Fs corruption with swsusp in test4-mm6 ?
Subsystems (2)
Hi,
I've tested the latest -mm6 kernel on a Compaq Presario 2157EA laptop (Celeron Mobile 2GHz)
Everything worked fine until I tested suspend to disk. After resuming, I've got random messages about reiserfs problem on the console :
vs-4080: reiserfs_free_block: free_block (hda2:95121)[dev:blocknr]: bit already cleared
Sep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 652 0x0 SD] (nlink == 1) not found (pos 25)
Please find in attachement 1 syslog showing the suspend / resume cycle and the fs errors.
Thanks,
Mathieu LESNIAK
Sep 6 10:29:16 herrbach syslogd 1.4.1#11: restart. Sep 6 10:29:16 herrbach kernel: klogd 1.4.1#11, log source = /proc/kmsg started. Sep 6 10:29:16 herrbach kernel: Inspecting /boot/System.map-2.6.0-test4-mm6 Sep 6 10:29:17 herrbach kernel: Loaded 26011 symbols from /boot/System.map-2.6.0-test4-mm6. Sep 6 10:29:17 herrbach kernel: Symbols match kernel version 2.6.0. Sep 6 10:29:17 herrbach kernel: No module symbols loaded - kernel modules not enabled. Sep 6 10:29:17 herrbach kernel: Linux version 2.6.0-test4-mm6 (root@athlon) (version gcc 3.3.2 20030831 (Debian prerelease)) #3 Sat Sep 6 10:17:01 CEST 2003 Sep 6 10:29:17 herrbach kernel: Video mode to be used for restore is 317 Sep 6 10:29:17 herrbach kernel: BIOS-provided physical RAM map: Sep 6 10:29:17 herrbach kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 0000000000100000 - 000000000bf70000 (usable) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 000000000bf70000 - 000000000bf7f000 (ACPI data) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 000000000bf7f000 - 000000000bf80000 (ACPI NVS) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 000000000bf80000 - 000000000c000000 (reserved) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) Sep 6 10:29:17 herrbach kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Sep 6 10:29:17 herrbach kernel: 191MB LOWMEM available. Sep 6 10:29:17 herrbach kernel: On node 0 totalpages: 49008 Sep 6 10:29:17 herrbach kernel: DMA zone: 4096 pages, LIFO batch:1 Sep 6 10:29:17 herrbach kernel: Normal zone: 44912 pages, LIFO batch:10 Sep 6 10:29:17 herrbach kernel: HighMem zone: 0 pages, LIFO batch:1 Sep 6 10:29:17 herrbach kernel: DMI 2.3 present. Sep 6 10:29:17 herrbach kernel: ACPI: RSDP (v000 PTLTD ) @ 0x000f6c90 Sep 6 10:29:17 herrbach kernel: ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0bf78eb1 Sep 6 10:29:17 herrbach kernel: ACPI: FADT (v001 ATI Salmon 0x06040000 ATI 0x000f4240) @ 0x0bf7ef64 Sep 6 10:29:17 herrbach kernel: ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0bf7efd8 Sep 6 10:29:17 herrbach kernel: ACPI: DSDT (v001 ATI MS2_1535 0x06040000 MSFT 0x0100000e) @ 0x00000000 Sep 6 10:29:17 herrbach kernel: Building zonelist for node : 0 Sep 6 10:29:17 herrbach kernel: Kernel command line: BOOT_IMAGE=Linux ro root=302 hdc=ide-scsi Sep 6 10:29:17 herrbach kernel: ide_setup: hdc=ide-scsi Sep 6 10:29:17 herrbach kernel: current: c03ba9c0 Sep 6 10:29:17 herrbach kernel: current->thread_info: c0436000 Sep 6 10:29:17 herrbach kernel: Initializing CPU#0 Sep 6 10:29:17 herrbach kernel: PID hash table entries: 1024 (order 10: 8192 bytes) Sep 6 10:29:17 herrbach kernel: Detected 1993.827 MHz processor. Sep 6 10:29:17 herrbach kernel: Console: colour dummy device 80x25 Sep 6 10:29:17 herrbach kernel: Memory: 189768k/196032k available (2382k kernel code, 5616k reserved, 905k data, 152k init, 0k highmem) Sep 6 10:29:17 herrbach kernel: zapping low mappings. Sep 6 10:29:17 herrbach kernel: Calibrating delay loop... 3932.16 BogoMIPS Sep 6 10:29:17 herrbach kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 6 10:29:17 herrbach kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Sep 6 10:29:17 herrbach kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Sep 6 10:29:17 herrbach kernel: -> /dev Sep 6 10:29:17 herrbach kernel: -> /dev/console Sep 6 10:29:17 herrbach kernel: -> /root Sep 6 10:29:17 herrbach kernel: CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 Sep 6 10:29:17 herrbach kernel: CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 Sep 6 10:29:17 herrbach kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Sep 6 10:29:17 herrbach kernel: CPU: L2 cache: 256K Sep 6 10:29:17 herrbach kernel: CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 Sep 6 10:29:17 herrbach kernel: Intel machine check architecture supported. Sep 6 10:29:17 herrbach kernel: Intel machine check reporting enabled on CPU#0. Sep 6 10:29:17 herrbach kernel: CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available Sep 6 10:29:17 herrbach kernel: CPU: Intel Mobile Intel(R) Celeron(R) CPU 2.00GHz stepping 07 Sep 6 10:29:17 herrbach kernel: Enabling fast FPU save and restore... done. Sep 6 10:29:17 herrbach kernel: Enabling unmasked SIMD FPU exception support... done. Sep 6 10:29:17 herrbach kernel: Checking 'hlt' instruction... OK. Sep 6 10:29:17 herrbach kernel: POSIX conformance testing by UNIFIX Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:legacy Sep 6 10:29:17 herrbach kernel: Initializing RT netlink socket Sep 6 10:29:17 herrbach kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2 Sep 6 10:29:17 herrbach kernel: PCI: Using configuration type 1 Sep 6 10:29:17 herrbach kernel: mtrr: v2.0 (20020519) Sep 6 10:29:17 herrbach kernel: ACPI: Subsystem revision 20030813 Sep 6 10:29:17 herrbach kernel: ACPI: Interpreter enabled Sep 6 10:29:17 herrbach kernel: ACPI: Using PIC for interrupt routing Sep 6 10:29:17 herrbach kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Sep 6 10:29:17 herrbach kernel: PCI: Probing PCI hardware (bus 00) Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:pci0000:00 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:00.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:01.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:02.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:06.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:07.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:08.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:0a.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:10.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:11.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:00:12.0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pci:0000:01:05.0 Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 10) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 10) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 10) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 10) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs *5) Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs *10) Sep 6 10:29:17 herrbach kernel: ACPI: Embedded Controller [EC0] (gpe 24) Sep 6 10:29:17 herrbach kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Sep 6 10:29:17 herrbach kernel: PnPBIOS: Scanning system for PnP BIOS support... Sep 6 10:29:17 herrbach kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00f6cc0 Sep 6 10:29:17 herrbach kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaff0, dseg 0x400 Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:pnp0 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:00 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:01 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:02 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:03 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:04 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:05 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:06 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:07 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:08 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:09 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:0a Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:0b Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:0c Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:0d Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:0f Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:10 Sep 6 10:29:17 herrbach kernel: PM: Adding info for pnp:00:13 Sep 6 10:29:17 herrbach kernel: PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver Sep 6 10:29:17 herrbach kernel: