Skip to contentSkip to conversation

Timer Interrupts, please CC [email protected]

DISCUSSION Kendrick Hamilton 2 participants 2 messages Sep 8, 2003 – Sep 9, 2003

lore
Share & tools
lore
#0 lore raw

Hello,
Please send/cc responses to [email protected]
We are using a custom modulator card with the Linux 2.2.16 kernel
running on an IBM e-server (dual 2.8GHz, a lot of RAM). The modulator card uses interrupts to send data (the card has a large FIFO and interrupts when almost empty). The interrupt service routine re-fills the fifo. While it is re-filling the FIFO interrupts are disabled. We are noticing horrible clock skew.
Can you tell me the frequency of timer interrupts used by the linux
2.2.16 kernel on Intel x86 SMP platform. I want to know how long my interrupt service routine can leave the interrupt disabled.
TIA
Kendrick Hamilton
[email protected]

#1 lore raw
Quoted 6 lines · Kendrick Hamilton

Hello,
Please send/cc responses to [email protected]
We are using a custom modulator card with the Linux 2.2.16 kernel
running on an IBM e-server (dual 2.8GHz, a lot of RAM). The modulator card uses interrupts to send data (the card has a large FIFO and interrupts when almost empty). The interrupt service routine re-fills the fifo. While it is re-filling the FIFO interrupts are disabled. We are noticing horrible clock skew.
Can you tell me the frequency of timer interrupts used by the linux
2.2.16 kernel on Intel x86 SMP platform. I want to know how long my interrupt service routine can leave the interrupt disabled.

Two VERY different questions IMNSHO. :)

The normal tick time for the x86 platform on 2.4.x kernels was/is 10ms. The interrupt latency, on the other hand, is usually well under 1ms. Shame to see that go up.

Signature · 3 lines
George Anzinger   [email protected]
High-res-timers:  http://sourceforge.net/projects/high-res-timers/
Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml