Skip to contentSkip to conversation

2.6.0-test5-mm3 VFAT File system problem

DISCUSSION gaxt 2 participants 3 messages Sep 20, 2003 – Sep 22, 2003

lore
Share & tools
lore

gaxt

author
#0 lore raw

Upon moving from -mm2 to -mm3, my vfat filesystems did not automatically bount at bootup as per the fstab and could not be accessed by applications in Gnome ie. my mount point showed no subdirectories or files.

I could manually mount (not by mount /mnt/win_c but by the full mount -t vfat /dev/hda1 /mnt/win_c) and I could explore using ls in terminals but programs in Gnome could not open the filesystem.

Upon rebooting into -mm2 everything was fine again.

#1 lore raw

On Sat, 20 Sep 2003 09:21:01 -0400 gaxt <[email protected]> wrote:

| Upon moving from -mm2 to -mm3, my vfat filesystems did not automatically 
| bount at bootup as per the fstab and could not be accessed by 
| applications in Gnome ie. my mount point showed no subdirectories or files.
| 
| I could manually mount (not by mount /mnt/win_c but by the full mount -t 
| vfat /dev/hda1 /mnt/win_c) and I could explore using ls in terminals but 
| programs in Gnome could not open the filesystem.
| 
| Upon rebooting into -mm2 everything was fine again.

Please post your /etc/fstab file.

Thanks,
--
~Randy

author
#2 lore raw
Quoted 6 lines · Randy.Dunlap

On Sat, 20 Sep 2003 09:21:01 -0400 gaxt <[email protected]> wrote:

| Upon moving from -mm2 to -mm3, my vfat filesystems did not automatically | bount at bootup as per the fstab and could not be accessed by | applications in Gnome ie. my mount point showed no subdirectories or files.
| | I could manually mount (not by mount /mnt/win_c but by the full mount -t | vfat /dev/hda1 /mnt/win_c) and I could explore using ls in terminals but | programs in Gnome could not open the filesystem.
| | Upon rebooting into -mm2 everything was fine again.
Quoted 6 lines

Please post your /etc/fstab file.

Thanks,
--
~Randy

# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.10 2002/11/18 19:39:22 azarah Exp $ #

# noatime turns of atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency).  It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.

# <fs> <mountpoint> <type> <opts>

        <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hdb2 /boot ext2 noauto,noatime

        1 1
/dev/hdb4               /               reiserfs        noatime,notail 
        0 0
/dev/hda2               /home           reiserfs        noatime,notail 
        0 0
/dev/hdb3               none            swap            sw 
        0 0
/dev/cdroms/cdrom0      /mnt/cdrom      iso9660         noauto,ro 
        0 0
/dev/cdroms/cdrom1      /mnt/cdrom1     iso9660         noauto,ro 
        0 0
#/dev/sr0               /mnt/cdrom      iso9660         noauto,ro 
        0 0
#/dev/sr1               /mnt/cdrom1     iso9660         noauto,ro 
        0 0

#proc /proc proc defaults

        0 0
none                    /proc           proc            defaults 
        0 0

/dev/fd0 /mnt/floppy msdos noauto,users,umask=000 0 0

# Windows Drives

/dev/hda1               /mnt/win_c      vfat noauto,users,umask=000  0 0
/dev/hdb1               /mnt/win_d      vfat auto,users,umask=000    0 0

# Flash Card Readers

/dev/sda                /mnt/flash1     vfat noauto,users,umask=000  0 0
/dev/sdb1               /mnt/flash2     vfat noauto,users,umask=000  0 0
/dev/sdb                /mnt/flash3     vfat noauto,users,umask=000  0 0

# NFS Drives on MOOMOO

192.168.1.101:/mnt/zip          /mnt/moozip     nfs noauto,rw,hard,intr,users 0 0
192.168.1.101:/mnt/win_c        /mnt/mooc       nfs noauto,rw,hard,intr,users 0 0
192.168.1.101:/home/moo_share   /mnt/moo_share  nfs noauto,rw,hard,intr,users 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink). Adding the following
# line to /etc/fstab should take care of this:
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will use almost no
#  memory if not populated with files)

#tmpfs /dev/shm tmpfs defaults

        0 0
none                    /dev/shm        tmpfs           defaults 
        0 0

#/dev/sdc2 /mnt/ipod vfat defaults,uid=500,gid=500,user,noauto 0 0 /dev/sdc2 /mnt/ipod vfat defaults,user,noauto 0 0