SCSI subsystem initialized Sep 6 10:29:17 herrbach kernel: drivers/usb/core/usb.c: registered new driver usbfs Sep 6 10:29:17 herrbach kernel: drivers/usb/core/usb.c: registered new driver hub Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10 Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5 Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 Sep 6 10:29:17 herrbach kernel: ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 Sep 6 10:29:17 herrbach kernel: ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 Sep 6 10:29:17 herrbach kernel: PCI: Using ACPI for IRQ routing Sep 6 10:29:17 herrbach kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Sep 6 10:29:17 herrbach kernel: vesafb: framebuffer at 0xd8000000, mapped to 0xcc80c000, size 16384k Sep 6 10:29:17 herrbach kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=41 Sep 6 10:29:17 herrbach kernel: vesafb: protected mode interface info at c000:51bf Sep 6 10:29:17 herrbach kernel: vesafb: scrolling: redraw Sep 6 10:29:17 herrbach kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Sep 6 10:29:17 herrbach kernel: fb0: VESA VGA frame buffer device Sep 6 10:29:17 herrbach kernel: Console: switching to colour frame buffer device 128x48 Sep 6 10:29:17 herrbach kernel: pty: 256 Unix98 ptys configured Sep 6 10:29:17 herrbach kernel: SBF: Simple Boot Flag extension found and enabled. Sep 6 10:29:17 herrbach kernel: SBF: Setting boot flags 0x1 Sep 6 10:29:17 herrbach kernel: Machine check exception polling timer started. Sep 6 10:29:17 herrbach kernel: powernow: AMD processor not detected. Sep 6 10:29:17 herrbach kernel: cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available Sep 6 10:29:17 herrbach kernel: cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. Sep 6 10:29:17 herrbach kernel: ikconfig 0.6 with /proc/config* Sep 6 10:29:17 herrbach kernel: Initializing Cryptographic API Sep 6 10:29:17 herrbach kernel: ACPI: AC Adapter [ACAD] (on-line) Sep 6 10:29:17 herrbach kernel: ACPI: Battery Slot [BAT1] (battery absent) Sep 6 10:29:17 herrbach kernel: ACPI: Power Button (FF) [PWRF] Sep 6 10:29:17 herrbach kernel: ACPI: Lid Switch [LID] Sep 6 10:29:17 herrbach kernel: ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) Sep 6 10:29:17 herrbach kernel: ACPI: Thermal Zone [THRM] (38 C) Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:pnp1 Sep 6 10:29:17 herrbach kernel: isapnp: Scanning for PnP cards... Sep 6 10:29:17 herrbach kernel: isapnp: No Plug & Play device found Sep 6 10:29:17 herrbach kernel: Real Time Clock Driver v1.12 Sep 6 10:29:17 herrbach kernel: [drm] Initialized radeon 1.9.0 20020828 on minor 0 Sep 6 10:29:17 herrbach kernel: Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled Sep 6 10:29:17 herrbach kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 6 10:29:17 herrbach kernel: PCI: Enabling device 0000:00:08.0 (0000 -> 0003) Sep 6 10:29:17 herrbach kernel: ttyS1 at I/O 0x1428 (irq = 10) is a 8250 Sep 6 10:29:17 herrbach kernel: ttyS2 at I/O 0x1440 (irq = 10) is a 8250 Sep 6 10:29:17 herrbach kernel: ttyS3 at I/O 0x1450 (irq = 10) is a 8250 Sep 6 10:29:17 herrbach kernel: Using anticipatory scheduling io scheduler Sep 6 10:29:17 herrbach kernel: floppy0: no floppy controllers found Sep 6 10:29:17 herrbach kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Sep 6 10:29:17 herrbach kernel: loop: loaded (max 8 devices) Sep 6 10:29:17 herrbach kernel: nbd: registered device at major 43 Sep 6 10:29:17 herrbach kernel: natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 Sep 6 10:29:17 herrbach kernel: originally by Donald Becker <[email protected]> Sep 6 10:29:17 herrbach kernel: http://www.scyld.com/network/natsemi.html Sep 6 10:29:17 herrbach kernel: 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder Sep 6 10:29:17 herrbach kernel: eth0: NatSemi DP8381[56] at 0xcd80f000, 00:0b:cd:a7:40:b4, IRQ 10. Sep 6 10:29:17 herrbach kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 6 10:29:17 herrbach kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 6 10:29:17 herrbach kernel: ALI15X3: IDE controller at PCI slot 0000:00:10.0 Sep 6 10:29:17 