Internal Connector Type: On Board Floppy
       External Reference Designator: 
       External Connector Type: None
       Port Type: 8251 FIFO Compatible
Handle 0x000E
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: COM1
       Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
       External Reference Designator: 
       External Connector Type: DB-9 male
       Port Type: Serial Port 16450 Compatible
Handle 0x000F
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: COM2
       Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
       External Reference Designator: 
       External Connector Type: DB-9 male
       Port Type: Serial Port 16450 Compatible
Handle 0x0010
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: LPT1
       Internal Connector Type: DB-25 female
       External Reference Designator: 
       External Connector Type: DB-25 female
       Port Type: Parallel Port ECP/EPP
Handle 0x0011
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: Keyboard
       Internal Connector Type: PS/2
       External Reference Designator: 
       External Connector Type: PS/2
       Port Type: Keyboard Port
Handle 0x0012
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: PS/2 Mouse
       Internal Connector Type: PS/2
       External Reference Designator: 
       External Connector Type: PS/2
       Port Type: Mouse Port
Handle 0x0013
   DMI type 9, 13 bytes.
   System Slot Information
       Designation: PCI0
       Type: 32-bit PCI
       Current Usage: Available
       Length: Long
       ID: 1
       Characteristics:
           5.0 V is provided
           PME signal is supported
Handle 0x0014
   DMI type 9, 13 bytes.
   System Slot Information
       Designation: PCI1
       Type: 32-bit PCI
       Current Usage: Available
       Length: Long
       ID: 2
       Characteristics:
           5.0 V is provided
           PME signal is supported
Handle 0x0015
   DMI type 9, 13 bytes.
   System Slot Information
       Designation: PCI2
       Type: 32-bit PCI
       Current Usage: Available
       Length: Long
       ID: 3
       Characteristics:
           5.0 V is provided
           PME signal is supported
Handle 0x0016
   DMI type 9, 13 bytes.
   System Slot Information
       Designation: PCI3
       Type: 32-bit PCI
       Current Usage: Available
       Length: Long
       ID: 4
       Characteristics:
           5.0 V is provided
           PME signal is supported
Handle 0x0017
   DMI type 9, 13 bytes.
   System Slot Information
       Designation: AGP
       Type: 32-bit AGP
       Current Usage: Available
       Length: Long
       ID: 8
       Characteristics:
           5.0 V is provided
Handle 0x0018
   DMI type 8, 9 bytes.
   Port Connector Information
       Internal Reference Designator: USB
       Internal Connector Type: None
       External Reference Designator: 
       External Connector Type: Other
       Port Type: USB
Handle 0x0019
   DMI type 13, 22 bytes.
   BIOS Language Information
       Installable Languages: 3
           n|US|iso8859-1
           n|US|iso8859-1
           r|CA|iso8859-1
       Currently Installed Language: n|US|iso8859-1
Handle 0x001A
   DMI type 16, 15 bytes.
   Physical Memory Array
       Location: System Board Or Motherboard
       Use: System Memory
       Error Correction Type: None
       Maximum Capacity: 768 MB
       Error Information Handle: Not Provided
       Number Of Devices: 3
Handle 0x001B
   DMI type 17, 21 bytes.
   Memory Device
       Array Handle: 0x001A
       Error Information Handle: Not Provided
       Total Width: Unknown
       Data Width: Unknown
       Size: 512 MB
       Form Factor: DIMM
       Set: None
       Locator: A0
       Bank Locator: Bank0/1
       Type: Unknown
       Type Detail: None
Handle 0x001C
   DMI type 17, 21 bytes.
   Memory Device
       Array Handle: 0x001A
       Error Information Handle: Not Provided
       Total Width: Unknown
       Data Width: Unknown
       Size: 512 MB
       Form Factor: DIMM
       Set: None
       Locator: A1
       Bank Locator: Bank2/3
       Type: Unknown
       Type Detail: None
Handle 0x001D
   DMI type 17, 21 bytes.
   Memory Device
       Array Handle: 0x001A
       Error Information Handle: Not Provided
       Total Width: Unknown
       Data Width: Unknown
       Size: No Module Installed
       Form Factor: DIMM
       Set: None
       Locator: A2
       Bank Locator: Bank4/5
       Type: Unknown
       Type Detail: None
Handle 0x001E
   DMI type 19, 15 bytes.
   Memory Array Mapped Address
       Starting Address: 0x00000000000
       Ending Address: 0x0003FFFFFFF
       Range Size: 1 GB
       Physical Array Handle: 0x001A
       Partition Width: 0
Handle 0x001F
   DMI type 20, 19 bytes.
   Memory Device Mapped Address
       Starting Address: 0x00000000000
       Ending Address: 0x0001FFFFFFF
       Range Size: 512 MB
       Physical Device Handle: 0x001B
       Memory Array Mapped Address Handle: 0x001E
       Partition Row Position: 1
Handle 0x0020
   DMI type 20, 19 bytes.
   Memory Device Mapped Address
       Starting Address: 0x00020000000
       Ending Address: 0x0003FFFFFFF
       Range Size: 512 MB
       Physical Device Handle: 0x001C
       Memory Array Mapped Address Handle: 0x001E
       Partition Row Position: 1
Handle 0x0021
   DMI type 20, 19 bytes.
   Memory Device Mapped Address
       Starting Address: 0x00000000000
       Ending Address: 0x000000003FF
       Range Size: 1 kB
       Physical Device Handle: 0x001D
       Memory Array Mapped Address Handle: 0x001E
       Partition Row Position: 1
Handle 0x0022
   DMI type 32, 11 bytes.
   System Boot Information
       Status: No errors detected
Handle 0x0023
   DMI type 127, 4 bytes.
   End Of Table
Quoted 209 lines · Jun

Following info would be crucial when figuring out the problem. In this particular case, it looks like test4 attempted to enable wrong PCI interrupt links (i.e. LNKA and LNKD, the ones already enabled).

