Skip to contentSkip to conversation

2.4.22 ACPI hangs up NFORCE2 system when using kudzu

BUG JSTHEMASTER 2 participants 2 messages Sep 21, 2003

lore
Share & tools
lore
#0 lore raw

[1.]
When using Kernel 2.4.22 (<= 2.4.21 works perfectly) ACPI on a system with NFORCE2 chipset the system hangs when starting kudzu without any output or log-entry!

[2.]
If you enable kernel 2.4.22 ACPI on a system running NFORCE2 chipset (I got a MSI K7N2 Delta-L mainboard) the system hangs
when using kudzu (Redhat Hardware detection tool, any version) without any output or log entry. I'm sorry, I was unable to monitor any crash dump information because the whole system hung up and didn't write any data. Kernels 2.4.21 or lower work fine.

[3.]
acpi, kudzu, nforce2, k72n delta-l, hwacpi, kernel 2.4.22

[4.] Linux version 2.4.22 (root@mrsuicide) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Fre Aug 8 02:24:50 CEST 2003

[5.] No message or log entry.

[6.] Get a NFORCE2 board and try kernel 2.4.22 with acpi.

[7.]
[7.1.] Gnu C 3.2.2

Gnu make               3.79.1
util-linux             2.11y
mount                  2.11y
modutils               2.4.22
e2fsprogs              1.32
jfsutils               1.0.17
reiserfsprogs          3.6.4
pcmcia-cs              3.1.31
quota-tools            3.06.
PPP                    2.4.1
isdn4k-utils           3.1pre4
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 2.0.11
Net-tools              1.60
Kbd                    1.08
Sh-utils               4.5.3
Modules Loaded         nvaudio nvidia i2c-nforce2 w83781d i2c-isa i2c-dev i2c-proc i2c-core ipt_state ipt_MASQUERADE iptable_nat ip_conntrack parport_pc lp parport iptable_filter ip_tables ppp_synctty ppp_async ppp_generic slhc nvnet nls_iso8859-1 nls_cp437 keybdev mousedev hid input rtc

[7.2.] processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2600+
stepping : 1
cpu MHz : 2079.544
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 4141.87

[7.3.]
nvaudio 39668 0 (autoclean)
nvidia 1764672 11 (autoclean)

i2c-nforce2             4040   0 (unused)
w83781d                24592   0 (unused)
i2c-isa                 1292   0 (unused)
i2c-dev                 4960   0 (unused)
i2c-proc                8052   0 [w83781d]
i2c-core               19556   0 [i2c-nforce2 w83781d i2c-isa i2c-dev i2c-proc]
ipt_state               1048  12 (autoclean)
ipt_MASQUERADE          2200   1 (autoclean)
iptable_nat            20824   1 (autoclean) [ipt_MASQUERADE]
ip_conntrack           26824   2 (autoclean) [ipt_state ipt_MASQUERADE iptable_nat]
parport_pc             18756   1 (autoclean)
lp                      8772   0 (autoclean)
parport                35968   1 (autoclean) [parport_pc lp]
iptable_filter          2412   1 (autoclean)
ip_tables              14648   6 [ipt_state ipt_MASQUERADE iptable_nat iptable_filter]
ppp_synctty             7840   0 (unused)
ppp_async               9376   1
ppp_generic            24316   3 [ppp_synctty ppp_async]
slhc                    6932   0 [ppp_generic]
nvnet                  30720   1
nls_iso8859-1           3548   1 (autoclean)
nls_cp437               5148   1 (autoclean)
keybdev                 2880   0 (unused)
mousedev                5428   1
hid                    22020   0 (unused)
input                   5664   0 [keybdev mousedev hid]
rtc                     8444   0 (autoclean)