herrbach kernel: ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 Sep 6 10:29:17 herrbach kernel: ALI15X3: chipset revision 196 Sep 6 10:29:17 herrbach kernel: ALI15X3: not 100%% native mode: will probe irqs later Sep 6 10:29:17 herrbach kernel: ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio Sep 6 10:29:17 herrbach kernel: ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio Sep 6 10:29:17 herrbach kernel: hda: HITACHI_DK23EA-30, ATA DISK drive Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:ide0 Sep 6 10:29:17 herrbach kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 6 10:29:17 herrbach kernel: PM: Adding info for ide:0.0 Sep 6 10:29:17 herrbach kernel: hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:ide1 Sep 6 10:29:17 herrbach kernel: ide1 at 0x170-0x177,0x376 on irq 15 Sep 6 10:29:17 herrbach kernel: PM: Adding info for ide:1.0 Sep 6 10:29:17 herrbach kernel: hda: max request size: 128KiB Sep 6 10:29:17 herrbach kernel: hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(100) Sep 6 10:29:17 herrbach kernel: hda: hda1 hda2 hda3 Sep 6 10:29:17 herrbach kernel: Console: switching to colour frame buffer device 128x48 Sep 6 10:29:17 herrbach kernel: Initializing USB Mass Storage driver... Sep 6 10:29:17 herrbach kernel: drivers/usb/core/usb.c: registered new driver usb-storage Sep 6 10:29:17 herrbach kernel: USB Mass Storage support registered. Sep 6 10:29:17 herrbach kernel: drivers/usb/core/usb.c: registered new driver hiddev Sep 6 10:29:17 herrbach kernel: drivers/usb/core/usb.c: registered new driver hid Sep 6 10:29:17 herrbach kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Sep 6 10:29:17 herrbach kernel: mice: PS/2 mouse device common for all mice Sep 6 10:29:17 herrbach kernel: Synaptics Touchpad, model: 1 Sep 6 10:29:17 herrbach kernel: Firmware: 5.8 Sep 6 10:29:17 herrbach kernel: Sensor: 35 Sep 6 10:29:17 herrbach kernel: new absolute packet format Sep 6 10:29:17 herrbach kernel: Touchpad has extended capability bits Sep 6 10:29:17 herrbach kernel: -> multifinger detection Sep 6 10:29:17 herrbach kernel: -> palm detection Sep 6 10:29:17 herrbach kernel: input: Synaptics Synaptics TouchPad on isa0060/serio1 Sep 6 10:29:17 herrbach kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 6 10:29:17 herrbach kernel: input: AT Set 2 keyboard on isa0060/serio0 Sep 6 10:29:17 herrbach kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 6 10:29:17 herrbach kernel: Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC). Sep 6 10:29:17 herrbach kernel: ALSA device list: Sep 6 10:29:17 herrbach kernel: No soundcards found. Sep 6 10:29:17 herrbach kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Sep 6 10:29:17 herrbach kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes Sep 6 10:29:17 herrbach kernel: TCP: Hash tables configured (established 16384 bind 32768) Sep 6 10:29:17 herrbach kernel: Linux IP multicast router 0.06 plus PIM-SM Sep 6 10:29:17 herrbach kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Sep 6 10:29:17 herrbach kernel: cpufreq: No CPUs supporting ACPI performance management found. Sep 6 10:29:17 herrbach kernel: BIOS EDD facility v0.09 2003-Jan-22, 1 devices found Sep 6 10:29:17 herrbach kernel: PM: Reading swsusp image. Sep 6 10:29:17 herrbach kernel: PM: Resume from disk failed. Sep 6 10:29:17 herrbach kernel: ACPI: (supports S0 S3 S4 S5) Sep 6 10:29:17 herrbach kernel: found reiserfs format "3.6" with standard journal Sep 6 10:29:17 herrbach kernel: Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Sep 6 10:29:17 herrbach kernel: reiserfs: checking transaction log (hda2) for (hda2) Sep 6 10:29:17 herrbach kernel: Using r5 hash to sort names Sep 6 10:29:17 herrbach kernel: VFS: Mounted root (reiserfs filesystem) readonly. Sep 6 10:29:17 herrbach kernel: Freeing unused kernel memory: 152k freed Sep 6 10:29:17 herrbach kernel: Adding 200804k swap on /dev/hda3. Priority:-1 extents:1 Sep 6 10:29:17 herrbach kernel: ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Sep 6 10:29:17 herrbach kernel: ohci-hcd: block sizes: ed 64 td 64 Sep 6 10:29:17 herrbach kernel: ohci-hcd 0000:00:02.0: OHCI Host Controller Sep 6 10:29:17 herrbach kernel: ohci-hcd 0000:00:02.0: irq 10, pci mem cd8db000 Sep 6 10:29:17 herrbach kernel: ohci-hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 Sep 6 10:29:17 herrbach kernel: PM: Adding info for usb:usb1 Sep 6 10:29:17 herrbach kernel: PM: Adding info for usb:1-0:0 Sep 6 10:29:17 herrbach kernel: hub 1-0:0: USB hub found Sep 6 10:29:17 herrbach kernel: hub 1-0:0: 4 ports detected Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:ide-scsi Sep 6 10:29:17 herrbach kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Sep 6 10:29:17 herrbach kernel: PM: Adding info for No Bus:host0 Sep 6 10:29:17 herrbach kernel: Vendor: HL-DT-ST Model: RW/DVD GCC-4241N Rev: 0C27 Sep 6 10:29:17 herrbach kernel: Type: CD-ROM ANSI SCSI revision: 02 Sep 6 10:29:17 herrbach kernel: PM: Adding info for scsi:0:0:0:0 Sep 6 10:29:17 herrbach kernel: PCI: Enabling device 0000:00:06.0 (0005 -> 0007) Sep 6 10:29:17 herrbach modprobe: FATAL: Module snd_card_1 not found. Sep 6 10:29:17 herrbach modprobe: FATAL: Module snd_card_1 not found. Sep 6 10:29:17 herrbach modprobe: FATAL: Module snd_card_2 not found. Sep 6 10:29:17 herrbach modprobe: FATAL: Module snd_card_2 not found. Sep 6 10:29:17 herrbach modprobe: FATAL: Module snd_card_3 not found. Sep 6 10:29:17 herrbach modprobe: FATAL: Module snd_card_3 not found. Sep 6 10:29:18 herrbach kernel: eth0: link up. Sep 6 10:29:18 herrbach kernel: eth0: Setting full-duplex based on negotiated link capability. Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: Using interface eth0/00:0B:CD:A7:40:B4 with driver <natsemi> (version: 1.07+LK1.0.17) Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: Using detection mode: SIOCETHTOOL Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: ifplugd 0.15 successfully initialized, link beat detected. Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Sep 6 10:29:18 herrbach dhclient: Internet Software Consortium DHCP Client 2.0pl5 Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: client: Internet Software Consortium DHCP Client 2.0pl5 Sep 6 10:29:18 herrbach dhclient: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: client: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. Sep 6 10:29:18 herrbach dhclient: All rights reserved. Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: client: All rights reserved. Sep 6 10:29:18 herrbach dhclient: Sep 6 10:29:18 herrbach dhclient: Please contribute if you find this software useful. Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: client: Please contribute if you find this software useful. Sep 6 10:29:18 herrbach dhclient: For info, please visit http://www.isc.org/dhcp-contrib.html Sep 6 10:29:18 herrbach ifplugd(eth0)[248]: client: For info, please visit http://www.isc.org/dhcp-contrib.html Sep 6 10:29:18 herrbach dhclient: Sep 6 10:29:19 herrbach dhclient: Listening on LPF/eth0/00:0b:cd:a7:40:b4 Sep 6 10:29:19 herrbach dhclient: Sending on LPF/eth0/00:0b:cd:a7:40:b4 Sep 6 10:29:19 herrbach dhclient: Sending on Socket/fallback/fallback-net Sep 6 10:29:19 herrbach dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: client: Listening on LPF/eth0/00:0b:cd:a7:40:b4 Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: client: Sending on LPF/eth0/00:0b:cd:a7:40:b4 Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: client: Sending on Socket/fallback/fallback-net Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: client: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Sep 6 10:29:19 herrbach dhclient: DHCPACK from 192.168.100.1 Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: client: DHCPACK from 192.168.100.1 Sep 6 10:29:19 herrbach dhclient: bound to 192.168.100.8 -- renewal in 900 seconds. Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: client: bound to 192.168.100.8 -- renewal in 900 seconds. Sep 6 10:29:19 herrbach ifplugd(eth0)[248]: Program executed successfully. Sep 6 10:29:20 herrbach /usr/sbin/cron[285]: (CRON) INFO (pidfile fd = 3) Sep 6 10:29:20 herrbach /usr/sbin/cron[286]: (CRON) STARTUP (fork ok) Sep 6 10:29:20 herrbach /usr/sbin/cron[286]: (CRON) INFO (Running @reboot jobs) Sep 6 10:29:23 herrbach kernel: Losing too many ticks! Sep 6 10:29:23 herrbach kernel: TSC cannot be used as a timesource. (Are you running with SpeedStep?) Sep 6 10:29:23 herrbach kernel: Falling back to a sane timesource. Sep 6 10:30:42 herrbach kernel: Stopping tasks: ====================| Sep 6 10:30:43 herrbach kernel: Freeing memory: ....