Weird problem with nforce2
Hi all,
I just bought a new motherboard, CPU and RAM. With the last computer everything worked fine under 2.4 and 2.6. Now it's not that way any more. I can run 2.4.22, but it's slow (All of 2.4 series kernel's I tested seem to be slow), then I hooked up 2.6.0-test4, booted, everything looked fine, but then when I tryed to install NVIDIA drivers, I get many errors about nv_kern_read_agpinfo, yes, I tested 2.6.0-test1-3 too, but when I boot the IRQ #19 get's some errors, but in 2.6.0-test4 no errors in boot, but I can't compile nvidia card drivers! This may be off-topic, but I think this is the best way for getting help. (Yes, I patched nvidia_kernel too, so it's not about that, and the same package worked on old computer really well, with the same graphic card). My chipset is NForce2, and needs NVIDIA NForce/NForce2 so the agp can work with full power. Thank you.
Quoted 1 line · Markus Hästbacka
My chipset is NForce2, and needs NVIDIA NForce/NForce2 so the agp can work with full power. Thank you.
This is not true; AGP works perfectly fine with the in-kernel drivers. You can set your video card to use the in-kernel AGP even if it is Nvidia, I think (use the NvAgp option in XF86Config).
If not, maybe the patch has not been updated for the latest kernels, and you will have to wait for someone to do so. In that case, this list is not the place to ask.
-Rahul
Signature · 3 lines
Rahul Karnik [email protected] http://www.genebrew.com/
Quoted 4 lines · Rahul Karnik
Quoted 2 lines · Markus Hästbacka
My chipset is NForce2, and needs NVIDIA NForce/NForce2 so the agp can work with full power. Thank you.
Quoted 8 lines
This is not true; AGP works perfectly fine with the in-kernel drivers. You can set your video card to use the in-kernel AGP even if it is Nvidia, I think (use the NvAgp option in XF86Config).
If not, maybe the patch has not been updated for the latest kernels, and you will have to wait for someone to do so. In that case, this list is not the place to ask.
The patch is fully up to date, I'm running 2.6.0-test4-mm1.
nForce2 AGPGART plus the binary NVIDIA drivers kills my box on startup. I just disabled AGPGART and used NVAGP provided with the drivers and I get working AGP 8x.
Anybody else with this?
Cheers,
Alistair.
Hello, I got it working now, thank you anyways. I got another problem straight ahead too.
My AGP works, but it's darn slow. I need it working probebly so I can use my linux again *sigh*.
I have a Nforce 2 chipset on my board. If I build Nforce2 support as a module or built in it causes a hang, and I need a hard reboot. I saw that if the module is loaded at startup it will cause a crash, but if I load it later, it wont affect the speed. So, it needs to be loaded in bootup, but it will cause a crash, you know something about this? When starting X it just crashes (And I can reproduce this without taining the kernel) so is Nforce2 support broken for my board?
Regards,
---
Markus Hästbacka <[email protected]>