[7.4.] 0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : w83627hf
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5000-5007 : nForce2 SMBus
5040-5047 : nForce2 SMBus
c000-cfff : PCI Bus #01
c000-c0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
c000-c0ff : 8139too
d000-d007 : PCI device 10de:0066 (nVidia Corporation) d400-d4ff : PCI device 10de:006a (nVidia Corporation) d400-d4ff : NVIDIA nForce2 Audio
d800-d87f : PCI device 10de:006a (nVidia Corporation) d800-d83f : NVIDIA nForce2 Audio
e400-e41f : PCI device 10de:0064 (nVidia Corporation) f000-f00f : PCI device 10de:0065 (nVidia Corporation) f000-f007 : ide0
f008-f00f : ide1

00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cd7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-00305268 : Kernel code
00305269-0038a943 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage 1fff3000-1fffffff : ACPI Tables
d0000000-d7ffffff : PCI device 10de:01e0 (nVidia Corporation) d8000000-dfffffff : PCI Bus #02
d8000000-dfffffff : nVidia Corporation NV10 [GeForce 256 SDR]
d8000000-d9ffffff : rivafb
e0000000-e1ffffff : PCI Bus #02
e0000000-e0ffffff : nVidia Corporation NV10 [GeForce 256 SDR] e2000000-e2ffffff : PCI Bus #01
e2000000-e20000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e2000000-e20000ff : 8139too
e3000000-e3000fff : PCI device 10de:0066 (nVidia Corporation) e3000000-e3000fff : nvnet
e3001000-e3001fff : PCI device 10de:006a (nVidia Corporation) e3003000-e3003fff : PCI device 10de:0067 (nVidia Corporation) e3003000-e3003fff : usb-ohci
e3004000-e3004fff : PCI device 10de:0067 (nVidia Corporation) e3004000-e3004fff : usb-ohci
e3005000-e30050ff : PCI device 10de:0068 (nVidia Corporation) e3005000-e30050ff : ehci-hcd

[7.5.] 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

      Latency: 0
      Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
      Capabilities: [40] AGP version 2.0
              Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
              Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4
      Capabilities: [60] #08 [2001]

00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

      Latency: 0
      Capabilities: [48] #08 [01e1]

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at e400 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e3003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e3004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 4
Region 0: Memory at e3005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 570c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d000 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

      Latency: 0 (500ns min, 1250ns max)
      Interrupt: pin A routed to IRQ 5
      Region 0: I/O ports at d400 [size=256]
      Region 1: I/O ports at d800 [size=128]
      Region 2: Memory at e3001000 (32-bit, non-prefetchable) [size=4K]
      Capabilities: [44] Power Management version 2
              Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 

PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-

      Latency: 0
      Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
      I/O behind bridge: 0000c000-0000cfff
      Memory behind bridge: e2000000-e2ffffff
      Prefetchable memory behind bridge: fff00000-000fffff
      BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

      Latency: 32
      Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
      I/O behind bridge: 0000f000-00000fff
      Memory behind bridge: e0000000-e1ffffff
      Prefetchable memory behind bridge: d8000000-dfffffff
      BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Allied Telesyn International AT-2500TX/ACPI
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256 SDR] (rev 10) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c41
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4

[7.6.] Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8320B Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02

[7.7.] -

[X.] If nothing works, a simple downgrade of ACPI modules would fix the problem...

Greeings,
Jan Schiefer!

#1 lore raw
Quoted 5 lines · JSTHEMASTER

[1.]
When using Kernel 2.4.22 (<= 2.4.21 works perfectly) ACPI on a system with NFORCE2 chipset the system hangs when starting
kudzu without any output or log-entry!

Quoted 7 lines

[2.]
If you enable kernel 2.4.22 ACPI on a system running NFORCE2 chipset (I got a MSI K7N2 Delta-L mainboard) the system hangs
when using kudzu (Redhat Hardware detection tool, any version) without any output or log entry. I'm sorry, I was unable to monitor any crash dump information because the whole system hung up and didn't write any data. Kernels 2.4.21 or lower work fine.

Not all nforce2 based motherboards. Most work fine AFAIK.

It sounds like it starts up OK though... I'd need the dmesg from during boot with ACPI and APIC enabled to try and diagnose the problem.