| Sep 6 10:30:43 herrbach kernel: hdc: start_power_step(step: 0) Sep 6 10:30:43 herrbach kernel: hdc: completing PM request, suspend Sep 6 10:30:43 herrbach kernel: hda: start_power_step(step: 0) Sep 6 10:30:43 herrbach kernel: hda: start_power_step(step: 1) Sep 6 10:30:43 herrbach kernel: hda: complete_power_step(step: 1, stat: 50, err: 0) Sep 6 10:30:43 herrbach kernel: hda: completing PM request, suspend Sep 6 10:30:43 herrbach kernel: eth0: remaining active for wake-on-lan Sep 6 10:30:43 herrbach kernel: PM: Attempting to suspend to disk. Sep 6 10:30:43 herrbach kernel: PM: snapshotting memory. Sep 6 10:30:43 herrbach kernel: resume= option should be used to set suspend device/critical section: Counting pages to copy[nosave c0434000] (pages needed: 3692+512=4204 free: 45315) Sep 6 10:30:43 herrbach kernel: Alloc pagedir Sep 6 10:30:43 herrbach kernel: [nosave c0434000]<7>PM: Image restored successfully. Sep 6 10:30:43 herrbach kernel: Freeing prev allocated pagedir Sep 6 10:30:43 herrbach kernel: PCI: Enabling device 0000:00:06.0 (0005 -> 0007) Sep 6 10:30:43 herrbach kernel: eth0: Setting full-duplex based on negotiated link capability. Sep 6 10:30:43 herrbach kernel: hda: Wakeup request inited, waiting for !BSY... Sep 6 10:30:43 herrbach kernel: hda: start_power_step(step: 1000) Sep 6 10:30:43 herrbach kernel: blk: queue c12d6c00, I/O limit 4095Mb (mask 0xffffffff) Sep 6 10:30:43 herrbach kernel: hda: completing PM request, resume Sep 6 10:30:43 herrbach kernel: hdc: Wakeup request inited, waiting for !BSY... Sep 6 10:30:43 herrbach kernel: hdc: start_power_step(step: 1000) Sep 6 10:30:43 herrbach kernel: hdc: completing PM request, resume Sep 6 10:30:43 herrbach kernel: Restarting tasks... done Sep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95121)[dev:blocknr]: bit already cleared Sep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 652 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:31:17 herrbach last message repeated 9 times Sep 6 10:31:21 herrbach shutdown[337]: shutting down for sy
Hi!
Quoted 12 lines
I've tested the latest -mm6 kernel on a Compaq Presario 2157EA laptop (Celeron Mobile 2GHz)
Everything worked fine until I tested suspend to disk. After resuming, I've got random messages about reiserfs problem on the console :vs-4080:
reiserfs_free_block:free_block(hda2:95121)[dev:blocknr]: bit already clearedSep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data
Quoted 4 lines
of object [689 652
0x0SD] (nlink == 1) not found (pos 25)Please find in attachement 1 syslog showing the suspend / resume cycle and the fs errors.
Be sure to reboot then run reiserfsck.
OHCI lacks suspend/resume support. Turn it off. ... ... but it should not do this kind of corruption. Can you reproduce this without OHCI? Can you try -test3?
Pavel
Signature · 2 lines
Horseback riding is like software... ...vgf orggre jura vgf serr.
Hi,
Quoted 15 lines · Pavel Machek
Hi!
Quoted 9 lines
I've tested the latest -mm6 kernel on a Compaq Presario 2157EA laptop (Celeron Mobile 2GHz)
Everything worked fine until I tested suspend to disk. After resuming, I've got random messages about reiserfs problem on the console :vs-4080:
reiserfs_free_block:free_block(hda2:95121)[dev:blocknr]: bit already clearedSep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 652 0x0 SD] (nlink == 1) not found (pos 25)Please find in attachement 1 syslog showing the suspend / resume cycle and the fs errors.
Quoted 7 lines
Be sure to reboot then run reiserfsck.
OHCI lacks suspend/resume support. Turn it off. ... ... but it should not do this kind of corruption. Can you reproduce this without OHCI? Can you try -test3?
Pavel
When I tested -test3 a few week ago, I hadn't got this problem.
Mathieu LESNIAK
Hi!