Thanks,
Jun
----

Please file a bug at http://bugzilla.kernel.org/
Category: Power Management
Componenet: ACPI

Attach the output from dmidecide, available in /usr/sbin/, or here: http://www.nongnu.org/dmidecode/

Attach the output from acpidmp, available in /usr/sbin/, or in here
http://www.intel.com/technology/iapc/acpi/downloads/pmtools-20010730.tar
.gz

Attach the dmesg output showing the failure, if possible.

Quoted 9 lines

-----Original Message-----
From: Steve French [mailto:[email protected]]
Sent: Sunday, August 24, 2003 9:33 PM
To: Jeff Garzik; [email protected]
Subject: Re: via rhine network failure on 2.6.0-test4

Looks like IRQ misassignment. Disabling ACPI on test4 got networking

to

Quoted 18 lines

work again and the IRQ assignment is back to IRQ11 for via rhine. The assigned interrupt in the failing case (linux-2.6.0-test4) was IRQ5 instead of 11 which presumably it should be - see contents of /proc/interrupts in the failing case (test4):

CPU0
0: 1013475 XT-PIC timer
1: 1309 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC eth0
9: 0 XT-PIC acpi
10: 0 XT-PIC uhci-hcd, uhci-hcd
12: 30047 XT-PIC i8042
14: 15193 XT-PIC ide0
15: 24 XT-PIC ide1
NMI: 0
ERR: 13

Quoted 6 lines

The excerpt from the good boot.msg (linux-2.6.0-test3) follows:

<6>ACPI: Subsystem revision 20030714
<4> tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully

acquired

Quoted 4 lines

<4>Parsing all Control

Methods:................................................................ ..

Quoted 4 lines

................
<4>Table [DSDT](id F004) - 326 Objects with 29 Devices 82 Methods 21 Regions
<4>ACPI Namespace successfully loaded at root c054f95c

Quoted 10 lines

<4>evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful <4>evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000004020 on int 9
<4>Completing Region/Field/Buffer/Package initialization:.............................................. <4>Initialized 21/21 Regions 0/0 Fields 15/15 Buffers 10/10 Packages (334 nodes)
<4>Executing all Device _STA and_INI

methods:..............................

Quoted 23 lines

<4>30 Devices found containing: 30 _STA, 1 _INI methods <6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <5>SCSI subsystem initialized
<6>Linux Kernel Card Services 3.1.22
<6> options: [pci] [pm]
<6>drivers/usb/core/usb.c: registered new driver usbfs <6>drivers/usb/core/usb.c: registered new driver hub <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 <6>PCI: Using ACPI for IRQ routing

Quoted 3 lines

The corresponding excerpt from the failing (linux-2.6.0-test4)

boot.msg

Quoted 33 lines

<6>ACPI: Subsystem revision 20030813
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>PM: Adding info for No Bus:pci0000:00
<7>PM: Adding info for pci:0000:00:00.0
<7>PM: Adding info for pci:0000:00:01.0
<7>PM: Adding info for pci:0000:00:0e.0
<7>PM: Adding info for pci:0000:00:11.0
<7>PM: Adding info for pci:0000:00:11.1
<7>PM: Adding info for pci:0000:00:11.2
<7>PM: Adding info for pci:0000:00:11.3
<7>PM: Adding info for pci:0000:00:12.0
<7>PM: Adding info for pci:0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <5>SCSI subsystem initialized
<6>drivers/usb/core/usb.c: registered new driver usbfs <6>drivers/usb/core/usb.c: registered new driver hub <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 <6>PCI: Using ACPI for IRQ routing

Quoted 11 lines
Quoted 7 lines · Jeff Garzik
Quoted 3 lines · Steve French

The via rhine driver fails to get a dhcp address on my test system

on

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

2.6.0-test4. ethereal shows no dhcp request leaving the box but ifconfig does show the device and it is detected in /proc/pci. Switching from the test3 vs. test4 snapshots built with equivalent configure options on the same system (SuSE 8.2) - test3 works but test4 does not. This is using essentially the default config for

both

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

the test3 and test4 cases - the only changes are SMP disabled, scsi devices disabled, Athlon, via-rhine enabled in network devices and

a

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

handful of additional filesystems enabled, debug memory allocations enabled. This is the first time in many months that I have seen problems with the via-rhine driver on 2.6

Analyzing the code differences between 2.6.0-test3 and test4 (in via-rhine.c) is not very promising since the only line that has changed (kfree to free_netdev) is in the routine

via_rhine_remove_one

Quoted 18 lines
Quoted 18 lines
Quoted 6 lines

that seems unlikely to cause problems sending data on the network.

Ideas as to what could have caused the regression?

Does /proc/interrupts show any interrupts being received on your eth device? Does dmesg report any irq assignment problems, or similar?

This sounds like ACPI or irq routing related.

Jeff

#1 lore raw

Hi!

Quoted 10 lines

Handle 0x0004
DMI type 4, 32 bytes.
Processor Information
Socket Designation: Socket A
Type: Central Processor
Family: Duron
Manufacturer: AMD
ID: 62 06 00 00 FF F9 83 03
Signature: Type 0, Family 6, Model 6, Stepping 2 Flags:

...

Quoted 5 lines

Version: AMD Athlon(tm) XP
Voltage: 3.3 V
External Clock: 133 MHz
Max Speed: 1500 MHz
Current Speed: 1600 MHz

Hmm, your cpu is running at 106% :-).

Pavel

Signature · 2 lines
				Pavel
Written on sharp zaurus, because my Velo1 broke. If you have Velo you don't need...