Quoted 18 lines
Quoted 18 lines
Quoted 16 lines
I've tested the latest -mm6 kernel on a Compaq Presario 2157EA laptop (Celeron Mobile 2GHz)
Everything worked fine until I tested suspend to disk. After resuming, I've got random messages about reiserfs problem on the console :vs-4080:
reiserfs_free_block:free_block(hda2:95121)[dev:blocknr]: bit already clearedSep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat dataof object [689 652
0x0SD] (nlink == 1) not found (pos 25)Please find in attachement 1 syslog showing the suspend / resume cycle and the fs errors.
Quoted 7 lines
Quoted 5 lines
Be sure to reboot then run reiserfsck.
OHCI lacks suspend/resume support. Turn it off. ... ... but it should not do this kind of corruption. Can you reproduce this without OHCI? Can you try -test3?
When I tested -test3 a few week ago, I hadn't got this problem.
Okay, try this patch, then invoke swsusp with this:
root@bug:~# cat swsusp.c
void
main(void)
{
reboot(0xD000FCE2, 0);
}
root@bug:~#If it helps, it is patrick's swsusp changes, else it is patrick's driver model changes or some driver bug.
Pavel
kernel/power/main.c +5 -68
@@ -172,31 +172,10 @@static int pm_suspend_disk (void ) { -int error; -pr_debug ("PM: Attempting to suspend to disk.\n" );if (pm_disk_mode ==PM_DISK_FIRMWARE )return pm_ops->enter (PM_SUSPEND_DISK ); - -if (!have_swsusp) -return -EPERM ; - -pr_debug ("PM: snapshotting memory.\n" ); - in_suspend =1 ; -if ((error =swsusp_save ())) - goto Done; - -if (in_suspend) { -pr_debug ("PM: writing image.\n" ); - error =swsusp_write (); -if (!error) - error =power_down (pm_disk_mode); -pr_debug ("PM: Power down failed.\n" ); - }else -pr_debug ("PM: Image restored successfully.\n" ); -swsusp_free (); - Done: -return error; +return 0 ; }
@@ -329,59 +308,17 @@int pm_suspend (u32 state) { +if ((state ==PM_SUSPEND_DISK ) && (pm_disk_mode !=PM_DISK_FIRMWARE )) { +software_suspend (); +return 0 ; + }if (state >PM_SUSPEND_ON && state <PM_SUSPEND_MAX )return enter_state (state);return -EINVAL ; } - -/** -* pm_resume - Resume from a saved image. -* -* Called as a late_initcall (so all devices are discovered and -* initialized), we call swsusp to see if we have a saved image or not. -* If so, we quiesce devices, the restore the saved image. We will -* return above (in pm_suspend_disk() ) if everything goes well. -* Otherwise, we fail gracefully and return to the normally -* scheduled program. -* -*/ - -static int pm_resume (void ) -{ -int error; - -if (!have_swsusp) -return 0 ; - -pr_debug ("PM: Reading swsusp image.\n" ); - -if ((error =swsusp_read ())) - goto Done; - -pr_debug ("PM: Preparing system for restore.\n" ); - -if ((error =suspend_prepare (PM_SUSPEND_DISK ))) - goto Free; - -pr_debug ("PM: Restoring saved image.\n" ); -swsusp_restore (); - -pr_debug ("PM: Restore failed, recovering.n" ); -suspend_finish (PM_SUSPEND_DISK ); - Free: -swsusp_free (); - Done: -pr_debug ("PM: Resume from disk failed.\n" ); -return 0 ; -} - -late_initcall (pm_resume); - -decl_subsys (power,NULL ,NULL ); -#define power_attr (_name) \ static struct subsys_attribute _name##_attr = { \ .attr = { \
kernel/power/swsusp.c +322 -109
610 lines not on this page · raw message
include/linux/suspend.h +37 -2
@@ -8,7 +8,11 @@#include <linux/notifier.h> #include <linux/config.h> #include <linux/init.h> -#include <linux/pm.h> + +extern unsigned char software_suspend_enabled; + +#define NORESUME 1 +#define RESUME_SPECIFIED 2#ifdef CONFIG_SOFTWARE_SUSPEND /* page backup entry */
@@ -45,30 +49,61 @@/* mm/page_alloc.c */ extern void drain_local_pages (void ); +/* kernel/suspend.c */ +extern void software_suspend (void ); +extern void software_resume (void ); + +extern int register_suspend_notifier (struct notifier_block *); +extern int unregister_suspend_notifier (struct notifier_block *); + extern unsigned int nr_copy_pages __nosavedata; extern suspend_pagedir_t *pagedir_nosave __nosavedata; +/* Communication between kernel/suspend.c and arch/i386/suspend.c */ + +extern void do_magic_resume_1 (void ); +extern void do_magic_resume_2 (void ); +extern void do_magic_suspend_1 (void ); +extern void do_magic_suspend_2 (void ); +/* Communication between acpi and arch/i386/suspend.c */ extern void do_suspend_lowlevel (int resume);extern void do_suspend_lowlevel_s4bios (int resume);#else /* CONFIG_SOFTWARE_SUSPEND */ -static inline int software_suspend (void ) +static inline void software_suspend (void ) { +printk ("Warning: fake suspend called\n" );return -EPERM ; } +#define software_resume () do { } while(0) +#define register_suspend_notifier (a) do { } while(0) +#define unregister_suspend_notifier (a) do { } while(0)#endif /* CONFIG_SOFTWARE_SUSPEND */ #ifdef CONFIG_PM extern void refrigerator (unsigned long ); +extern int freeze_processes (void ); +extern void thaw_processes (void ); + +extern int pm_prepare_console (void ); +extern void pm_restore_console (void );#else static inline void refrigerator (unsigned long flag) { } +static inline int freeze_processes (void ) +{ +return 0 ; +} +static inline void thaw_processes (void ) +{ + +}#endif /* CONFIG_PM */ #endif /* _LINUX_SWSUSP_H */
kernel/sys.c +5 -2
@@ -456,8 +456,11 @@#ifdef CONFIG_SOFTWARE_SUSPEND case LINUX_REBOOT_CMD_SW_SUSPEND : -if (!pm_suspend (PM_SUSPEND_DISK )) -break ; +if (!software_suspend_enabled) { +unlock_kernel (); +return -EAGAIN ; + } +software_suspend ();do_exit (0 );break ;#endif
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 5 lines
I've tested the latest -mm6 kernel on a Compaq Presario 2157EA laptop (Celeron Mobile 2GHz)
Everything worked fine until I tested suspend to disk. After resuming, I've got random messages about reiserfs problem on the console :
Definitely not good.
Quoted 8 lines
vs-4080:
reiserfs_free_block:free_block(hda2:95121)[dev:blocknr]: bit already clearedSep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat dataof object [689 652
0x0SD] (nlink == 1) not found (pos 25)
Could someone that is familar with reiserfs comment as to what exactly is happening?
Mathieu, did you notice this with any of the earlier -test4-mm6 kernels, or just -mm6?
Thanks,
Pat
Quoted 6 lines · Patrick Mochel
Quoted 4 lines
vs-4080:
reiserfs_free_block:free_block(hda2:95121)[dev:blocknr]: bit already clearedSep 6 10:30:51 herrbach kernel: vs-4080: reiserfs_free_block: free_block (hda2:95122)[dev:blocknr]: bit already cleared Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 645 0x0 SD] (nlink == 1) not found (pos 25) Sep 6 10:30:58 herrbach kernel: vs-13060: reiserfs_update_sd: stat data of object [689 652 0x0 SD] (nlink == 1) not found (pos 25)
Quoted 9 lines
Could someone that is familar with reiserfs comment as to what exactly is happening?
Mathieu, did you notice this with any of the earlier -test4-mm6 kernels, or just -mm6?
Thanks,
Pat
Hi,
I haven't tested previous -test4-mm patches before this one, so I couldn't tell you :(
In addition, as I said to Pavel in private mail, this laptop is not mine, and I won't be able to execute more tests on it.
Mathieu LESNIAK
Quoted 5 lines
I haven't tested previous -test4-mm patches before this one, so I couldn't tell you :(
In addition, as I said to Pavel in private mail, this laptop is not mine, and I won't be able to execute more tests on it.
Ah. I'm sorry to hear that. Thanks for testing anyway.
If someone has tested suspend-to-disk while using reiserfs, I would be very interested to hear if they have or have not had success.. (For the record, I use ext3 and have not seen any comparable problems).
Thanks,
Pat